• Wind and Structures
• /
• 제23권6호
• /
• pp.485-503
• /
• 2016

To investigate the nonlinear aerostatic stability of the Hutong cable-stayed rail-cum-road bridge with ultra-kilometer main span, a FEM bridge model is established. The tri-component wind loads and geometric nonlinearity are taken into consideration and discussed for the influence of nonlinear parameters and factors on bridge resistant capacity of aerostatic instability. The results show that the effect of initial wind attack-angle is significant for the aerostatic stability analysis of the bridge. The geometric nonlinearities of the bridge are of considerable importance in the analysis, especially the effect of cable sag. The instable mechanism of the Hutong Bridge with a steel truss girder is the spatial combination of vertical bending and torsion with large lateral bending displacement. The design wind velocity is much lower than the static instability wind velocity, and the structural aerostatic resistance capacity can meet the requirement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.854-861
• /
• 2004

LRT(Light Rail Transit System) is devided into steel-wheel train, LIM and rubber tired AGT(Automated Guide-way Transit System) The main features of LRT are low construction cost, low space, low noise, Environment-friendly, fastly, low maintenance cost. it's a civil transit transfer system of new generation became popular advanced nation. In this study, the beginning designed manufactureing rubber tired AGT turnout and guide-way system for the field application. We hope reliability for the system shall home production of turnout and guide-way

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.600-606
• /
• 2007

복부 파형강판 거더와 복합 트러스 거더의 정적 및 동적거동 특성을 분석하기 위해 3차원 유한요소해석을 수행하였고, 이 결과를 등가보 이론에 의한 해석결과와 비교하였다. 등가보 이론은 트러스 구조의 모든 단면제원을 등가의 보로 치환함과 동시에 전단계수 등의 단면특성을 고려한 이론이다. 등가보 이론 적용 시 복부 파형강판 거더의 전단계수는 복부 단면적에 대한 전체 단면적의 비로 산정하였고, 복합 트러스 거더의 전단계수는 Abdel의 계산식을 사용하여 산정하였다. 정적해석 및 자유진동해석 결과 3차원 유한요소모델을 이용한 해석결과가 전단변형을 고려한 등가보 이론에 의한 해석결과와 잘 일치하였다.

• 한국철도학회논문집
• /
• 제11권5호
• /
• pp.499-503
• /
• 2008

교류전기철도 구간의 전차선과 급전선은 동일한 전철주에 설치된다. 전철주는 전차선과 급전선으로부터 각기 다른 하중을 받는다. 이러한 사실을 기본으로 새로운 형태와 재질의 급전선 금구를 고안하였다. 강관으로 디자인된 급전선 금구의 안전성을 FEM program을 통하여 시험하였다. 새로운 강관금구는 경제성측면에서 기존의 금구와 대비되며, 시험결과에서 금전선 금구고 안정적이고 경제적이라는 것을 알 수 있다. 따라서, 본 논문에서 제안한 금구는 VE 기본사항을 수행하였으며, 새로운 지지금구의 형태로 반영이 가능할 것이다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.19-26
• /
• 2014

콘크리트 방호벽 및 중앙분리대는 교량의 부속시설이지만, 슬립폼 시공과 넓은 비표면적으로 인해 초기재령 균열이 발생하기 쉽다. 본 연구에서는 대형 교량의 방호벽과 중앙분리대 콘크리트의 외관조사 및 비파괴실험을 수행하여 균열의 원인과 발생 균열의 패턴을 분석하였다. 이를 위해 시공기간을 고려하여, 건조수축, 수화열 해석이 수행되었으며, 현장의 환경조건을 고려하여 소성수축 특성을 평가하였다. 평가결과 대상구조물의 균열 원인은 철근위치에 따른 소성침하균열, 소성수축 및 건조수축에 의한 복부균열, 재료분리에 따른 상부균열로 추정할 수 있었다. 또한 균열원인과 발생 패턴을 도식화하였으며, 시공 및 재료분야에서 균열제어대책을 제안하였다. 해상위 교량에 설치하는 중앙분리대 및 방호벽 콘크리트는 환경조건 (풍속, 온도, 습도)에 매우 민감하여 초기재령균열이 쉽게 발생하므로 재료선택 및 시공방법에 신중을 기해야 한다.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.131-140
• /
• 2022

레일장대화는 무도상교량의 소음, 진동, 충격 등의 문제점을 해결할 수 있는 경제적인 방안 중 하나이며, 최근 연동식 침목고정장치를 이용한 SSF 공법이 개발된 바 있다. 이 연구에서는 연동식 침목고정장치 적용 시 레일 높이 조정 및 열차 통과 시의 충격 흡수를 목적으로 교량침목 하부에 삽입되는 침목패드의 최적 연직강성을 결정하는 과정을 제시하였다. 침목패드의 최적 연직강성 결정을 위하여 관련 기존 기준을 검토하였으며, 유연다물체동적해석을 통하여 침목패드의 연직강성 변화에 따른 주행안전성, 승차감 및 궤도의 안전성에 대한 지표들과 교량 응답 변화를 검토하였다. 유연다물체동적해석은 상용프로그램인 ABAQUS와 VI-Rail을 이용하여 수행하였다. 수치해석은 30m 상로판형교에 대한 교량모델을 이용하여 수행하였으며, 침목패드의 연직강성이 7.5kN/mm ~ 240kN/mm로 변화할 때 ITX 새마을, KTX 및 화차 통과 시의 응답을 산정하였다. 수치해석에 적용된 궤도구성품 조건에서 침목패드의 최적 강성은 100kN/mm로 산정되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.697-706
• /
• 2011

There are more than 800 railway steel plate girder bridges which are in use and the total length is approximately 50 km. Among these, it shall be pointed out that non-ballast rail systems which lay on wood sleepers are the most critical members. To strengthen this type of structures, mainly two methods have been applied. The first one is the most typical method which is to replace the girders with slab girder system or steel composite girders and to add ballast. It is not uncommon that the construction cost of substructure is more than ten time higher than that of superstructures and even in this case, the structural uncertainty for the substructures is not diminished. To resolve above mentioned problems, new method was developed to rehabilitate railway steel girder bridge by adding PC-slab using transport equipment. Using this method, substructure strengthen is rarely required because the additional weight to the bridge superstructure is only up to 1.0t/m. Also it was possible to save the construction cost by reducing construction duration and by simplifying the construction process. Experimental construction was performed for Jewon bridge and measurements were performed before and after construction to verify the bridge capacity.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.91-102
• /
• 2023

To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.745-750
• /
• 2000

The rigidity of pier is important in the analysis of rail on high speed railway bridges. This study is being performed because of followings. 1) Actual longitudinal stiffness of the structure including substructure should be considered in the calculation of longitudinal stresses in rails. 2) There are many uncertainties in piers and foundations for design. 3) Actual guideline for the design of piers is necessary. 4) Measurement on the rigidity of pier according to the types of pier, foundation and soil-condition is needed. Curve for rigidity will be obtained through this study and applied for actual design as the guideline. Stresses in rails can be estimates accurately. A pair of piers, which consists of pot-bearing for fixed support and pad-bearing for movable support, is loaded by steel frame through steel wire ropes. The responses which are intended to measure in the field test are displacements, forces and tilts on the top of piers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.19-24
• /
• 2003

Potential applications of foam-filled section are the automotive structures. A foam-filled section can be used for the front rail and firewall structures to absorb impact energy during frontal or side collision. In the case of side collision where bending is involved in the crushing mechanics, the foam filler will be significant in maintaining progressive crushing of the thin-walled structures so that more impact energy can be absorbed. In this study, the manufacturing process of closed cell aluminum alloy foam filled stainless steel tube was studied, and the various foam filled specimens including piecewise fillers were prepared, tested and discussed about the bending behaviors.