• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.836-842
• /
• 2007

Recently it is a tendency that Diesel rolling stock is committing in the commuter's train route of the suburb for solving commuting traffic congestion. It has advantage which expense of diesel rolling stock is relatively cheaper than electric rail car or high-speed train. In addition, it can be using the exist route without large-scale facility investment. Because of this advantage, the demand of diesel rolling stock occupy regular portion from overseas railway car market. GM/RT 2100 specifies the loads vehicle bodies shall be capable of withstanding, identifies how material data shall be used and presents the principles to be used for design verification by analysis. Therefore, in order to fulfill the structural requirements, Rotem Company has carried out Finite Element Analysis (FEA) to verify whether the carbody structure has enough strength to withstand the loads specified by GM/RT 2100. This research contains the results obtained by the analysis. The analysis was carried out using I-DEAS 12 NX Series

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.894-899
• /
• 2000

Optimization of 26 design variables selected from suspension characteristics for Korean High Speed Train (KHST) is performed according to the minimization of 58 responses which represent running safety and ride comfort for KHST and analyzed by using the each response surface model from stochastic design experiments. Sensitivity of design variables is also analyzed through the response surface model which ineffective design prameters to the performance index are screened by using stepwise regression method. The response surface models are used for optimizing design variables through simplex algorism. Values of performance index simulated by optimized design parameters are totally lower than those by initial design parameters. It shows that this method is effective for optimizing multi-design variables to multi-object function.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.215-224
• /
• 2008

In this paper, we introduced a linear motor-based transfer system with an active pid controller which can be replaced with an automated guided vehicle (AGV) for the port automation. This system, which is named LMCTS(liner motor-based container transfer system), is based on PMLSM (permanent magnetic linear synchronous motor) which basically consists of stator modules on the rail and shuttle car. Therefore more progressive and adaptive control mechanisms should be required to control a system with large variation of container weight, the difference of each characteristic of stator modules, a stator module's trouble etc. We introduced an active control mechanism with an online tuning scheme using modified evolutionary strategy. Some computer simulations are implemented to assess the robustness of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.22-23
• /
• 2015

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, at 30 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 10% compared with copper antenna

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1602-1607
• /
• 2014

This paper deals with the design and property analysis of 7kW-class small-scaled superconducting Linear Synchronous Motor (LSM) and testing equipment for a number of performance pre-tests prior to the development of coreless-type superconducting LSM suitable for 600km/h very high speed train. First, the basic design and property analysis are conducted before developing a small-scaled superconducting LSM model with 2-pole superconducting electromagnets, and additionally the cost-down design of the superconducting electromagnets is conducted to use less high-Tc superconducting wire. Finally, the superconducting magnet coil span is selected at 120mm, and input ground armature current of 670Aturns is required to produce 44.7N of thrust based on research findings.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.350-352
• /
• 2002

In order to speed up basic concept is to enhance high speed, curve limit speed, cross limit speed, acceleration/deceleration speed. It is important to optimal interface, fundamental technology of vehicle, rail, electrical power, and signal system. Tilting train has advantage minimizing investment cost of infra railway system for increasing train limit speed in curve. the developed tilting train should be operated to commercial service speed 180km/h of 200km/h at KNR upgrade railroad. This paper proposed the basic model of system engineering for developing of tilting EMU(maximum operation speed : 180km/h) with speed-up of conventional railway system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.653-658
• /
• 2009

This paper describes the structural deflection analysis method and result of EMU(Electric Multiple Units). During manufacturing of rail passenger coaches, the underframe is assigned a camber before it is integrated with other major assemblies of shell such as the side panel, the end panel and the roof. The camber of the positive deflection given intentionally to compensate for the sagging so that it remains straight at the maximum load. But some manufacturers have insisted there has no relationship between the camber and the safety or life cycle and they expect to reduce a manufacturing cost without a camber. So this study analyzes whether the camber influences on the safety or life cycle of EMU structure under a full load and regular driving condition. The structural dynamics model for a railway vehicle is introduced.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.257-264
• /
• 2003

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1024-1031
• /
• 2008

The performance of magnetic levitation controller is affected from not only levitation control algorithm but also the interaction between compositing system, so it is important to design maglev system considering the character of magnetic levitation controller in order to get the required performance of Maglev. The factors affecting the levitation controller of maglev are the dynamics of levitation magnet, the carrying weight of the overall system, the normal force and lateral force of traction motor and rail condition. In this paper the interaction between magnet and vehicle weight is analysed on side of stability of levitation controller in order to get the required performance of levitation controller.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.849-854
• /
• 2008

For the running safety assessment of Saemaul train passing through curves, an analysis model for multibody system has been developed. By using this model and ADAMS/Rail, sensitivity analyses depending on the variation of parameters related to the derailment coefficients have been conducted. According to the increase of running speed, the derailment coefficient and unload ratio were increased. At high speed, the derailment coefficient and unload ratio of left wheel showed higher than right wheel. If the cant increased, the derailment coefficient and unload ratio increased. but decreased based on the balance cant value by the curvature and running speed.