• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.328-333
• /
• 1996

Concrete can be defective for several reasons, including an inadequate design, material selection of workmanship, failure to appreciate the hazards associated with prevailing enviromental conditions. Concrete can also deteriorate or be damaged in use. Thus, it is necessary to evaluate the safety of existing concrete strucutres. On the basis of these reasons, they must be performed for repair or rehabilitation. Presently, strengthening methods of R/C structure used in Korea, are an enlargement of concrete member, strengthening with steel plate or CFRP on the R/C structure. It has been widely estabilished that strengthening effect of CFRP is superior to steel plate in terms of it's lighter unit weight and higher tensile strength. But there are no construction results of CFRP on the civil R/C structure in Korea. The strengthening design technique with CFRP, it's const겨ction, and it's strengthening effect for deteriorated R/C rahmen bridge is introduced in this paper.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.111-116
• /
• 2011

Consumers demand an increasing variety of requirements for the residential space as the quality of life improves. However, many apartment buildings with the bearing wall structure cannot meet such demands in Korea. A lot of construction resources are squandered and wastes are created as this type of residential buildings is reconstructed. The life of apartment buildings needs to be extended on the basis of easy remodeling of internal space in order to overcome the limits of the bearing wall structure. This research project aims to propose the Rahmen composite frame concept for the long life of apartment buildings. The Rahmen composite frame is expected to have better structural performance, constructability and economic feasibility than the bearing wall structure.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.61-69
• /
• 2024

고가의 혼화재 투입 없이 원심성형 공정 활용으로 콘크리트의 수밀성 증대를 통한 콘크리트 압축강도가 100MPa급인 초고강도 프리스트레스 각형보를 개발하였다. 피암터널 상부구조로 개발된 원심성형 각형보를 지역 소하천의 라멘교에 시공하였으며, 본 연구에서는 정적재하시험을 통하여 계측한 결과와 대상 구조물의 수치해석 결과를 바탕으로 비교, 분석하여 원심성형 각형보 라멘교의 공용내하력과 안전성을 평가하였다. 본 교량의 정·동적 재하시험과 수치해석 결과가 유사하게 나타났으며 원심성형 각형보의 거동을 잘 모사하는 것으로 확인되었다. 합성 라멘교를 구성하는 모든 원심성형 각형보는 설계활하중 하에서 충분한 내하력을 확보하는 것으로 평가되었고 안전성을 확보하여 구조적인 신뢰성을 입증하였다.

• 한국건축시공학회지
• /
• 제11권5호
• /
• pp.501-514
• /
• 2011

Recently, there have been many cases in which the difficulty of repair and replacement of principal elements in the bearing wall structure for apartment buildings, which is a major part of apartment buildings in Korea, has led to the reconstruction of buildings rather than their remodeling. To address this problem, the Korea government now allows a floor area ratio of up to 20 %, and has relaxed the building height limits to encourage the use of a rahmen structure instead of a bearing wall structure. However, since reinforced concrete rahmen structures have many problems, including higher floor height and greater construction cost, a great deal of research into rahmen composite precast concrete structures have been conducted. Green Frame, one of the developed prototypes, is expected to provide economic benefits through in-situ production for precast concrete column and beam. For in-situ production of composite precast concrete members, a detailed plan for production, curing, and installation is needed. However, it needs to be confirmed that the space is sufficient to produce the precast concrete members on-site before planning those activities. Therefore, this study proposes in-situ production analysis of composite precast concrete members of Green Frame with the evaluation of structural safety and available area on the parking structure. The result of this study shows that the in-situ production of precast concrete members is possible through a case study.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.211-218
• /
• 2001

There are numerous factors in designing the civil-structure even for simple ones. So the designer has to be decide for such conditions and this makes him difficult. Recently, some design programs are used for the design of civil-structure. But even for using the existing design programs, another program is necessary, such as a finite element analysis program. Moreover a few errors may be made in the drafts which must be coincided with the structural calculations. In this study, the design programs for rahmen bridge with single span and box culvert were developed to reduce the design efforts and the manmade errors. These two design programs perform structural analysis, calculations, and making report and draft at a time. In addition, These programs suggest manuals according to standard specifications and references for design. When these programs are used for design, it will be able to reduce the efforts and time of civil engineers.

• 한국지반신소재학회논문집
• /
• 제13권1호
• /
• pp.85-92
• /
• 2014

연약지반에 설치되는 구조물은 장기간에 걸쳐 발생하는 연약지반의 압밀 침하 또는 측방유동 현상에 의하여 많은 문제점들이 발생할 수 있다. 그러므로, 지반조사, 지반개량, 시공관리 등과 관련하여 적합한 설계 및 시공순서를 결정하는 것이 중요하다. 본 연구의 시공사례는 기초구조물로 지지되는 라멘구조물을 대상으로 하였다. 특히, 본 사례는 공사기간의 제약과 새로운 고속도로를 가로지르는 기존 도로의 연결 문제 등으로 구조물 하부 연약지반을 개량하지 않고 배면 성토를 시공하기 전에 구조물을 먼저 시공하였다. 이에 따라, 구조물의 안정성을 확보하기 위하여 수치해석 및 지반계측 결과를 바탕으로 시공절차 및 대책공법을 주의깊게 계획하였다. 시공과정 중에 여러 번의 시행착오를 거쳐 성공적으로 구조물 시공을 완료할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.361-374
• /
• 2020

Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived.

• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.69-80
• /
• 2003

This study researched problems of safety inspection method and current legislative system for the structure safety evaluation of Rahmen structure affected by remodeling. The elements of weight increase were examined in terms of differences of load moment, shear force, compressive stress and amount of steel before and after remodeling by structure analysis. The thorough examination for impacts of weight increase is indispensable to change of use or extension.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.979-984
• /
• 2001

The Sang-Jin bridge constructed by the Free Cantilever Method in 1985 is 4-span concrete rahmen bridge with a hinge at midspan. Due to the effect of creep, shrinkage of concrete and relaxation of tendon, the Sang-Jin bridge exposed the excessive displacement at midspan with the passage of time. In order to improve the load-carrying-capacity and durability of the bridge, needs to repair and rehabilitate the structure emerged. New rehabilitation methods were applied such as external prestressing of concrete box, application of pier pre-camber and steel truss jacking. Structural analysis and several tests including static load test, dynamic load test and ambient vibration test were executed to verify the improvement. The test result showed that the displacement of the midspan was improved by 10mm and it was verified that the stiffness of the bridge was increased. Totally, the load-carrying-capacity of Sang-Jin bridge was increased at least 1.56times which was attributed to the new rehabilitation method.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.301-309
• /
• 2011

현재 국내 주택의 근간을 이루는 내력벽식 공동주택은 구조적 한계로 인해 단수명화되고 있다. 이로 인해 발생하는 재건축은 막대한 자원 및 에너지 소비와 건설폐기물로 인한 환경오염을 유발하고 있다. 정부는 이러한 문제 해결의 방안으로 리모델링이 가능한 라멘구조를 유도하는 인센티브 제도를 시행하고 있다. 따라서 새로운 개념을 적용한 라멘구조의 공동주택을 위하여 개발된 복합PC구조인 Green Frame은 내력벽식 및 기존 라멘조식 공동주택이 리모 델링이 어렵다는 단점을 개선할 수 있을 뿐만 아니라 공사기간 단축이 가능할 것이다. 그러므로 본 연구에서는 Green Frame의 특성과 절대공기를 분석하고, 구조별 공동주택의 골조공사 공기와 비교 분석하여 차이점을 규명하였다. 그 결과 Green Frame을 공동주택에 적용할 경우 공기단축이 가능한 것으로 나타났다. 따라서 건설공사에서 공기는 매우 중요한 요소로 향후 성공적인 공동주택의 사업을 위해서 중요한 핵심기술로서의 역할을 할 수 있을 것으로 사료된다.