• 대기
• /
• 제25권1호
• /
• pp.99-115
• /
• 2015

To investigate the influences of the observational nudging and the analysis nudging on the WRF simulation for the heavy snowfall event in Yeongdong area on 26 February 2012, the sensitivity experiments in relation to nudging effects were conducted. We initially set the magnitude of nudging coefficient of $6.0{\times}10^{-4}s^{-1}$ to apply to the analysis nudging experiments and observational experiments. To select the optimized options for the observational nudging, the radius influence experiment was carried out with radii ranging from 10 to 25 km at 5 km intervals. Among the observational nudging experiments, the experiment, which was conducted with the option of the radius influence of 15 km and that of the nudging coefficient of $6.0{\times}10^{-4}s^{-1}$ (ONG exp.), showed a best result. As giving the nudging effect only directly on D1 and D2 brought about a better result for the analysis nudging, we set the analysis nudging experiment as above (ANG exp.). We compared and analyzed the results from the control experiment, ONG experiment, and ANG experiment to reveal nudging effects. It was found that the control experiment brought about a result that it overestimated its precipitation in comparison with the observation and failed to properly simulate the time zone of rainfall concentration. When either of the two nudging (observational and analysis nudging) was applied to the data assimilation, it brought about a better result than the control experiment. Especially the observational nudging led to a meaningful result for the wind field, while the analysis nudging had the best result for the precipitation distribution among the experiments.

• 한국수자원학회논문집
• /
• 제40권8호
• /
• pp.665-675
• /
• 2007

해안 지역 지하수 최적 관리의 기본계획 수립 단계에 사용될 수 있는 간편한 개발가능량 산정식이 제안되었다. 산정식은 대수층 특성, 해수침투허용 거리, 지하수 해안유출량 그리고 양수정의 위치 등 주요 영향 변수들의 함수이므로 합리적이며, 보편적으로 사용되는 해석 해들과 Ghyben-Herzberg 법칙을 이용하여 유도되었다. 산정식은 관련 변수들의 양 함수로 표현될 수 있으므로 그 적용이 매우 간편하다. 또한 주로 주관적 경험에 의하여 그 값이 결정되어 온 양수정의 영향반경을 대수층의 수리특성과 양수량 등의 함수로 산정할 수 있는 식이 제안되었다. 가상 유역에 대한 적용과 수치 해와의 비교분석을 통하여 제안된 식들이 보수적인 결과를 산출한다는 것을 보였다. 제안된 식들을 기존 관정들이 존재하는 유역에 적용하면 추가 개발가능량을 평가할 수 있다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.22-29
• /
• 2020

The analysis was carried out using the press molding analysis program by applying six parameters such as material type change, material thickness, friction coefficient, r_p, r_d and blank holder pressure. As a result of CAE analysis of the soft material DC04 and the relatively hard material HX300LAD, the thickness of the punch R part of the soft material was significantly reduced. The flange portion is greatly increased in thickness in the hard material by the compression action. As a result of considering the deformation amount of 0.6mm, 1.0mm, 1.5mm according to the material thickness, the influence of the thickness is considered to be very small. In case of the material thickness of 0.6mm, the rate of change increases due to the deep drawing depth relative to the material thickness. The sizes of the punches R and die R have the greatest influence on the change in thickness of the material in drawing molding, the smaller the punch R, the thinner the edges of the product, The larger the R of the die, the greater the material thickness of the flange portion. As the coefficient of friction and the blank holder pressure increase, the frictional force of the flange portion increases, which increases the radial force in the drawing process and increases the thickness change of the flange portion.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.9-17
• /
• 1998

The dependence of the ionic conductivity on the B-site ion substitution in (Li0.5La0.5)Ti1-xMxO3 (M=Sn, Zr, Mn, Ge) system has been studied. Same valence state and various electronic configuration and ionic radius of Sn4+, Zr4+, Mn4+ and Ge4+(4d10(0.69$\AA$), 4p6(0.72$\AA$), 3d10(0.54$\AA$) and 3d3(0.54$\AA$), respectively) induced the various crystallographic variaton with substitutions. So it was possibleto investigate the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic variations. We found that the conductivity increased with decreasing the radii of B-site ions or vice versa and octahedron distortion disturb the ion conduction. The reason for this reciprocal proportion of conductivity on the radius of B-site ions has been examined on the base of the interatomic bond strength change due to the cation substitutions. The results were good in agreement with the experimental results. Therefore it could be concluded that the interatomic bond strength change due to the cation substitutions may be the one of major factors influencing the lithium ion conductivity in perovskite(Li0.5La0.5) TiO3system.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.44-50
• /
• 2012

A new type of chemical oxidation technology utilizing micro bubble ozone oxidizer and a pneumatic fracturing equipment was developed to enhance field applicability of a traditional chemical oxidation technology using hydrogen peroxide as an oxidizer for in-situ soil remediation. To find an efficient way to dissolve gaseous ozone into hydrogen peroxide, ozone was injected into water as micro bubble form then dissolved ozone concentration and its duration time were measured compared to those of simple aeration of gaseous ozone. As a result, dissolved ozone concentration in water increased by 31% (1.6 ppm ${\rightarrow}$ 2.1 ppm) and elapsed time for which maximum ozone concentration decreased by half lengthened from 9 min to 33 min. When the developed pneumatic fracturing technology was applied in sandy loam, cracks were developed and grown in soil for 5~30 seconds so that the radius of influence got longer by 71% from 392 cm to 671 cm. The remediation system using the micro bubble ozone oxidizer and the pneumatic fracturing equipment for field application was made and demonstrated its remediation efficiency at petroleum contaminated site. The system showed enhanced remediation capacity than the traditional chemical oxidation technology using hydrogen peroxide with reduced remediation time by about 33%.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.179-183
• /
• 2011

본 연구에서는 광 반응기 내부의 영향반경을 평가하기 위해 자외선(UV-C) 램프의 강도와 photochemical에 의한 OH 라디칼 생성량을 측정하였다. 또한 $TiO_2$ (Degussa P-25)를 농도별로 첨가하여 자외선 램프의 영향반경을 측정하였다. 광 반응기는 아크릴 재질의 bath 타입을 사용하였고, 254 nm의 파장을 가진 UV-C 자외선 램프를(SANKYO DENKI, 지름 : 2.2 cm, 길이 : 18.5 cm) 사용하였다. 램프의 소비전력은 10.5 W이고, OH 라디칼 생성량을 측정하기 위해 KI dosimetry를 사용하였다. 실험 결과로부터 광 반응기에서 자외선의 강도가 0.367 mW/$cm^2$이상 조사되어야하고, 거리는 13 cm 이내에서 OH 라디칼 생성에 영향을 미치는 것으로 나타났다. 또한 광촉매 반응기에서는 촉매의 농도로 인해 자외선의 영향반경이 매우 감소하는 것을 확인할 수 있었다.

• 한국환경과학회지
• /
• 제28권9호
• /
• pp.737-749
• /
• 2019

In this study, the sensitivity analysis of hydraulic conductivity and separation distance (distance between injection well and pumping well) was analyzed by establishing a conceptual model considering the hydrogeologic characteristics of facility agricultural complex in Korea. In the conceptual model, natural characteristics (topography and geology, precipitation, hydraulic conductivity, etc.) and artificial characteristics (separation distance from injection well to pumping well, injection rate and pumping rate, etc.) is entered, and sensitivity analysis was performed 12 scenarios using a combination of hydraulic conductivity ($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$) and separation distance (10 m, 50 m, 100 m). Groundwater drawdown at the monitoring well was increased as the hydraulic conductivity decreased and the separation distance increased. From the regression analysis of groundwater drawdown as a hydraulic conductivity at the same separation distance, it was found that the groundwater level fluctuation of artificial recharge aquifer was dominantly influenced by hydraulic conductivity. In the condition that the hydraulic conductivity of artificial recharge aquifer was $10^{-2}cm/sec$ or more, the radius of influence of groundwater level was within 20 m, but In the condition that the hydraulic conductivity is $10^{-3}cm/sec$ or less, it is confirmed that the radius of influence of groundwater increases sharply as the separation distance increases.

• 한국안광학회지
• /
• 제10권4호
• /
• pp.347-355
• /
• 2005

색본 연구에서는 중심이 차폐된 광학계를 고려하여 중심차폐와 입사광의 가우시안 진폭의 단락된 정도에 따른 광학계의 성능을 평가하기 위해 중심 spot 분포와 에너지 분포를 조사하였다. 광학계에서 중앙 차폐 반경의 크기가 증가함에 따라 상면에서 중심 spot의 반경은 점점 작아지며, 가우시안 진폭의 단락된 정도가 증가할수록 상면에서 중심 spot의 반경은 증가하였다. 또한 광학계의 중앙 차폐된 영역과 가우시안 진폭의 단락된 정도가 증가할수록 초점이동에 따른 초점심도는 증가하였으며, 중심 spot에서의 encircled energy는 감소되었다. 이러한 결과로부터 중앙 차에가 증가할수록 가우시안 인자의 영향이 작음을 알 수 있었다. 이러한 연구결과는 대구경 반사광학계의 개발에 사용될 것이다.

• 한국정밀공학회지
• /
• 제3권1호
• /
• pp.69-76
• /
• 1986

The measuring Method by stylus, which measures surface roughness, has been widely used since G. Schmaltz developed the first equipment of that type. Withe the resent development of the measuring method by stylus, surface foughness testing instruments of the very high magnification ratio, hundreds of thousands, are manu- factured. However, as the techniques of the high precision roughness measurement are being required, the response problems due to the tip shapes and the plastic deformations of measured surface of mild material are to be serious factors. In this study, diamond stylus of tip radius $0.5\mu\textrm{m}$, $2\mu\textrm{m}$, $5\mu\textrm{m}$ and $10\mu\textrm{m}$ were used under the measuring force of 0.01gf, 0.02gf, 0.07gf, 0.4gf and 1.6gf, and from the experimental data, maximum measured value devrements between $2\mu\textrm{mR}$ stylus and $5\mu\textrm{mR}$ stylus, $2\mu\textrm{mR}$ stylus and $10\mu\textrm{mR}$ stylus are 22% and 31%, respectively when the measured value of $2\mu\textrm{mR}$ stylus goes to $0.01\mu\textrm{m Ra}$, $\lambda$ c2.5mm. And it is shown that plastic deformations on the plastic deformations on the measured surface are proportional to W/R(W;measured force, R;stylus tip radius).

• 대한교통학회지
• /
• 제29권2호
• /
• pp.71-80
• /
• 2011

도로를 이용하는 이용자에게 보다 합리적인 정보 제공 및 혼란을 방지할 수 있도록 하기 위해서는 안내지명의 연계성 확보가 중요하다. 본 연구에서는 안내지명의 지역적 특성 및 인지도를 반영한 지역의 중요도를 산출하여 이에 따른 영향권의 공간적 분석을 수행하여 합리적인 영향권을 제시하여 안내지명의 연계성을 확보하기위한 근거를 제시하였다. 안내지명을 선정함에 있어 의사결정 문제를 계층적으로 분석하여 대안을 결정하는 AHP 기법을 적용하여 각 안내지명의 지역적 특성 및 인지도를 반영한 상대적 중요도를 산정하였으며, 이를 이용하여 각 안내지명의 영향권 반경을 달리 설정하는 방법론을 구축하였다. 최종 영향권 반경을 설정하는 기준으로 사용한 효과 척도로서 영향권 중첩면적과 잔여면적의 합을 이용하여 그 값이 최적이 되는 대안을 최종 영향권 반경으로 결정하였다. 그 결과 본 연구에서는 안내지명의 영향권은 안내지명의 중요도에 따라 상이하며 평균적인 영향권의 범위는 중요지 11.4km, 주요지 5.9km로 나타났다.