• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.142-147
• /
• 2003

A study has designing on the structure of new radio relay for maritime safety communications system with economical and practical useful, that purpose be capable to exceedingly minimum the accident of small ship in sea, that is system. As Receive the urgency frequency from the SSB transceiver in a small fishery that transmit to convert VHF transceiver frequency. Otherwise, the VHF transmitter frequency is converting to the SSB receiver frequency. It has modeling of the bi-directional relay system, that is proposing the methode on the capability to mutual urgency communication between a SSB transceiver ship and VHF transceiver ship by new maritime safety communications system.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.345-359
• /
• 2011

Decode-and-forward relaying is a promising enhancement to existing radio access networks and is already standardized in 3rd generation partnership project (3GPP) as a part of long term evolution (LTE)-Advanced Release 10. Two inband operation modes of relay nodes are supported, namely type 1 and type lb. Relay nodes promise to offer considerable gain for system capacity or coverage, depending on the deployment prioritization, in a cost-efficient way. Yet, in order to fully exploit the benefits of relaying, the inter-cell interference which is increased due to the presence of relay nodes should be limited. Moreover, large differences in the received power levels from different users should be avoided. The goal is to keep the receiver dynamic range low in order to retain the orthogonality of the single carrier-frequency division multiple access system. In this paper, an evaluation of the relay based heterogeneous deployment within the LTE-Advanced uplink framework is carried out by applying the standardized LTE Release 8 power control scheme both at evolved node B and relay nodes. In order to enhance the overall system performance, different power control optimization strategies are proposed for 3GPP urban and suburban scenarios. A comparison between type 1 and type 1b relay nodes is as well presented to study the effect of the relaying overhead on the system performance in inband relay deployments. Comprehensive system level simulations show that the power control is a crucial means to increase the cell edge and system capacities, to mitigate inter-cell interference and to adjust the receiver dynamic range for both relay node types.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.545-563
• /
• 2015

Energy harvesting (EH) and network coding (NC) have emerged as two promising technologies for future wireless networks. In this paper, we combine them together in a single system and then present a time switching-based network coding relaying (TSNCR) protocol for the two-way relay system, where an energy constrained relay harvests energy from the transmitted radio frequency (RF) signals from two sources, and then helps the two-way relay information exchange between the two sources with the consumption of the harvested energy. To evaluate the system performance, we derive an explicit expression of the outage probability for the proposed TSNCR protocol. In order to explore the system performance limit, we formulate an optimization problem to minimize the system outage probability. Since the problem is non-convex and cannot be directly solved, we design a genetic algorithm (GA)-based optimization algorithm for it. Numerical results validate our theoretical analysis and show that in such an EH two-way relay system, if NC is applied, the system outage probability can be greatly decreased. Moreover, it is shown that the relay position greatly affects the system performance of TSNCR, where relatively worse outage performance is achieved when the relay is placed in the middle of the two sources. This is the first time to observe such a phenomena in EH two-way relay systems.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2017

Sudden natural disasters such as earthquakes, typhoons, heavy rainfall, etc., which come without warning, often threaten our lives and property, so it is important to spread the disaster quickly and accurately. Thus, in this paper, we present a method for the activating of FM radio receiver chip embedded in smartphone to receive disaster broadcasting in case of disaster. One is to investigate the roles and limits in a domestic disaster broadcasting system and disaster relay broadcasting by media, and the other is to present the method for the activation of smartphone FM radio receiver chip by conduct an expert survey.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.103-109
• /
• 2006

This paper suggests an efficient and comprehensive algorithm of the protection ratio derivation and illustrates some calculated results applicable to the initial planning of frequency coordination in the fixed wireless access networks. The net filter discrimination associated with Tx spectrum mask and overall Rx filter characteristic has been also examined to show the effect of the adjacent channel interference. The calculations for co-channel and adjacent channel protection ratios are performed for the current microwave frequency band of 6.7 GHz including Tx spectrum mask and Rx filter response. According to results, fade margin and co-channel protection ratio reveal 41.4 and 75.2 dB, respectively, for 64-QAM and 60 km at BER $10^{-6}$. It is shown that the net filter discrimination with 40 MHz channel bandwidth provides 28.9 dB at the first adjacent channel, which yields 46.3 dB of adjacent channel protection ratio. In addition, the protection ratio of 38 GHz radio relay system is also reviewed for millimeter wave band applications. The proposed method gives some advantages of an easy and systematic extension for protection ratio calculation and is also applied to frequency coordination in fixed millimeter wave networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.719-726
• /
• 2002

In WRC-2000, Resolution 734 was adopted to study the use of high altitude platform station(HAPS) operating in the bands above 30GHz. Therefore, frequency sharing feasibility between a new HAPS systems and an existing terrestrial fixed-service(FS) system should be analyzed primarily. In this paper, interference effects from the HAPS system into the radio-relay station are analyzed in terms of two cases; one is the interference distribution from the power-flux density(PFD) of HAPS airships, and the other the interference power from the ground stations. In conclusion, the new PFD criteria different from the exiting satellite system should be required, and the coordinated distance between the HAPS nadir and the radio-relay station should be 60km ∼ 253km for P$\sub$HG/ = -50dBW/MHz of transmitting power spectral density to share the new HAPS system into the existing FS system.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.365-373
• /
• 2019

This paper investigates the performance of a hybrid single input multiple output radio frequency/free-space optics (SIMO-RF/FSO) communication system. Each SIMO-RF link is modeled as an independent and identically distributed (i.i.d.) Rayleigh distribution, while the FSO link follows a generalized $M{\acute{a}}laga$ (M) distribution. Considering the fixed gain amplify-and-forward (AF) relay and misalignment errors, novel expressions for the outage probability (OP), average bit error rate (ABER) and average capacity are derived. Numerical results show that atmospheric turbulence and misalignment errors can seriously impair the system performance, and the hybrid RF/FSO communication system using SIMO-RF links can greatly improve system performance. We also analyze system performance under different types of modulation schemes. Numerical results are verified by Monte Carlo simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.29-39
• /
• 2009

The need for radio spectrum is recently considered as a huge hurdle towards the rapid development of wireless networks. Large parts of the spectrum are allocated to licensed radio services in proprietary way. However, enormous success of the wireless services and technologies in the unlicensed bands has brought new ideas and innovations. In recent years cognitive radio has gained much attention for solving the spectrum scarcity problem. It changes the way spectrum is regulated so that more efficient spectrum utilization is possible. Multi-hop relay technology on the other hand has intensively been studied in the area of ad hoc and peer-to-peer networks. But in cellular network, only recently the integration of multi-hop capability is considered to enhance the performance significantly. Multi-hop relaying can extend the coverage of the cell to provide high data rate service to a greater distance and in the shadowed regions. Very few papers still exist that combine these methods to maximize the spectrum utilization. Thus we propose a network architecture combining these two technologies in a way to maximize the system throughput. We present the throughput capacity equations for the proposed system model considering various system parameters like utilization factor by the primary users and primary users' transmission radius and through extensive numerical simulations we analyze the significance of work.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.67-76
• /
• 2013

Under an imperfect channel estimation, a Device-to-Device (D2D) communication framework based on MIMO relay technology is presented. The model consists of a D2D pair equipped with M antennas and a relay equipped with N antennas as well as a cellular user equipped with M antennas. The outage probability under different relaying protocols (i.e. AF and DF protocol) with and without considering a direct link was derived. The actual and theoretical outage probability of the five links under different antenna numbers was emulated. The number of user antennas and channel estimation error was analyzed carefully to determine their impact on the outage probability of a system. The simulation verified the theory analyses and the results showed that MIMO relaying improves the D2D communication system performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1638-1653
• /
• 2014

A sequential optimization algorithm (SOA) for resource allocation in a cyclic-prefixed single-carrier cognitive relay system is proposed in this study. Both subcarrier pairing (SP) and power allocation are performed subject to a primary user interference constraint to minimize the mean squared error of frequency-domain equalization at the secondary destination receiver. Under uniform power allocation at the secondary source and optimal power allocation at the secondary relay, the ordered SP is proven to be asymptotically optimal in maximizing the matched filter bound on the signal-to-interference-plus-noise ratio. SOA implements the ordered SP before power allocation optimization by decoupling the ordered SP from the power allocation. Simulation results show that SOA can optimize resource allocation efficiently by significantly reducing complexity.