• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.291-296
• /
• 2006

The restrictions concerning the use of the radio waves have become severe, the marine radar with low spurious is being developed. Therefore, it is necessary to develop aids to navigation as a radar beacon can respond to new type of marine radar. Because the system of radar in the future is an indetermination, new radar beacon should correspond to old and new radar system during a transition period. New radar beacon that is also able to respond to pulse radar, pulse compression radar and FM-CW radar were considered in these years in Japan. The sign of the response of Morse code in a new system is generated by the delay synthesis system. Computer simulation and actual examination using trial circuit were curried out. A big possibility was set up in the development of the new radar beacon that was able to correspond to old and new radar system. These results and the state of new radar beacon is mentioned in this paper.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.70-73
• /
• 2014

In this paper, we measure and analyze strength of Beacon signal in Picocell environment by using the frequency of WiFi of ISM band. It is displaying the value what measured by using a beacon signal measurement smartphone app in using AP area, on Google maps using the PC application. the data measured by using mapped GPS signal and RSSI of beacon signal, and convert this data to Position coordinates for Google map in PC. when use this system, we can understand and analyze changes of radio signal through location where installed AP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1040-1044
• /
• 2005

This paper presents a method for the robot localization and calibration using the ultrasonic and the radio frequency. The distance between the receiver and a beacon can be computed by using the difference between times of flight. The presented method uses the gradient of the maximum amplitude of the ultrasonic in order to measure the time of flight precisely. The measured three distances between the receiver and the beacon are used to compute the robot position by the direct inverse method and the iterated least square approximation method. This paper is defined the calibration as the problem to find the location of 3 beacons and 3 robots, and presents 3 methods for it and found the 2B2R method as the best among them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.790-799
• /
• 2007

In this paper, we propose WLAN CR coexistence beacon protocol for thenext WLAN network. This method can provide WLAN with high-speed data rate in new WLAN architecture and network platform based on cognitive radio technology. WLAN CR devices that enter the CR network can know UHF channels by listening CR beacon including the coexistence parameter set and start using CR channel fast. During handover of WLAN device in UHF spectrums, WLAN device that lost their channel can change available channel by obtaining the current CR channel information from the CR beacon. In advance relaying coexistence parameter set to entire CR system, WLAN CR system can prepare own candidate channel set that is different with other CR system. In CR beacon and relay delay, we show the results that WLAN CR coexistence beacon protocol supports spectrum handover efficiently and decreases the probability of collision in candidate channel set.

• Journal of Information Processing Systems
• /
• v.6 no.2
• /
• pp.147-162
• /
• 2010

In this paper, we present a fine-grained localization algorithm for wireless sensor networks using a mobile beacon node. The algorithm is based on distance measurement using RSSI. The beacon node is equipped with a GPS sender and RF (radio frequency) transmitter. Each stationary sensor node is equipped with a RF. The beacon node periodically broadcasts its location information, and stationary sensor nodes perceive their positions as beacon points. A sensor node's location is computed by measuring the distance to the beacon point using RSSI. Our proposed localization scheme is evaluated using OPNET 8.1 and compared with Ssu's and Yu's localization schemes. The results show that our localization scheme outperforms the other two schemes in terms of energy efficiency (overhead) and accuracy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.84-92
• /
• 2009

In this paper, using the received signal strength of radio beacon such as Wi-Fi, Bluetooth, CDMA and GPS signal from the satellite, we propose the system of positioning which considered indoor and outdoor based on the Place Lab. Conventional Place Lab utilize the various positioning parameters to estimate the indoor location. However, this conventional system has limitations with respect to the range and efficiency of usage. Therefore, we defined the converged model of multisensor data and re-organized the Place Lab to overcome the limitation of a conventional system. Proposed system uses the radio beacon signal and GPS signal together to estimate the location. Furthermore, it provides the seamless PNS service with many mobile devices because this system realized by the OSGi bundle. This proposed system has evaluated the performance with SAMSUNG T*OMNIA SCH-M490 smart phone and the result shows the system is able to support the PNS service.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.47-57
• /
• 2007

In this paper, optimal parameters of a hopping pilot beacon are analyzed in a CDMA mobile cellular network. The hopping pilot beacon is used for inter-frequency handoff. It can reduce the number of pilot beacons needed for the inter-frequency handoff by transmitting neighbor frequency pilots periodically through a pilot beacon. The optimal parameters for transmission time and period of the hopping pilot bacon are derived by mathematical approach. It is highly recommended that the optimal values for the hopping pilot beacon under various operation environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.345-347
• /
• 2016

Recently location based services is being expanded into the indoor service that can not access to the outdoor location informations, such as GPS. Thus, the research and development of an indoor positioning system with BLE(Bluetooth Low Energy) iBeacon technology has expanded. However, RSSI (Received Signal Strength Indicator) that is used as the distance information between the terminal and for positioning iBeacon signal has a problem in that distortion occurs, information such as the signal attenuation and the delay due to the characteristics of radio waves. In this paper, we propose a reliable method of verifying iBeacon signal with the signal distortion problems for reliable indoor positioning systems.

• Journal of Industrial Convergence
• /
• v.16 no.2
• /
• pp.1-14
• /
• 2018

The interconnectedness of all things is continuously expanding. For example, bluetooth low energy (BLE) beacons are wireless radio transmitters that can send an identifier to nearby receivers and trigger a number of applications, from proximity marketing to indoor location-based service. iBeacon technology which is one of the newest technologies in the smart tourism field, is reckoned as being very useful for travelers in enhancing the experience with visiting places. However, there is consequently not much existing research yet about the connection between iBeacon technology and tourism destination. Considering that, this study analyzes the adoption of iBeacon in tourism destination, this study examine the interrelationships and feedback structures of key factors in iBeacon adoption. To serve the purpose, this study used system dynamics approach to develop a model of iBeacon adoption in tourism destination. The analysis results showed that the concept of 'Social Influences' is one of the significant predictors for individual's intention behavior to accept iBeacon, and word of mouth (WOM), subjective norm, privacy concern, and perceived usefulness are key factors influencing the iBeacon adoption.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.63-69
• /
• 2014

For the safety messages in IEEE 802.11p vehicles network environment(WAVE), strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. WAVE standards apply multiple radios and multiple channels to provide open public road safety services and improve the comfort and efficiency of driving. Although WAVE standards have been proposed multi-channel multi-radio, the standards neither consider the WAVE multi-radio environment nor its effect on the beacon broadcasting. Most of beacon broadcasting is designed to be delivered on only one physical device and one control channel by the WAVE standard. also conflict-free channel assignment of the fewest channels to a given set of radio nodes without causing collision is NP-hard, even with the knowledge of the network topology and all nodes have the same transmission radio. Based on the latest standard IEEE 802.11p and IEEE 1609.4, this paper proposes an interference aware-based channel assignment algorithm with Nash bargaining solution that minimizes interference and increases throughput with wireless mesh network, which is deigned for multi-radio multi-cahnnel structure of WAVE. The proposed algorithm is validated against numerical simulation results and results show that our proposed algorithm is improvements on 8 channels with 3 radios compared to Tabu and random channel allocation algorithm.