• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.158-162
• /
• 2012

In this paper, we propose a wireless modem, which used OFDM/64QAM method and the ISM band with 2.4GHz radio frequency. In this paper proposed the case of a modem, the main program to process the baseband processor, processing speed, operating voltage, and reliability should be ensured. So we have designed with Ralink's RT2870, witch was used for Wi-Fi solution. The RT2870 provides full support for wireless LAN standard, and supports various modulation formats, 2.4GHz and 5GHz bands, both of which support chip. In this paper, we also output the modulated signal transmitted wirelessly to the 2.4GHz band RF RT2850 chip processing was applied and using 40MHz band 2.422 ~ 2.462GHz wireless bands were designed to occupy. By applying bi-directional transmission between wireless transmitter and receiver, it can be effectively connected with any kinds of wireless LAN with 2.4GHz ISM band. Therefore it could economically be used as peripheral equipments for POS system or personal wireless device based on Android platform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.446-452
• /
• 2009

OFDM system has a disadvantage of sensitiveness about the effect of frequency offset caused by the discord of oscillators in the transmitter and receiver. Either, the frequency offsets in mobile radio channels distort the orthogonality between sub-carriers resulting in the inter-carrier interference(ICI). In this paper, we analyze the effect of the ICI and propose a new method using SC technique. To analyze BER(Bit Error Rate) and CIR(Carrier to Interference Ratio) performance of the proposed method. the simulation program MATLAB is used. By the simulation results, SNR performance is improved by this method. In case the frequency offset is 0.3 and 0.5, SNR gains are over 0.5dB and 1dB in the BPSK modulation and 1dB and 2dB in the QPSK modulation at BER of $10^{-3}$ respectively. In addition, CIR performance is improved over 15dB. As a result, the proposed method is more effective to improve the system performance than the conventional method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.243-246
• /
• 2008

ISM(Industrial, Scientific, Medical)대역은 비면허 대역으로 일정한 출력 규제만 지키면 자유롭게 사용할 수 있다는 장점으로 인하여 육상 통신뿐만 아니라 해상 통신 영역까지 그 사용량이 급증하고 있다. 이에 어선 내에서 사용하는 전파응용설비 및 ISM대역을 사용하는 소출력무선기기 등과의 전파간섭 문제는 시스템의 안정성을 열화시킬 수 있는 요인이 되며, 선박상황을 고려하면 안전성과 직결되므로, 간과되지 말아야 한다. 따라서 ISM대역에서 사용되거나 사용될 무선설비의 간섭확률 분석은 필수적이다. 본 논문에서는 Monte-Carlo 방식을 기반으로 하는 SEAMCAT를 이용하여 거리 및 밀도에 따른 간섭 시나리오와 전파 간섭 simulation methodology를 제안하였으며, 해상에서 환경을 가정하여 다른 전파간섭을 배제하였다. 제안된 시나리오를 적용하여 13.56MHz ISM 대역의 거리 시나리오 시뮬레이션 결과 RFID는 4.7m 이상, 모형기기는 2.7m 이상의 동종 기기간 이격거리를 가질 경우 간섭 영향이 양호하였다. 밀도 시나리오 시뮬레이션 결과 RFID(${V_r}$)를 중심으로 간섭 영향권에 RFID와 모형기기가 각각 2개 이하, 모형기기(${V_r}$)를 중심으로 간섭 영향권에 모형기기 2개 이하, RFID 1개 이하로 사용될 경우 통신환경이 양호함을 알 수 있었다. 제안된 간섭 시나리오 및 시뮬레이션 기법은 향후 ISM대역의 규제 정책 및 간섭확률 분석에 기여할 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2073-2085
• /
• 2012

Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.341-349
• /
• 2003

A real time interactive controller (spectrometer) for magnetic resonance imaging (MRI) system has been developed using high speed digital signal processors (DSP). The controller generates radio frequency (rf) waveforms and audio frequency gradient waveforms and controls multiple receivers for data acquisition. By employing DSPs having high computational power (e.g., TMS320C670l) real time generation of complicated gradient waveforms and interactive control of selection planes are possible, which are important features in real-time imaging of moving organs, e.g., cardiac imaging. The spectrometer was successfully implemented at a 1.5 Tesla whole body MRI system for clinical application. Performance of the spectrometer is verified by various experiments including high- speed imaging such as fast spin echo (FSE) and echo planar imaging (EPI). These high-speed imaging techniques reduce measurement time, however, usually intensify artifact if there is any systematic phase error or jitter in the synchronization between the transmitter, receiver, and gradients.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.19-26
• /
• 1998

In this paper, we studied the design and implementation of fading compensation systems at aspects of narrowband mobile communication using TTIB SSB. The mobile radio channel with multipath fading places fundamental limitations on the performance of wireless communication systems. The multipath fading is compensated using pilot tone in TTIB SSB. The TTIB transceiver was implemented using the prevailing digital signal processing (DSP) techniques and compensation for the multipath fading was incorporated in the receiver in the form of DSP algorithm. In order to evaluate fading compensation performance in TTIB transceiver, we first used computer simulation. In the simulation results, we found that the TTIB transceiver could compensate for the multipath fading as expected. Second, we carried out some experiments on TTIB transceiver implementation with DSP boards and later with hardwares including RF circuits with center frequency of 145MHz. Through these experiments, we found that fading compensation performance in TTIB transceiver was almost as good as that obtained from simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.255-258
• /
• 2014

Imaging in bistatic radar has been known a more difficult task than that in monostatic radar. It is because the behavior of the bistatic range and the bistatic Doppler due to the motion of a transmitter and a receiver is so random that the compensation procedure, which we call an imaging algorithm, is quite complicated. This paper presents a bistatic radar imaging algorithm that can be used in some specific bistatic radar geometry. We show this geometry can present rectangular-like resolution cell on isorange-isoDoppler contours map. We also present the associated resolution and simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.979-986
• /
• 2013

In this paper, a TVS diode which is commonly used as a ESD protector in wireless communication devices could cause antenna wireless sensitivity to decrease has been analyzed. When a smartphone doesn't have enough space to place many components, there would be its speaker near antenna area. In order to protect ESD coming through the speaker there also could be a TVS within antenna GND area. Digital audio signal which was sent to speaker and CDMA RF communication signal coupled from antenna was mixed by TVS. And this leakage current running through TVS resulted in decrease of antenna wireless sensitivity. The results of various experiments can be explained using circuit simulation. Following works will give us some insights that can reduce unwanted summation of digital and RF signal due to nonlinearity of ESD protectors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.407-408
• /
• 2016

A drone has been popularized to such an extent as to be seen in the near parks recently. The drone refers to an unmanned aerial vehicle(UVA) which can fly and be steered by a radio wave without a pilot and it has a airplane or helicopter shape. The drone was first started to be used from military purpose, but its usage has been expanded to the private such as broadcast shooting, crop-dusting, field discovery and hobby. However the drone that we can see often in the market is expansive, hard to be repaired when it broken down and has a discomfort of the short flight time. In this paper, to solve an uncomfortable talk on the cheap ATmega128 Using (Quad copter) drone for implementation. Axes gyroscope and accelerometers mcu between posture an attitude control, communications through drone control, pid. Receiver input them into transmitter signals of movements to control drone c the programming was implemented in on the basis of language.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.127-134
• /
• 2002

GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere and US DoD's systematic errors. The solution of these restrictions is the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we designed and implemened a RTK-GPS error correction signal transmission system for long-distance using the TCP/IP, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.