• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1148-1154
• /
• 2011

Vending machines to release single-use RF(Radio Frequency) transport cards at Seoul Metro stations are operated under unmanned facility and have release & charge function. This Paper introduces function, configuration of vending machine to release single-use RF transport cards, the basic concepts & overview about vending machine's operating system. And suggests programming procedure to develop OS image of Windows Embedded operating system which is onboard the main board's electronic circuitry.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.103-104
• /
• 2008

Radio-frequency(RF) weldable polyurethane-coated fabric was prepared by knife coating of presetted and cire-finished nylon fabric using optimized coating formulation including RF-sensitive commercial polyurethane resins. The physical properties, adhesion strength, peeling strength, abrasion strength, flexibility, and hydrostatic water resistance of the prepared coated fabric were good enough to show no significant difference with regular coating. Additionally the prepared coated fabric had silky and soft touch without tackiness.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.23-31
• /
• 2005

ITS(Intelligent Transportation System) implementing information collection services and information support services for cars of moving fast needs a communication system of special aim such as RF-DSRC(Radio Frequency Dedicated Short Range Communication). Before RSE(Road Side Equipment) and OBE(On-Board Equipment) will be able to communicate RF-DSRC, OBE first have to request Link Initialization Access using ACTC(Activation Channel) in allocated ACTS(Activation Slot) by Slotted ALOHA. Even though Link Initialization Access is a important element to decide performance of communication system, optimal mathematic modeling study of Link Initialization Access which is adapted RF-DSRC characteristics is not enoush. So, in this paper, we propose mathematical modeling about Link Initialization Access of RF-DSRC. And then we computed Link Initialization Access probability defining offer load(G) which is adapted RF-DSRC characteristics for analyzing performance of modeling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.501-509
• /
• 2011

Software defined radio(SDR) has a goal that places the analog-to-digital converter(ADC) as near the antenna as possible. But current technique actually can't do analog-to-digital converting about RF band signals. So one method is studying that samples RF band signals to IF band. One of the ways Sub-Sampling technique can convert signals from RF band to IF band without oscillator. If Sub-Sampling technique is used, over 2 bands can convert signals from RF band to IF band. But due to the filter performance in RF band, it is possible to generate interference between signals that is converted in low frequency band. The effect degrades performance. In this paper, we propose one method that uses time division multiplexing(TDM) method as a solution to avoid interference between signals. By doing TDM and Sub-Sampling at the same time that method can get signals without large changes of structures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.583-584
• /
• 2006

This paper presents transistor matching in 70 nm nMOS. To adopt radio frequency(RF) applications, the RF performance, especially the current gain cutoff frequency($f_T$), is examined experimentally through a wafer. It is proved that the RF performance variation of 70 nm nMOS is dependent to the device geometry, the total width(W). The RF performance variation of 70 nm nMOS is inversely proportional to square root of total width(W). Also, decreasing of the number of fingers($N_f$) is helpful to decrease the variation of 70 nm nMOS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.493-499
• /
• 2011

To improve the bandwidth efficiency of conventional orthogonal modulation, the MCTO(Multi-Code Trans-Orthogonal) modulation, which is modified orthogonal modulation, was proposed. However, the RF(Radio Frequency) power amplifier for the MCTO modulation is too complex to reject the amplitude distortion due to the non-constant amplitude property of the MCTO. Therefore, in this paper, CAMCTO(constant-amplitude multi-code trans-orthogonal) modulation is proposed by using the constant-amplitude encoding algorithm for multi-code signal. Additionally, the performance of the proposed CAMCTO modulation is compared with those of the orthogonal modulation and the MCTO modulation by using the computer simulation. The computer simulations show that the bandwidth efficiency of the proposed CAMCTO modulation is better than that of the conventional orthogonal modulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.81-85
• /
• 2009

We has been analysed optical properties of OLED(organic light emitting diode) and characteristics of ITO(Indium Tin Oxide) in terms of $O_2$ plasma treatment for manufacturing high efficiency OLED, RF power of $O_2$ plasma was changed 25, 50, 100, 200 W. $O_2$ gas flow, gas pressure and treatment time were fixed. Sheet resistance and surface roughness of ITO were measured by Hall-effect measurement system and AFM, respectively. The ranges of sheet resistance and surface roughness were $5.5{\sim}6,06\;{\Omega}$ and $2.438{\sim}3.506\;nm$ changing of RF power, respectively, PM(Passive Matrix)OLED was fabricated with the structure of ITO(plasm treatment)/TPD($400\;{\AA}$)/$Alq_3(600\;{\AA})$/LiF($5\;{\AA}$)/Al($1200\;{\AA}$). Turn-on voltage of PMOLED was 7 V and luminance was $7,371\;cd/m^2$ at the RF power of 25 W, $O_2$ plasma treatment of ITO surface was result in lowering the operating voltage and improving luminance of PMOLED.

• Journal of Powder Materials
• /
• v.26 no.4
• /
• pp.305-310
• /
• 2019

In the present work, spheroidization of angular vanadium powders using a radio frequency (RF) thermal plasma process is investigated. Initially, angular vanadium powders are spheroidized successfully at an average particle size of $100{\mu}m$ using the RF-plasma process. It is difficult to avoid oxide layer formation on the surface of vanadium powder during the RF-plasma process. Titanium/vanadium/stainless steel functionally graded materials are manufactured with vanadium as the interlayer. Vanadium intermediate layers are deposited using both angular and spheroidized vanadium powders. Then, 17-4PH stainless steel is successfully deposited on the vanadium interlayer made from the angular powder. However, on the surface of the vanadium interlayer made from the spheroidized powder, delamination of 17-4PH occurs during deposition. The main cause of this phenomenon is presumed to be the high thickness of the vanadium interlayer and the relatively high level of surface oxidation of the interlayer.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3768-3774
• /
• 2023

The purpose of the target system for the muon spin rotation, relaxation, and resonance (µSR) facility at the Rare isotope Accelerator complex for ON-line experiments (RAON) is to induce the production of a significant number of surface muons in thermally stable experiments. The manufactured target system was installed at RAON in the Sindong area near Daejeon in 2021. The design was made conservatively with a sufficient margin of safety through ANSYS calculations; however, verification experiments had to be performed on the ANSYS calculations. Because the 600-MeV proton beam has not yet been provided, an alternative way to reproduce the calculation conditions was required. The radio frequency (RF) heating method, which has not yet been applied to the target verification experiment but has several advantages, was used. It was observed that the RF heating method has promise for testing the thermal stability of the target, and whether the target system design process was performed conservatively enough was verified by comparing the RF heating experiments with the ANSYS calculations.