• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.105-111
• /
• 2005

This paper presents the basic characteristics of a cutoff cavity-backed aperture antenna with a feed post and a parasitic post inserted parallel to the aperture. It is shown that this type of antenna forcibly resonates the cutoff cavity by adding a single external reactance to the parasitic post. The Galerkin's method of moments is used to analyze integral equations for the unknown electric current on each post and the aperture electric field on the aperture. The value of an external reactance for forced resonance is analytically obtained by deriving a determining equation. Also the current distribution on each post, aperture electric field distributions, and the radiation patterns are discussed. The theoretical analysis is verified by the measured return loss and radiation patterns.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.37-42
• /
• 2001

This paper presents the basic characteristics of a cutoff cavity-hacked slot antenna, for the application of spacetenna, with a feed post and a parasitic post inserted parallel to the slot. This type of antenna might effectively excite the slot and forcibly resonate the cavity by adding external reactance to the parasitic post. The Galerkin\`s method of moments is used to analyze integral equations for the unknown electric current on each post and electric field in the slot. The value of external reactance for forced resonance is discussed by deriving a determining equation, the current distribution on each post and the radiation patterns are considered. The analysis is in excellent agreement with the experiment for the radiation patterns.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.108-114
• /
• 2017

We have experimentally analyzed the self-radiation impedance of an ultrasonic transducer with a square radiation surface that is used as a vibrator in underwater ultrasonic detection systems. The radiation reactance and the radiation resistance were measured in the range from 1 to 3 of ka that is the product of a wave number and a length of the edge of the square vibrator. By comparing the measured results with those of theoretical calculation of the radiation impedance using a series, we confirmed the validity of the experimental method and experimentally confirmed the variation trend in the radiation impedance of the square radiation surface.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.21-26
• /
• 1995

In this paper integral equations are derived and simulated numerically for the mutual radiation impedance of an acoustic transducer in a Plane array. It is assumed that the pistons are mounted in the rigid infinite baffle. The mutual radiation impedance is separated into resistance and reactance and plotted as a function of ka and kd. Mutual radiation resistance is decreased and perturbed according to increase of ka. Mutual radiation reactance is decreased along to increase of ka. Mutual impedance is decreased when kd is increased. However, when ka is 6, 13, and 19 the interaction effect is decayed. When the relative piston position of the two pistons is 45 degree, the amount of interaction becomes minimized.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.278-285
• /
• 2000

This paper presents the basic characteristics of the beam tilting dipole antenna element in which one reactance element is used for the impedance matching at the feed point. The radiation pattern is tilted by the properly determined driving point position, and the loading reactance is used to obtain forced resonance without great changes in tilt angle. The numerical results demonstrate that the reactance element should be loaded in the region where the driving point is placed to obtain forced resonance of the antenna with little changes in beam tilt angle. In case the proposed forced resonant beam tilting antenna with $0.8\lambda$ length is driven at $0.2\lambda$ from the center, the main beam tilt angle o.5 57.7 degrees, the highest power gain of 8.6 dB are obtained.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.58-62
• /
• 1995

Integral equations of self-radiation impedance of a rectangular piston in a rigid infinite baffle are derived using by polar coordinate. The self-radiation impedance is separated by two parts ; self-radiation resistance and self-radiation reactance. Derived integral equations are simulated by numerical method. Based on the numerical results, self-radiation impedance can be obtained in the low and high frequency ranges without any limited conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.82-88
• /
• 1995

Conductance and susceptance of the self-radiation impedance in a rectangular acoustic sensor without baffle are measured experimentally. Finite polyurethane window is mounted at the end of the acoustic sensor. The sensor radiation impedance is cauculated using the equivalent electric circuit. Using the Levine's integral equations of a rectangular piston mounted to the rigid infinite baffle, radiation resistance and reactance were simulated numerically. Numerical and experimental results are compared to each other.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.23-29
• /
• 1994

In this paper, the measured in-water radiation impedance of cylindrical piezoelectric radiator with finite baffle is compared to the existing theoretical result of that with infinite baffle and the effect of baffle on the radiation impedance is examined. Comparision between measurement and theoretical result of radiation impedance shows that the measured radiation impedance tends to be that of the infinite baffle as the baffle length increases. Another finding of the comparision in that the effect of baffle is more dominant in radiation reactance than in radiation resistance. Therefore, for the use of theoretical radiation impedance of infinite baffle on the design of acoustic transducer, the impedance compensation to the baffle length should conducted.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1070-1076
• /
• 2007

In this paper, we study the characteristics of dual band microstrip antenna with the wedge-shaped radiation patch added the slot using air substrate. Wedge-shaped patch antenna with air substrate is avoided the large probe reactance associated with a thick substrate owing to the use of short probe and good impedance matching over a wide frequency range can be obtained. Slot on the antenna radiator varies the reactance component according to the employed frequency and affect the resonance freaqency of the antenna, therefore the antenna can resonate at the dual band(cellular and PCS band). The slot length and position have an effect on the bandwidth and input impedance of the antenna are optimized by simulation. From the experiment results for the fabricated antenna, -10 dB of $S_{11}$ is content with the allocated bandwidth of Cellular and PCS system and - 15 dB of cross polarization level. From the results of this paper, it has been confirmed that the proposed antenna can be used as the base station antenna fur Cellular and PCS band.