• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1157-1164
• /
• 2001

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few research have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan. We assume that the impeller rotates with a constant angular velocity and the flow field of the impeller is incompressible and inviscid. So, a discrete vortex method(DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowsons method is used to predict the acoustic source. In order to compare the experimental data, a centrifugal impeller and wedge introduced by Weidemann are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.368-371
• /
• 2020

본 논문에서는 휴대용 UHF대역 RFID 시스템을 위한 선형 테이퍼드 슬롯 정류 안테나를 제안하였다. 제안한 정류 안테나는 별도의 유전체 기판을 사용하지 않기 때문에, 얇은 금속 두께로 평판형 안테나를 구현하였다. 정류 안테나는 입력 RF전력을 출력 DC전압으로 전환하는 정류회로는 2개의 쇼트기 다이오드를 이용한 배전압회로를 이용하였으며, 선형 테이퍼드 슬롯 안테나에 집적하여 정류 안테나를 설계하였다. 배전압 정류회로와 선형 테이퍼드 슬롯 안테나의 임피던스 공액정합을 위하여, 테이퍼드 슬롯의 각도와 안테나 급전선의 길이의 조절을 통해 source-pull 방법을 이용하였다. 제안한 안테나 시제품은 자유공간 무선환경실험 환경에서 RF-DC전환 실험과 원거리장 안테나 방사패턴 측정실험을 통해 회로 및 방사 특성을 검증하였다. 최종 제안한 안테나는 중심주파수 915 MHz 기준으로 0.23-파장(75 mm)와 0.18-파장(60 mm) 크기로 소형화하였다.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1417-1427
• /
• 2019

In this study, we evaluated the performance of a commercial pixelated cadmium zinc telluride (CZT) detector for spectroscopy and identified its feasibility as a Compton camera for radiation monitoring in a nuclear power plant. The detection system consisted of a $20mm{\times}20mm{\times}5mm$ CZT crystal with $8{\times}8$ pixelated anodes and a common cathode, in addition to an application specific integrated circuit. The performance of the various radioisotopes $^{57}Co$, $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ was evaluated. In general, the amplitude of the induced signal in a CZT crystal depends on the interaction position and material non-uniformity. To minimize this dependency, a drift time correction was applied. The depth of each interaction was calculated by the drift time and the positional dependency of the signal amplitude was corrected based on the depth information. After the correction, the Compton regions of each spectrum were reduced, and energy resolutions of 122 keV, 356 keV, 511 keV, and 662 keV peaks were improved from 13.59%, 9.56%, 6.08%, and 5%-4.61%, 2.94%, 2.08%, and 2.2%, respectively. For the Compton imaging, simulations and experiments using one $^{137}Cs$ source with various angular positions and two $^{137}Cs$ sources were performed. Individual and multiple sources of $^{133}Ba$, $^{22}Na$, and $^{137}Cs$ were also measured. The images were successfully reconstructed by weighted list-mode maximum likelihood expectation maximization method. The angular resolutions and intrinsic efficiency of the $^{137}Cs$ experiments were approximately $7^{\circ}-9^{\circ}$ and $5{\times}10^{-4}-7{\times}10^{-4}$, respectively. The distortions of the source distribution were proportional to the offset angle.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1557-1564
• /
• 2020

In this paper, 3D model-based interactive gamma ray shielding package (MIGSHIELD) is developed in virtual reality platform for windows operating system. In MIGSHIELD, the computational methodology is based on point kernel algorithm (PK), several key parameters of PK are obtained using new technique and new methods. MIGSHIELD has interactive capability with virtual world. The main features made in the MIGSHIELD are (i) handling of physical information from virtual world, (ii) handling of arbitrary shapes radioactive source, (iii) calculating the mean free path of gamma ray, (iv) providing interactive function between PK and virtual world, (v) making better use of PK for virtual simulation, (vi) plug and play. The developed package will be of immense use for calculations involving radiation dose assessment in nuclear safety and contributing to fast radiation simulation for virtual nuclear facilities.

• 천문학회지
• /
• 제38권4호
• /
• pp.445-462
• /
• 2005

In a companion paper, we have presented so-called Spatio-Spectral Maximum Entropy Method (SSMEM) particularly designed for Fourier-Transform imaging over a wide spectral range. The SSMEM allows simultaneous acquisition of both spectral and spatial information and we consider it most suitable for imaging spectroscopy of solar microwave emission. In this paper, we run the SSMEM for a realistic model of solar microwave radiation and a model array resembling the Owens Valley Solar Array in order to identify and resolve possible issues in the application of the SSMEM to solar microwave imaging spectroscopy. We mainly concern ourselves with issues as to how the frequency dependent noise in the data and frequency-dependent variations of source size and background flux will affect the result of imaging spectroscopy under the SSMEM. We also test the capability of the SSMEM against other conventional techniques, CLEAN and MEM.

• 전자공학회논문지 IE
• /
• 제44권1호
• /
• pp.1-5
• /
• 2007

본 논문에서는 FFL에 대한 기초 방전특성의 일부분으로 인가전압을 정현파와 구형파로 변화시켜 V-Q Lissjous 도형을 이용하여 FFL의 방전형태를 분석하고, 인가전압의 듀티비(duty ratio)의 면화에 의한 radiation transition에 대하여 고찰하였다. FFL을 정현파와 펄스파을 이용하였고, 절연층으로 둘러 쌓여 있는 전극을 갖는 FFL의 방전 특성을 V-Q 리사쥬 도형을 이용하여 방전 특성을 고찰하였다. FFL은 펄스파로 구동하였을 때 방전 전류는 전압의 상승 순간에 방전 전류가 흐른다. 듀티비가 증가하면 준안정 준위의 Xe 원자들은 증가하며 172nm의 자외선 방사량이 증가하고 있음을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.221-223
• /
• 2008

This paper presents a maximum power point tracking(MPPT) of Photovoltaic system with chopping ratio of DC-DC converter considered load. A variation of solar irradiation is most important factor in the MPPT of PV system. That is nonlinear, aperiodic and complicated. The paper consists of solar radiation source, DC-DC converter, DC motor and load(cf, pump). NN algorithm apply to DC-DC converter through an adaptive control of neural network, calculates converter-chopping ratio using an adaptive control of NN. The results of an adaptive control of NN compared with the results of converter-chopping ratio which are calculated mathematical modeling and evaluate the proposed algorithm. The experimental data show that an adequacy of the algorithm was established through the compared data.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3795-3802
• /
• 2022

NaI(Tl) scintillation materials are considered to be one of many materials that are used exclusively for γ-ray detection and spectroscopy. The gamma-ray spectrometer is not an easy-to-use device, and the accuracy of the numerical values must be carefully checked based on the rules of the calibration technique. Therefore, accurate information about the detection system and its effectiveness is of greater importance. The purpose of this study is to estimate, using an analytical-numerical formula (ANF), the purely geometric solid angle, geometric efficiency, and total efficiency of a cylindrical NaI(Tl) γ-ray detector with a side-through hole. This type of detector is ideal for scanning fuel rods and pipelines, as well as for performing radio-immunoassays. The study included the calculation of the complex solid angle, in combination with the use of various points like gamma sources, located axially and non-axially inside the through detector side hole, which can be applied in a hypothetical method for calibrating the facility. An extended γ-ray energy range, the detector, source dimensions, "source-to-detector" geometry inside the side-through hole, path lengths of γ-quanta photons crossing the facility, besides the photon average path length inside the detector medium itself, were studied and considered. This study is very important for an expanded future article where the radioactive point source can be replaced by a volume source located inside the side-trough hole of the detector, or by a radioactive pipeline passing through the well. The results provide a good and useful approach to a new generation of detectors that can be used for low-level radiation that needs to be measured efficiently.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4808-4824
• /
• 2016

Signal individual reconnaissance and identification is an extremely important research topic in non-cooperative domains such as electronic countermeasures and intelligence reconnaissance. Facing the characteristics of the complexity and changeability of current communication environment, how to realize radiation source signal individual identification under the low SNR conditions is an emphasis of research. A novel emitter individual identification method combined bi-spectrum analysis with wavelet feature is presented in this paper. It makes a feature fusion of bi-spectrum slice characteristics and energy variance characteristics of the secondary wavelet transform coefficient to identify MFSK signals under the low SNR (signal-to-noise ratios) environment. Theoretical analyses and computer simulation results show that the proposed algorithm has good recognition performance with the ability to suppress noise and interference, and reaches the recognition rate of more than 90% when the SNR is -6dB.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.59-62
• /
• 2008

The peptide methionine sulfoxide reductases (Msrs) are enzymes that catalyze the reduction of methionine sulfoxide back to methionine. Because of two enantiomers of methionine sulfoxide (S and R forms), this reduction reaction is carried out by two structurally unrelated classes of enzymes, MsrA (E.C. 1.8.4.11) and MsrB (E.C. 1.8.4.12). Whereas MsrA has been well characterized structurally and functionally, little information on MsrB is available. The recombinant MsrB from Bacillus subtilis has been purified and crystallized by the hanging-drop vapor-diffusion method, and the functional and structural features of MsrB have been elucidated. The crystals belong to the trigonal space group P3, with unit-cell parameters a=b=136.096, $c=61.918{\AA}$, and diffracted to $2.5{\AA}$ resolution using a synchrotron-radiation source at Pohang Light Source. The asymmetric unit contains six subunits of MsrB with a crystal volume per protein mass $(V_M)\;of\;3.37{\AA}^3\;Da^{-1}$ and a solvent content of 63.5%.