• 제목/요약/키워드: Radiation Monitoring

검색결과 531건 처리시간 0.025초

동-서 가로에서 차양이 보행자의 열적 쾌적성에 미치는 영향 (The Effect of Shading on Pedestrians' Thermal Comfort in the E-W Street)

  • 류남형;이춘석
    • 한국조경학회지
    • /
    • 제46권6호
    • /
    • pp.60-74
    • /
    • 2018
  • 본 연구는 폭염 시 동-서향 가로의 북측 보도($N35^{\circ}10.73{\sim}10.75^{\prime}$, $E128^{\circ}55.90-58.00^{\prime}$, 표고: 50m)에서 기상측정장비, 순복사계, 반사구와 열화상카메라를 이용한 실측을 통해 가로수와 쉘터에 의한 차양이 인체가 체감하는 열환경에 주는 영향을 MRT, L-MRT, UTCI, 바닥면, 벽면, 천개면의 구성요소별 방사온도로 평가하였다. 이를 위해 1 및 2열 가로수와 생울타리, 쉘터와 어-닝, 햇빛 노출지에 대한 열환경을 측정하였다. 9일간 오전 10시부터 오후 4시까지의 선 자세의 인체가 흡수한 매 1분 간격 인체-생기상학적 자료 그리고 1일간 오후 1시 16분부터 35분까지 보도 구성요소의 방사온도를 분석한 결과는 다음과 같다. 가로수와 쉘터에 의한 차양은 여름철 낮 동안 UTCI를 감소시킴으로써 열스트레스를 완화하였는데, 햇빛 노출지에 비해 1 가로수와 생울타리는 0.4단계~0.5단계, 2열 가로수와 생울타리는 0.5단계~0.8단계, 쉘터와 어-닝은 0.3단계~1.0단계로 낮추어 주었다. 하지만 폭염 시에는 가로수와 쉘터 하부의 열환경도 이용자들에게 대부분의 시간대에 "매우 강한 열스트레스"를 주는 것으로 나타났다. 그리고 햇빛에 노출된 보도 상의 열환경은 "매우 강한 열스트레스" 또는 "극심한 열스트레스"를 주는 것으로 나타났다. 체온 $37^{\circ}C$를 기준으로 한 보도 구성요소의 열스트레스 부하온도는 포장면 $7.4^{\circ}C{\sim}21.4^{\circ}C$, 도로면 $14.7^{\circ}C{\sim}15.8^{\circ}C$, 쉘터의 캐노피 $12.7^{\circ}C$, 어-닝 $8.6^{\circ}C$, 가로시설물 $7.0^{\circ}C$, 건물벽면 $3.5^{\circ}C{\sim}6.4^{\circ}C$ 순으로 나타났다. 열스트레스 부하율은 포장면 34.9%~81.0%, 도로면 9.6%~25.2%, 쉘터의 캐노피 24.8%, 건물벽면 14.1%~15.4%, 어-닝 7.0%, 가로시설물 5.7% 순으로 나타났다. 보도에서 보행자의 열적 쾌적성을 개선하기 위해서는 차양을 통해 포장면 및 도로면 그리고 건물벽면의 방사온도를 낮추는 것이 가장 효율적이며, 이를 위해서는 최소한의 정지와 전정을 통해 가로수의 수관투영면적과 LAI를 높여야 하며, 도로변에 지엽이 치밀한 생울타리를 조성하는 것은 필수적이다. 그리고 쉘터나 어-닝의 표면온도를 낮추기 위해서 서멀 라이너, 고반사 재료, 식생 녹화 등의 대책을 강구할 필요가 있다. 아울러 건물벽면에 재귀반사 재료를 사용함으로써 반사광을 제어하여야 하며, 적극적으로는 보도 포장 표면온도를 낮추기 위해 보도 포장면에 물을 뿌리는 것이 효율적이다.

판형 웨이브가이드 초음파 센서를 이용한 소듐냉각고속로 원격주사 검사기법 개발 (Development of a Ranging Inspection Technique in a Sodium-cooled Fast Reactor Using a Plate-type Ultrasonic Waveguide Sensor)

  • 김회웅;김상활;한재원;주영상;박창규;김종범
    • 한국소음진동공학회논문집
    • /
    • 제25권1호
    • /
    • pp.48-57
    • /
    • 2015
  • 제 4세대 원자로로 개발되고 있는 소듐냉각고속로는 냉각재로 사용되는 소듐의 물과 공기에 의한 반응을 방지하기 위하여 원자로 헤드의 개방 없이 회전 구동만을 이용하여 핵연료 교환을 수행한다. 따라서 핵연료 교환을 위해서는 노심과 상부내부구조물 사이의 공간에 원자로 헤드의 회전 구동을 방해하는 장애물의 존재 여부를 확인하는 검사가 반드시 선행되어야 하는데, 소듐의 불투명성으로 인해 통상적인 광학 장비를 사용한 검사방법으로는 장애물의 확인이 어렵고, 초음파를 이용한 검사방법이 적용되어야 한다. 이 연구에서는 불투명한 소듐 중에서 노심과 상부내부구조물 사이의 장애물 존재 여부를 확인하기 위하여 판형 웨이브가이드 초음파 센서를 적용한 원격주사 검사기법을 개발하였다. 웨이브가이드 센서는 원자로헤드 상부의 저온 구간에 초음파 트랜스듀서를 설치하고 길이가 긴 웨이브가이드를 사용하여 노심 상부의 고온 고방사능 소듐 내부로 초음파를 전파시키기 때문에, 고온 고방사능에 의한 손상 없이 장시간 적용이 가능한 장점을 가지고 있다. 먼저, 수평 방향으로 초음파를 방사시킬 수 있는 10 m 길이의 수평 빔 웨이브가이드 센서를 설계 제작하였고, 제작된 센서의 특성 분석을 위한 빔 프로파일 측정 및 기초 실험을 수행하여 방사되는 초음파의 빔 폭과 전파 거리를 평가하였다. 또한, 실제 장애물로 작용할 수 있는 부품들의 형상인 원형 목표물에 대한 원격탐지 성능시험을 수행하여 개발된 원격주사 기술의 유용성을 평가하였다.

이중경화법을 이용한 열개시제 및 광개시제가 배합된 황칠도료의 경화속도 촉진 및 물성향상 연구 (Improving Curing Rate and Physical Properties of Korean Dendropanax Lacquer with Thermal and Photo Initiator by Dual Curing)

  • 황현득;문제익;박초희;김현중;황백
    • Journal of the Korean Wood Science and Technology
    • /
    • 제38권4호
    • /
    • pp.333-340
    • /
    • 2010
  • 한반도 남부 일대에서 자생하는 황칠나무(Dendropanax morbifera Lev.) 수액으로부터 추출한 천연 도료인 황칠도료(Korean Dendropanax lacquer)는 예로부터 귀중한 예술품이나 투구, 화살, 활 등의 전쟁도구를 찬란한 황금색으로 도장하는데 사용되어 왔다. 경화 후 황금색의 투명한 도막을 형성하여 우수한 색상특성을 지니고 있을 뿐만 아니라 내후성, 내수성, 내식성 등이 우수하여, 보호도장으로써도 훌륭한 가치를 지니고 있다. 그러나 이러한 많은 장점에도 불구하고, 현대적인 여러 적용분야에 사용되지 못하고 있는 이유는 황칠도료의 생산량이 적고, 이로 인하여 가격이 매우 고가이고, 장시간의 경화시간이 소요되는 문제도 큰 원인으로 작용하고 있다. 한편 황칠 내에 광중합이 가능한 conjugated diene을 포함한 모노머가 있으며, 이러한 모노머는 일광 조사 조건등에 의하여 짧은 시간에 단단하고 황금색을 띠는 도막을 형성할 수 있음이 보고된 바가 있다. 따라서 본 연구에 서는 전통적인 황칠도료의 경화방법을 개선하고 경화속도를 촉진하기 위하여, 열개시제를 도입하여 열경화를 촉진하는 방법과 열개시제 및 광개시제를 동시에 도입하고 이중경화(dual curing)에 의해서 경화속도를 촉진하고자 하였다. 이러한 경화 속도 및 경화 거동은 적외선분광분석기(FT-IR)을 이용하여 -C=C- 이중결합 특성피크의 변화를 관찰하거나, 진자경도계(pendulum hardness tester)를 이용하여 표면 경도의 변화를 관찰함으로써 평가하였다. 또한 강체진자물성측정기(RPT)에 spot UV curing 장비를 도입하여 이중경화에 의한 경화 속도 진을 평가하였다. 본 연구의 결과 열개시제에 의하여 열경화가 촉진될 수 있을 뿐만 아니라, 이중경화에 의하여 경화속도를 향상시킬 수 있음을 확인하였다. 또한 이러한 황칠도료 경화 속도 촉진 방법을 활용하여 전통적인 역에만 사용되어온 황칠도료를 현대적인 여러 적용분야에도 확대하여 사용할 수 있는 가능성을 제시하였다.

고온처리 및 방사선 조사가 미강 지방질의 가수분해 및 산화에 미치는 영향 (Effects of Heat Treatment and Irradiation on Lipid Hydrolysis and Oxidation of Rice Bran)

  • 황금택;정순택
    • 한국식품과학회지
    • /
    • 제28권5호
    • /
    • pp.928-934
    • /
    • 1996
  • 미강을 아무런 처리를 하지 않거나, 고온처리 또는 방사선 조사하여 저장하면서 수분 및 유리지방산 함량, peroxide value (POV)등의 변화를 측정하여 미강 지방의 안정성을 검토하였다. 무처리 미강을 $-15^{\circ}C,\;4^{\circ}C,\;37^{\circ}C$및 실온$(15-30^{\circ}C)$에 저장하였을 때, 수분은 초기에 약 14%이었으며 저장온도가 높을수록 수분 손실이 많았고, $37^{\circ}C$에서 80일 저장시 수분이 9%로 되었다. 유리지방산은 초기에 약 2.5%이었으며 저장중 $-15^{\circ}C$에서는 거의 일정하였으나 그외의 온도에서는 온도가 높을수록 현저히 증가하여 $37^{\circ}C$에 80일 저장하였을 때 약 9배 정도 증가하였다. POV는 $37^{\circ}C$ 이외의 온도에서 약 80일 저장한 미강의 경우에 초기보다 약 2배 증가하였는데 $37^{\circ}C$에 저장한 미강의 경우에는 5배 정도의 증가를 보였다. 미강을 $70^{\circ}C,\;90^{\circ}C,\;105^{\circ}C$에서 열처리하여 $37^{\circ}C$에서 2주간 저장하였을 때 수분은 열처리 온도가 높고 시간이 길수록 저장 후에 수분함량이 낮아졌다. 미강을 $90^{\circ}C$에서 2시간 또는 $105^{\circ}C$에서 1시간 이강 열처리했을 때 유리지방산의 생성이 저지되었으며, 미강 지방의 POV는 열처리에 의해서 특이한 변화가 없었다. 미강을 1-30 kGy의 방사선 조사를 하여 $5^{\circ}C$$30^{\circ}C$에 4주간 저장하였을 때 수분은 방사선 조사에 의한 차이가 없었다. 유리지방산은 10 kGy까지 큰 차이가 없었으나 30 kGy 처리한 미강은 처리하지 않은 것보다 약 1.5배 정도 증가하였으나 저장 중에는 큰 변화를 보이지 않았다. 방사선 조사 직후의 POV는 방사선 조사량이 높을수록 증가하여 30 kGy의 경우에 무처리보다 약 4배 정도 높았으나, 저장 중에는 방사선 조사한 미강의 경우에 POV가 현저히 감소하였다.

  • PDF

촬영 빈도수 및 소독 주기에 따른 영상의학과 감염 관리 (Radiology Department Infection Control According to Radiography Frequency and Disinfection Period)

  • 이재승;정규환;김경희;임인철;권대철;구은회;동경래;정운관
    • 한국방사선학회논문지
    • /
    • 제5권2호
    • /
    • pp.73-80
    • /
    • 2011
  • 경상북도 포항지역의 300병상 규모의 병원에서 영상의학과의 감염관리에 대한 인지도 및 수행도를 설문 조사하고 촬영 장비 및 보조기구 등의 오염도를 측정하여 병원감염의 예방과 간리를 활성화하기 위한 방안을 마련하고자 하였다. 설문조사는 응답자의 인적사항, 감염관리 예방교육, 감염관리지침에 따른 영역별 질의로 구성되어 있으며 오염도 측정은 ATP 공중위생 모니터링 시스템을 이용하여 영상의학과 쵤영 장비 및 보조기구들에 대하여 7개 항목을 측정하였다. 자료의 분석은 SPSS version 12.0에서 paired T-test, Pearson의 상관분석을 이용하였으며 유의확률은 0.05이하(p<0.05)로 검정하였다. 설문조사 결과 감염관리위원회의 설치 및 담당부서, 감염관리 지침서를 구비하고 있었으나 감염관리 예방교육에 대한 전체 인지도는 평균 $3.73{\pm}0.64$, 수행도는 $3.39{\pm}0.83$으로 비교적 낮게 조사되었으며 유의한 차이를 보였다(p = 0.01). 또한 오염도 측정 결과 환자의 접촉이 많은 기구에서 Pearson 상관계수가 0.5보다 크게 나타나 병원균이 집중되어 있음을 알 수 있었으며 촬영 빈도수는 유의한 차이를 보이지 않았으나(p > 0.05) 소독주기는 유의한 차이를 보였다(p < 0.05). 따라서 환자의 접촉이 많은 종합병원의 경우 실시간 모니터링이 가능한 분석기를 비치하고 보건복지부가 고시한 소독액을 이용한 1분 이상 2회의 주기적인 소독 관리가 필요할 것으로 사료된다.

핵테러리즘과 세계핵테러방지구상(GICNT): 위협, 대응 및 한국에 대한 함의 (Nuclear Terrorism and Global Initiative to Combat Nuclear Terrorism(GICNT): Threats, Responses and Implications for Korea)

  • 윤태영
    • 시큐리티연구
    • /
    • 제26호
    • /
    • pp.29-58
    • /
    • 2011
  • 2001년 9/11 테러 이후 국제사회에 최대 위협중의 하나인 테러리즘과 핵무기 및 핵물질의 결합 위험성에 대한 경고가 계속되고 있다. 이 연구의 목적은 9/11 테러 이후 증대하는 핵테러리즘 위협에 대한 국제 다자적 대응체제인 세계핵테러방지구상(GICNT)의 목적, 원칙, 특성, 활동, 발전 저해요인 및 발전방향 등을 살펴보고 한국 정책에 대한 함의를 도출하는데 있다. 국제적 핵테러리즘 대응을 위해 GICNT는 포괄적 전략으로 (1) 전 세계 핵시설의 방호, (2) 초국가적 비국가 테러네트워크의 핵테러 책동 대처, (3) 핵보유국의 핵무기와 핵물질의 테러집단에 이전 예방과 억제, (4) 핵밀수 차단 등을 추구해야 할 것이다. 또한 GICNT 활동의 실효적인 국제협력 증진을 위해 시급히 시행해야할 조치들로는 (1) 공동위협 브리핑을 통한 핵테러리즘 위협에 대한 실제적인 가능성 분석 평가, (2) 핵테러리즘 훈련 실시, (3) 신속한 핵안보 체제 평가 실시, (4) 내 외부 위협에 대한 실제적인 핵안보 능력 시험, (5) 핵테러리즘 관련 위협과 사건에 대한 데이터베이스 구축과 공유 등이 있다. 한국의 입장에서 북한 핵관련 무기, 물질 및 기술의 테러집단에 이전되는 문제와 국제테러단체 또는 북한의 한국 핵시설 공격 및 핵장치를 이용한 테러행위 등이 주요 우려사항이다. 이러한 상황에서 한국은 세계 5위의 원자력 발전국으로서 GICNT와 핵테러 관련 국제 협약에 근거해 물리적 방호체제 구축과 핵테러리즘 대응태세를 강화하고 있다. 향후 핵테러리즘을 포괄적이고 효과적으로 예방하기위해서는 공항 항만, 주요교통 요충지점 및 국가 핵심기반시설 등에 핵물질 탐지 검색시스템과 이동형 탐지장비를 강화해야할 것이다. 아울러 대응체계를 강화하기위해 실효적인 위기관리 매뉴얼의 작성과 주요 핵테러 유형에 대한 대테러 훈련과 작전태세를 강화해야할 것이다. 재앙적인 결과를 초래하는 핵테러리즘에 대한 예방 탐지 대응을 위해서는 국내적 관련 법 제도 체제 정비뿐만 아니라 국제협력 강화는 무엇보다 중요하다.

  • PDF

유방촬영검사에서 선량지표분석에 대한 모니터링 (Monitoring on Dose Index Analyzed in the Mammography)

  • 조지환;이효영;임인철
    • 한국방사선학회논문지
    • /
    • 제10권7호
    • /
    • pp.477-482
    • /
    • 2016
  • 유방촬영검사(Mammography)에서 선량지표를 분석하여 한국식품의약품안전처(Korea Food & Drug Administ ration)에서 제시하는 가이드라인과 비교분석하여 의료방사선의 관리가 잘 이루어지고 있는지 파악하고자 하였다. 방법으로는 유방촬영검사를 시행한 후 의료영상저장정보시스템(Picture Archiving Communication System, PACS)으로 전송되어진 선량 보고서(dose report)와 의료전자차트(Electronic Medical Record, EMR)를 참고하여 양쪽 유방 상하방향촬영(cranio-caudal, CC), 내외 사방향 촬영(medio-lateral oblique, MLO)검사에서 관전압(kVp), 조사시간(exposure time), 관전류량(mAs), 유방압박두께(compressed breast thickness), 평균유선선량(average glandular dose), 체질량지수(Body Mass Index, BMI)를 분류하여 분석하였다. 결과적으로 연령별에 따른 검사부위 CC, MLO에서 유방압박두께는 50-59세에서 45.6 mm, 49.6 mm로 가장 두껍게 나타났으며 전체적인 평균유방압박두께는 CC에서 44.2 mm, MLO 48.9 mm로 MLO가 4.7 mm 더 두껍게 나타났다. 평균유선선량은 CC에서 1.05 mGy, MLO에서 1.14 mGy로 CC보다 MLO에서 0.09 mGy가 더 높게 나타났으며 유방압박두께가 10 mm 증가할수록 CC와 MLO에서는 0.15 mGy, 0.17 mGy가 증가하는 것으로 나타났다. 한국식품의약품안전처에서 제시하는 유방 CC에서 1매 촬영 시 환자가 받는 평균유선선량 1.16 mGy 평가와 비교했을 시 1.05 mGy로 나타났으나 60 mm이상에서는 1.30 mGy로 초과하는 것으로 나타났다. 또한 유방압박두께가 높을수록 체질량지수가 높게 나타났으며 체질량지수에 따른 비만기준 25이상인 경우는 유방압박두께가 50 mm 이상일 경우에 비만인 것으로 나타났다.

소동물 폐종양의 정량적 개선을 위한 내부 움직임 평가 (Estimation of Internal Motion for Quantitative Improvement of Lung Tumor in Small Animal)

  • 유정우;우상근;이용진;김경민;김진수;이교철;박상준;유란지;강주현;지영훈;정용현;김병일;임상무
    • 한국의학물리학회지:의학물리
    • /
    • 제22권3호
    • /
    • pp.140-147
    • /
    • 2011
  • 이 연구에서는 폐종양의 정량적 개선을 위하여 분자체를 이용하여 내부 움직임을 측정하고 평가된 데이터를 기반으로 소동물 PET 영상내의 폐종양을 국소화하고자 하였다. 소동물 폐 영역의 내부 움직임은 방사성물질을 흡착한 분자체를 이용하여 소동물 폐 영역에 부착함으로써 구현하였다. 폐 영역의 내부 움직임 표적으로 사용된 분자체는 약 37 kBq의 Cu-64를 흡착시켜 폐종양을 모사하였다. 소동물 PET 영상은 Siemens Inveon 스캐너를 이용하여 획득하였으며 외부 움직임 데이터는 트리거 생성 장치인 BioVet을 이용하였다. SD-Rat PET 영상은 $^{18}F$-FDG 37 MBq/0.2 mL을 미정맥으로 주사하고 60분 후 20분간 데이터를 획득하였다. 리스트모드 데이터의 각 선응답은 외부 트리거 장치에 의해 획득된 트리거신호를 이용하여 2 bin에서 16 bin으로 사이노그램을 획득하였다. 획득된 사이노그램 데이터는 OSEM 2D 알고리즘을 이용하여 4회의 반복으로 재구성하였다. 종양의 정량적 분석을 위한 PET 영상은 종양을 묘사한 분자체 영역에 관심영역을 설정하고 계수와 SNR 그리고 FWHM을 이용하여 평가하였다. 움직임 표적으로 사용된 분자체의 크기는 $1.59{\times}2.50mm$이었으며, 기준 영상으로 획득한 체외 분자체 수직 및 수평 FWHM은 $2.91{\times}1.43mm$이었다. 정적영상과 4 bin 그리고 8 bin 영상에서의 수직 FWHM은 각각 3.90 mm, 3.74 mm, 3.16 mm이었으며 수평 FWHM은 각각 2.21 mm, 2.06 mm, 1.60 mm이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 계수 값은 각각 4.10, 4.83, 5.59, 5.38, 5.31이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 SNR은 4.18, 4.05, 4.22, 3.89, 3.58이었다. FWHM은 게이트 수의 증가에 따라 계속 향상됨을 확인하였다. 그러나 계수 값과 SNR은 게이트 수의 증가에 따라 계속 향상되지 않고 특정 bin 수에서 가장 높은 값을 보여 소동물 폐 영역에서의 종양 영상화시 SNR의 손실을 최소화하면서 향상된 계수 값을 얻을 수 있는 게이트 수를 획득하였다. 내부 움직임 측정은 최적화된 종양 국소화 영상을 획득할 수 있으며 외부 움직임 모니터링 시스템을 사용하지 않고 장기별 움직임 예측 모델링을 위한 유용한 방법이 될 것으로 기대된다.

그늘시렁 Wisteria floribunda의 엽면적지수가 온열환경에 미치는 영향 (The Effects of Pergola Wisteria floribunda's LAI on Thermal Environment)

  • 류남형;이춘석
    • 한국조경학회지
    • /
    • 제45권6호
    • /
    • pp.115-125
    • /
    • 2017
  • 본 연구는 등(Wisteria floribunda(Willd.) DC.)으로 피복된 그늘시렁($L\;7,200{\times}W\;4,200{\times}H\;2,700mn$)의 엽면적지수(LAI)의 변동에 따른 온열환경을 규명하고자 한 것이다. 이를 위해 진주시내 광장($N35^{\circ}10^{\prime}59.8^{{\prime}{\prime}}$, $E128^{\circ}05^{\prime}32.0^{{\prime}{\prime}}$, 표고: 38m)의 등으로 피복된 그늘시렁 하부와 햇빛에 노출된 포장지를 대상으로 맑은 날 미기상을 측정하였다. 범용온열기후지수(UTCI)를 산정하기 위해 봄철과 여름철의 미기상환경으로서 지상 60cm 높이에서 기온, 풍속, 상대습도 그리고 6방향의 장파 및 단파복사를 2017년 4월 9일부터 8월 27일까지 측정하였다. 또한, LAI는 LAI-2200C 수관분석기로 측정하였다. 18일간 오전 10시부터 오후 4시까지의 앉은 자세의 인체가 흡수한 매 1분 간격 인체-생기상학적 자료를 분석한 결과는 다음과 같다. 측정기간 동안 햇빛노출지에 비해 그늘시렁 하부의 일평균 기온은 $0.7{\sim}2.3^{\circ}C$ 낮았으며, 일평균 풍속과 일평균 상대습도는 각각 0.17~0.38m/s와 0.4~3.1% 높았다. LAI와 쥴리안 데이 사이의 회귀식은 $y=-0.0004x^2+0.1719x-11.765(R^2=0.9897)$였다. 그늘시렁 하부의 일평균 평균복사온도($T_{mrt}$) 값은 햇빛 노출지에 비해 각각 $11.9{\sim}25.5^{\circ}C$로 낮았으며, 최대 평균복사온도 감소(${\Delta}T_{mrt}$)는 $24.1{\sim}30.2^{\circ}C$였다. LAI의 변동에 따른 햇빛 노출지 대비 일평균 $T_{mrt}$ 감소율(%) 사이의 회귀식은 $y=0.0678{\ln}(x)+0.3036(R^2=0.9454)$였다. 그늘시렁 하부의 일평균 UTCI 값은 햇빛 노출지에 비해 각각 $4.1{\sim}8.3^{\circ}C$로 낮았으며, 최대 범용온열기후지수 감소 값(${\Delta}UTCI$)는 $7.8{\sim}10.2^{\circ}C$였다. LAI의 변동에 따른 햇빛 노출지 대비 일평균 UTCI 감소율(%) 사이의 회귀식은 $y=0.0322{\ln}(x)+0.1538(R^2=0.8946)$였다. 종합적으로 보면 여름철에 덩굴식물로 피복된 그늘시렁에 의한 녹음은 차양에 의한 $T_{mrt}$의 감소를 통해 낮 동안 UTCI를 감소시킴으로써 열스트레스를 매우 강한(UTCI>$38^{\circ}C$) 또는 강한(UTCI >$32^{\circ}C$) 단계에서 강한(UTCI >$32^{\circ}C$) 또는 보통(UTCI >$26^{\circ}C$) 단계로 낮추어 준다. 따라서 여름철 열스트레스를 완화하고 쾌적한 인체 온열쾌적성을 제공하기 위해서는 덩굴식물로 피복된 그늘시렁의 도입은 필수적이다. 하지만 폭염 시에는 덩굴식물로 피복된 그늘시렁 하부의 온열환경도 이용자들에게 매우 강한 열 스트레스(UTCI >$38^{\circ}C$)를 주므로 노약자의 옥외활동은 자제시킬 필요가 있다고 판단된다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF