• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.972-981
• /
• 2008

The blower which is installed in a FCEV(fuel cell electric vehicle) may cause noise due to misalignment and unbalance of mechanical components that rotate at high speed. One of the key points in efforts to minimize the noise radiation from a blower is the knowledge of the main radiating component and the relation between the surface vibration of a blower and the sound pressure. In this research, the blower model is developed based on FEM(finite element method). FE(finite element) model is reliable by correlation of frequencies and MAC(modal assurance criterion) values between EMA(experimental modal analysis) and FEA(finite element analysis). This model is applied to predict the vibration of a blower by using inverse force identification method and predict the radiating noise by using BEM(boundary element method). Comparing the frequencies of resonance and those mode shapes between EMA and FEA, a structural modification of the FE model is evaluated for reducing the parameters of the blower noise.

• 한국음향학회지
• /
• 제16권5호
• /
• pp.60-67
• /
• 1997

서기 771년(신라, 혜공왕 7년)에 주조된 성덕 대왕 신종은 지면으로부터 약 50cm 떨어지게 설치되어 있으며 지면에 울림통을 가지고 있다. 이 울림통은 일종의 공명기의 역할을 하여 종 내부와 함께 성덕 대왕 신종의 고유한 소리 특성에 영향을 줄 것이라 예측되어 왔다.[1, 2, 3]. 본 논문에서는 이를 규명하기 위한 내부 음장의 3차원 측정 실험을 소개하고 있으며 울림통이 종소리에 끼치는 영향을 단순하나 물리적 현상을 대표하는 모델을 이용하여 설명하고 있다. 이러한 해석 방법을 기초로 하여 새로운 울림통의 크기를 제안하고 있다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3286-3297
• /
• 2021

The released hydrogen can be ignited even with weak ignition sources. This emphasizes the importance of the hydrogen flammability evaluation to prevent catastrophic failure in hydrogen related facilities including a nuclear power plant. Historically numerous attempts have been made to determine the flammability limit of hydrogen mixtures including several diluents. However, no analytical model has been developed to accurately predict the limit concentration for mixtures containing radiating gases. In this study, the effect of H₂O and CO₂ on flammability limit was investigated through a numerical simulation of lean limit hydrogen flames. The previous flammability limit model was improved based on the mechanistic investigation, with which the amount of indirect radiation heat loss could be estimated by the optically thin approximation. As a result, the sharp increase in limit concentration by H₂O could be explained by high thermal diffusivity and radiation rate. Despite the high radiation rate, however, CO₂ with the lower thermal diffusivity than the threshold cannot produce a noticeable increase in heat loss and ultimately limit concentration. We concluded that the proposed mechanistic analysis successfully explained the experimental results even including radiating gases. The accuracy of the improved model was verified through several flammability experiments for H₂-air-diluent.

• 물과 미래
• /
• 제22권4호
• /
• pp.411-412
• /
• 1989

• The Journal of Korean Physical Therapy
• /
• 제13권2호
• /
• pp.257-264
• /
• 2001

To take the Far-infrared(FIR) ray which is a optimized wavewlength and strength, at first, it is to be induced the characteristic algorithm and the computerized programing of FlR radiating materials. In this study, we induced that the formular of optimized FIR with physical, mathematical logic and theory, especially, Plank, Kirchhoff, Wien, Stefan-Boltzmann's logic and law. In the long run the formular was induced with mathematical integration. since we had to know the molecular wavelength. Base on the induced formular as above, we programmed the optimized FlR radiating computerized program, it would be useful to design semiconductor( VLSI) as the FlR instrument center control system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.61-64
• /
• 2006

This paper presents experimental analysis of a friction-driven wheel responsible for generating wheel squeal. Squeal noise generating mechanism has been examined under the laboratory condition by the model rig. Creep characteristics and squeal noise were observed by varying relative velocity of the wheel with respect to the rail and friction coefficient. Computational radiating noise analysis was also performed based on the modal analysis and noise transfer function measurement of the object wheel.

• Journal of Korean Neurosurgical Society
• /
• 제58권1호
• /
• pp.89-92
• /
• 2015

Rheumatoid arthritis (RA) is a chronic inflammatory disease involving multiple joints. The cervical spine is often affected, and cases involving atlantoaxial joint can lead to instability. Anterior atlantoaxial subluxation in RA patients can lead to posterior neck pain or occipital headache because of compression of the C2 ganglion or nerve. Here, we report the successful treatment of a RA patient with occipital radiating headache using pulsed radiofrequency therapy at the C2 dorsal root ganglion.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.789-793
• /
• 2003

This study focused on the optimization of the illumination method for efficient use of light energies in a photobioreactor. In order to investigate the effect of radiator position, a model simulation study was carried out using Synechococcus sp. PCC 6301 and an internally radiating photobioreactor as a model system. The efficiency of light transfer in a photobioreactor was analyzed by estimating the average light intensity in a photobioreactor. The simulation result, indicate that there exists an optimal position of internal radiators, and that the optimal position varies with radiator number and cell concentration. When light radiators are placed at the optimal position, the average light intensity is about 30% higher than that obtained by placing radiators at the circumstance or center of a photobioreactor. The method presented in this work may be useful for improving light transfer efficiency in a photobioreactor.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1148-1151
• /
• 2013

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency-domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non-cutting examination.

• 한국환경교육학회지:환경교육
• /
• 제19권2호
• /
• pp.122-132
• /
• 2006

This research compared the mechanism of the greenhouse effect in the atmosphere with retaining warmth in the actual greenhouse, analyzed the styles of explaining the greenhouse effect in current textbooks, and investigated teachers' and students' degrees of understanding the effect. The mechanisms of the actual greenhouse and the greenhouse effect are not the same. Nevertheless, in all the current textbooks, the radiation phenomenon by the atmosphere is described as the 'greenhouse effect'. Using the words of the 'greenhouse effect' to refer to the effect of air being kept warm by the heat absorbing gases, causes confusion of concepts. To make learners understand the greenhouse effect exactly, concrete principles such as radiating electromagnetic phenomenon should be explained. However, teachers and current textbooks explained the radiating electromagnetic phenomenon as actual greenhouse. Therefore, it is difficult for learners to understand the greenhouse effect, scientifically. Because of this, learners maybe confused about greenhouse effect concepts.