• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.61-70
• /
• 1996

침엽수재(針葉樹材)(Radiata pine, Pinus radiata)MDF와 활엽수재(闊葉樹材)(Rubber wood, Hevea brasiliensis)MDF 각 1종을 대상으로 MDF를 제조하기 전 원료(原料) 섬유(纖維)의 미세(微細) 구조(構造) 및 내부결합력 시험 후 MDF의 파괴면(破壞面)에서 섬유표면(纖維表面)에 접착제(接着劑)가 도포(塗布)된 형태를 주사전자현미경(走査電子顯微鏡)으로 관찰하였다. 원료 섬유는 침(針) 활엽수재(闊葉樹材) 모두 fiber twisting 및 shrinkage fold 등이 관찰되었다. 침엽수재(針葉樹材)의 경우는 유연벽공부(有緣壁孔部)에서 유연벽공(有緣壁孔)이 없는 부분에 비하여 shrinkage fold의 발생 빈도가 낮고 표면(表面) 박리(剝離)는 가도관(假導管) 중 벽공이 없는 부분에서 관찰되었다. 활엽수재(闊葉樹材) 목섬유(木纖維)는 침엽수재(針葉樹材)와 마찬가지로 shrinkage fold가 관찰되었으나 표면(表面) 박리(剝離)는 거의 관찰되지 않았다. 활엽수(闊葉樹) 섬유(纖維)에서는 벽공의 유무에 따른 shrinkage fold의 차이(差異)가 거의 관찰되지 않았는데 이는 목섬유(木纖維)가 침엽수(針葉樹) 가도관(假導管)보다 작은 단벽공(單壁孔)을 갖기 때문으로 생각된다. 또 방사유세포(放射柔細胞)와 가도관(假導管) 및 목섬유(木纖維)의 박리(剝離) 부분(部分)에는 융기부(隆起部)가 관찰되었다. 내부결합력 시험후 나타난 파괴면을 통하여 접착제 분포를 관찰한 결과 거의 모든 섬유(纖維)들이 접착제(接着劑)로 둘러싸여 있었으며 섬유(纖維)간 접착형태(接着形態)도 매우 다양하였다. 침활엽수재(針闊葉樹材)간에 강도(强度)의 차이는 있었지만 파괴(破壞) 형태(形態)는 큰 차이를 나타내지 않았다. 즉 침활엽수(針闊葉樹) 모두 접착층(接着層)이 아닌 섬유(纖維)에서 파괴(破壞)가 발생하였으며 섬유에서 박리(剝離)된, 세포벽(細胞壁)의 일부가 다른 섬유(纖維)의 표면(表面)에 남아있는 형태와 섬유(纖維) 표면(表面)에서 떨어져 나간 형태로 관찰되었다. 세포 구성이 단순한 침엽수(針葉樹) MDF에 비하여 유세포(柔細胞)와 도관(導管) 및 목섬유(木纖維)의 파편들이 활엽수(闊葉樹) MDF에서는 다양(多樣)하게 분포하였다.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.4
• /
• pp.311-322
• /
• 2017

This study examined the traditional edible basis and ingredients of Song-gi used for Pyeon of Jong-ga ancestral ritual food. Through an investigation of references, a case study, and ingredient analysis for traditional edible basis of Song-gi, the nutritional value and availability as food material were reviewed. Among the 4 kinds of pine trees from 4,705 types of edible materials usable as food listed in the ${\ll}$Korea Food Standards Codex${\gg}$, 'Pinus radiata D. Don', in which the husk is acknowledged as an edible food, was applied in this study. This study processed the Song-gi following the method of jong-ga and divided into pine inner bark (PIB) and pine inner bark powder (PIBP) to analyze the general composition and dietary fiber. The main composition of PIB was carbohydrate, in which the content was 88.7% per 100 g. The content of dietary fiber was 73.7% per 100 g and the insoluble dietary fiber reached 92.3% in total dietary fiber. In conclusion, the edibility of Song-gi, which has a considerable amount of insoluble dietary fiber caused constipation because it absorbed the moisture in the intestine due to the lack of nutrients but may be developed as a functional food that helps the digestive activation of the intestine and improve the health of the intestine if taken with balanced nutrition.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.5
• /
• pp.548-557
• /
• 2017

This study investigated the effects of insoluble dietary fibers from pine (Pinus radiata D. Don) inner bark powder (PIBP) on loperamide constipation in rats. Male Sprague-Dawley rats were administered PIBP in their diets at concentrations of 5% and 10% for 4 weeks. Rats were divided in to four groups, normal diet group (Cont), a normal diet and loperamide group (Lop), 5% PIBP experimental diet and loperamide group (Lop+PIBP 5%), and 10% PIBP experimental diet and loperamide group (Lop+PIBP 10%). Constipation was induced by oral administration of loperamide (2 mg/kg, twice per day) for the last three days of the experiment. Food intake, body weight, properties of feces, gastrointestinal transit time, and serum lipid profiles were measured. When compared with the normal diet and loperamide group (Lop), there were increases in fecal pellet number (p<0.05), wet weight (p<0.001), and water content (p<0.001). Positive results were derived from relevant indicators to improve constipation. In addition, the number of fecal pellets in the colon was not significant, and decreased as PIBP content increased. PIBP had a concentration-dependent effect on reduction of total cholesterol, LDL-cholesterol, and triglycerides and elevation of HDL-cholesterol. These results indicate that PIBP may effectively prevent constipation.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.528-537
• /
• 2015

To reuse the waste bone from restaurants or butcher houses, the possibility of using waste bone powder after cooking as a filler for wood adhesives used in manufacturing plywood was investigated. Radiata pine (Pinus radiata D. Don) plywoods were manufactured by using commonly used wood adhesives such as urea-melamine formaldehyde (UMF) resin, urea-formaldehyde (UF) resin, and phenol-formaldehyde (PF) resin and the prepared fillers from cattle bone powder, pig bone powder, and seashell powder. Plywood fabricated by using cattle bone powder, pig bone powder, and seashell powder showed weaker performance in dry and wet glue-joint shear strength and wood failure than those of the plywood with wheat flour. The result showed that it was hard to use only bone powder for the replacement of wheat flour. However, the filler mixed with wheat flour and bone powders showed equivalent dry bonding strength and better water resistance than the wheat flour, indicating that bone powders mixed with wheat flour might be used for the manufacture of plywood. When bone powders were mixed with wheat flour as adhesive fillers the shell powder showed the lowest bonding properties and there was no big difference between the cattle bone powder and the pig bone powder.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.507-518
• /
• 1982

Biogeochemistry of a 34-year-old red pine plantation on a Typic Udipsamment was investigated in the central sand plains of Wisconsin Biomass and net primary production were $106Mg\;ha^{-1}$ and $11.0Mg\;ha^{-1}y^{-1}$ respectively. Concentrations of elements in the vegetation were greatest in the 2- to 3-year-old needles, followed by current needles, current twigs, bole bark, live branches, dead branches, bolewood production, and bolewood. For a given tree component (excluding the current twigs), elemental concentrations were greatest in the upper one- third and least in the lower one- third of the tree. Total elements in the vegetation are ranked: N($222kg\;ha^{-1}$), Ca(217), K (85), Mg(38), S(31), and p. The soil contained from 60 to 89% of the readily available P, K, Ca, Mg, and S in the ecosystem. Whereas precipitation was the major source of N and S, weathering supplied the bulk of the Ca, Mg, P, and K. Output of a given element by leaching was less than $7kg\;ha^{-1}y^{-1}$ except for S which was $12kg\;ha^{-1}y^{-1}$ Whereas throughfall returned the greatest amounts of N, K, and S to the forest floor, litterfall accounted for the greatest returns of Ca, Mg, and P. Because of foliar leaching, net loading of all elements studied in the throughfall exceeded that of the precipitation. Ammonium in net precipitation was reduced by a factor of three within the upper 7.5cm due to uptake by fine roots.