• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.383-388
• /
• 2005

To install a radar reflector on small ships, such as a small fishing vessel, a fishery buoy, and a barge ship for fishery, it is very important to develop the optimal system which may determine a proper installation location. For this, the response characteristics how waves have an effect on the small ships should be accurately analyzed. In this paper, we analyze the dynamic behaviors of small ships, which may be caused by irregular waves. To do this, we investigate how a barge ship responses to wavelength, water depth, and directions of incoming waves. The analyzed results shall be utilized to evaluate an effect on a radar cross section when we install an radar reflector on a barge ship for fishery and a small ship.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.350-357
• /
• 2022

With the recent prediction of 'Cycle 25', the importance of space weather research increases. Accordingly, the World Radiocommunication Conference (WRC)-23 has adopted Agenda Item 9.1a) and carried out sharing researches between active/passive space weather observation systems and existing services. Therefore, in this paper, in order to increase the precision of space weather environment data and secure the frequency spectrum for observation systems, the direct interference effect from the weather radar in Gosan, Jeju on the space weather observation receiver in Hallim, Jeju, and the indirect interference on the observation receiver by diffraction and scattering from the radar target have been analyzed. As a result, it can be known that the radar direction, the propagation direction diffracted and scattered from the target, and the Rradar Cross Section (RCS) of the radar target, the reception area of the space weather observation antenna, and the antenna off-boresight are important parameters for the interference effect analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.88-99
• /
• 2004

A development of a software on radar target signature analysis is presented in this paper The target signature includes Radar Cross Section(RCS) prediction, Range Profile(RP) processing and Inverse Synthetic Aperture Radar(ISAR) processing. Physical Optics(PO) is the basic calculation method for RCS prediction and Geometrical Optics(GO) is used for ray tracing in the field calculation of multiple reflection. For RP and ISAR, Fast Fourier Transform(FFT) and Matrix Pencil(MP) method were implemented for post-processing. Those results are integrated into two separate softwares named as Radar Target Signature Generator(RTSG) and Radar Target Signature Analyser(RTSA). Several test results show good performances in radar signature prediction and analysis.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.279-286
• /
• 2018

Radar sensors are used for space situational awareness (SSA) to determine collision risk and detect re-entry of space objects. The capability of SSA radar system includes radar sensitivity such as the detectable radar cross-section as a function of range and tracking capability to indicate tracking time and measurement errors. The time duration of the target staying in a range cell is short; therefore, the signal-to-noise ratio cannot be improved through the pulse integration method used in pulse-Doppler signal processing. In this study, a method of improving the signal-to-noise ratio during range migration is presented. The improved detection performance from signal processing gains realized in this study can be used as a basis for comprehensively designing an SSA radar system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.417-423
• /
• 2012

Radar Cross Section(RCS) is a measure of how detectable an object is with a radar. A larger RCS indicates that an object is more easily detected. Informally, the RCS of an object is the cross-sectional area of a perfectly reflecting sphere that would produce the same amount of reflection strength as the object in question would. In order to estimate RCS of aircraft weapons the external surface is modeled as a collection of simple shape elements. And the overall RCS is estimated as a vector sum of configuring elements' cross-sections which are well known given by analytic formulae. A RCS estimation code is developed for a typical shape of Air-To-Surface bombs and missiles. Size of weapons and location of fins are implemented in the code in addition to the presence of canards. The ability to predict radar return from flying vehicles becomes a critical technology issue in the development of stealth configurations. This simplified method of RCS estimation is known to be fast and accurate enough in an optical region of high frequency incident radio wave.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.4
• /
• pp.80-88
• /
• 2003

Radar signal simulation is increasingly gaining in importance according as modem radar systems are more complex. Although computer performance has been advanced, it is difficult to implement the real-time simulation because the detailed model for the radar is necessary to get the desired accuracy. In order to achieve real time operation, we propose radar signal generation technique using ambiguity function, Instead of wellknown correlation method. The ambiguity function is the mathematical modeling of the signal processing procedure which is a simulation section to require the most computations.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2018

A wave buoy commonly used for measurements in marine environments is very useful for measurements on the sea surface wind and waves. However, it is constantly exposed to external forces such as typhoons and the risk of accidents caused by ships. Therefore, the installation and maintenance charges are large and constant. In this study, we developed a system for monitoring the sea surface wind using marine radar to provide spatial and temporal information about sea surface waves at a small cost. The essential technology required for this system is radar signal processing. This paper also describes the analytical process of using it for monitoring the sea surface wind. Consequently, developing this system will make it possible to replace wave buoys in the near future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.128-137
• /
• 2018

In this paper, we propose a novel class separability measure for radar signals. To reduce the sensitivity of the relative aspect angle between a target and radar, to evaluate the discriminatory power of radar signals, the proposed method first calculates the correlation coefficients between two radar cross sections (RCSs) or linearly shifts one-dimensional (1D) radar signals (i.e., high-resolution range profiles (HRRPs)), or rotates two 2D radar signals (i.e., inverse synthetic aperture radar (ISAR) images). Then, it uses the maximum correlation coefficient when two radar signals are best aligned. Next, the proposed method obtains new correlation-based discriminant matrices (CDM) using maximum correlation coefficients. Finally, the cumulative distribution function (CDF) in the CDM and the value corresponding to the specific probability in the CDF are obtained, and this value represents the discriminatory power of the radar signal. Experimental results show that the proposed method can accurately measure the target separability.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.3
• /
• pp.237-245
• /
• 2001

Radar is an indispensible equipment in all vessels under way. In Korea there are many fishing net buoys near the coast, which causes an enormous threat to safe navigation because it is very difficult to detect the buoys by radar due to their small radar cross section. In this study RTE(Radar Target Enhancer) was installed on the fishing net buoy and its echo was analysed carefully. The results showed the possibility of wide detection of targets, especially small targets such as fishing net buoys, navigation buoys and etc.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.292-302
• /
• 2022

The radar tomographic imaging is based on the Radar Cross-Section "RCS" of the materials of a shape under examination and investigation. The RCS varies as the conductivity and permittivity of a target, where the target has a different material profile than other background objects in a scene. In this research paper, we use Hierarchical Performance Modeling "HPM" and a framework developed earlier to determine/spot bottleneck(s) for pattern recognition of materials using a combination of the Single Layer Perceptron (SLP) technique and tomographic images in radar systems. HPM provides mathematical equations which create Objective Functions "OFs" to find an average performance metric such as throughput or response time. Herein, response time is used as the performance metric and during the estimation of it, bottlenecks are found with the help of OFs. The obtained results indicate that processing images consumes around 90% of the execution time.