• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1537-1544
• /
• 2022

When designing chip, it considers design specification, timing problem, and clock synchronization on place & route (P&R) process. P&R process is complicated because of considering various factors. Chip uses clock tree synthesis (CTS) to reduce clock path delay. The purpose of this study is to examine shallow-CTS algorithm for checking clock tree synthesizable. Using open source Parser-Verilog, register transfer level (RTL) synthesizable Verilog file is parsed and it uses Pre-CTS and Post-CTS process that is included shallow-CTS. Based on longest clock path in the Pre-CTS and Post-CTS stages, the standard deviation before and after buffer insertion is compared and analyzed for the accuracy of CTS. In this paper, It is expected that the cost and time problem could be reduced by providing a pre-clock tree synthesis verification method at the RTL level without confirming the CTS result using the time-consuming licensed EDA tool.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.401-407
• /
• 2010

As according to utilizing mobile devices, the real time locating system to provide high quality service is required. RTLS based on wireless communication can be damaged from radio shadow areas which guarantee the line of sight. To cope with the radio shadow area, this paper proposes the performance improvement method using assistant tags and a directional antenna based reader. In addition, this paper also provides the design and implementation of RTLS and experiments for performance evaluation. The result shows that a success rate is increased up to 38% and accuracy is a CEP of 1.13 meters.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.561-562
• /
• 2008

In this paper, we propose a establishment of system level environment to exploit PC system with SSD (Solid State Disk) by using TLM (Transaction Level Modeling) method with SystemC language. The reason why we choose this modeling method is that it eases RTL (Register Transfer Level) modeling burdens and we can accurately estimate the performance about different architectural changes. Also, it provides simulation speed which is relatively faster than RTL modeling method. The baseline architectural platform we implemented showed that SSD's internal transfer time is a dominant factor, so we need to improve that part and it is expected to be a good simulator to measure the system's overall performance by exploiting SSD's internal architectures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.363-366
• /
• 2007

This paper evaluated the performance of circuit for compensate the frequency offset in OFDM using Simulink and designed a System Generator model for FPGA implementation. System Generator Model generated HDL code and RTL schematic. Also, evaluate the performance through Hardware Co-simulation, and investigated the result of timing analysis and resource estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.106-114
• /
• 2010

We proposed an unified design methodology and verification platform for giga-scale System on Chip (SoC). According to the growth of VLSI integration, the existing RTL design methodology has a limitation of a production gap because a design complexity increases. A verification methodology need an evolution to overcome a verification gap. The proposed platform includes a high level synthesis, and we develop a power-aware verification platform for low power design and verification automation using it's results. We developed a verification automation and power-aware verification methodology based on control and data flow graph (CDFG) and an abstract level language and RTL. The verification platform includes self-checking and the coverage driven verification methodology. Especially, the number of the random vector decreases minimum 5.75 times with the constrained random vector algorithm which is developed for the power-aware verification. This platform can verify a low power design with a general logic simulator using a power and power cell modeling method. This unified design and verification platform allow automatically to verify, design and synthesis the giga-scale design from the system level to RTL level in the whole design flow.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.112-117
• /
• 2013

In order to reuse a register transfer level (RTL)-based IP block, it takes another architectural exploration in which the RTL will be put, and it also takes virtual platforms to develop the driver and applications software. Due to the increasing demands of new technology, the hardware and software complexity of organizing embedded systems is growing rapidly. Accordingly, the traditional design methodology cannot stand up forever to designing complex devices. In this paper, I introduce an electronic system level (ESL)-based approach to designing complex hardware with a derivative of SystemVerilog. I adopted the concept of reuse with higher levels of abstraction of the ESL language than traditional HDLs to design multiplication server farms. Using the concept of ESL, I successfully implemented server farms as well as a test bench in one simulation environment. It would have cost a number of Verilog/C simulations if I had followed the traditional way, which would have required much more time and effort.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.7-17
• /
• 2009

The development of wireless communication MAC layer is usually released as SoC which is a combination in hardware and software. In this system development environment, an environment for software development and verification is necessary because the hardware development takes a lot of time priori to completion. In integrated development of hardware and software, simulation environment of hardware and software provided by hardware modeling using HDL at RTL and ISS respectively. By increasing the development complexity of system, ESL design modeling systems at higher abstraction level than RTL has already prompted. The ESL design is divided untime model and time model. This paper present design and implementation of MCU for untime model simulation, not time model. Proposed MCU can optimize the system at early step of system development and move up the development completion time by verifying the system function easily and rapidly than part required exact time in untime model. In this paper, we present an MCU module based on SystemC and UC/OS-II Module providing real-time operate system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.215-221
• /
• 2007

In Ubiquitous computing, RFID has been become a key technology to provide the real-time location information of users. For this purpose, many recent researches have been conducted regarding RTLS based on the RFID system. In this study, we evaluated the efficiency and feasibility of the velocity gauging system using RTLS based on the RFID system. By using this system, the velocity of mobile units were measured and the accuracy was evaluated with data obtained from DGPS. The results demonstrated that RTLS based on the RFID system would be suitable to measure with relatively low velocity information of mobile units. When RFID infrastructures are being constructed, the developed system will be a better position to increase popularity of velocity information service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.719-721
• /
• 2013

A thinning stage of fingerprint algorithm occupies 39% cycle of microprocessor system for identification processing of image from fingerprint sensor. Hardware block processing is more effective than software one in speed and power consumption, because a thinning algorithm is iteration of simple instructions without a transcendental function. This paper describes an effective hardware scheme for thinning stage processing using Verilog-HDL in $64{\times}64$ Pixel Array. The hardware scheme is designed and simulated in RTL. The logic is also synthesized by XST in FPGA environment and tested. Experimental results show the performance of the proposed scheme and possibility of application for a soft microprocessor and thinning processor embedded fingerprint SoC.