• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.482-485
• /
• 1999

This paper proposes a remote supervisory controlling system of air compressor that is controlled by 80196KC microprocessor. In proposed monitoring system, air compressor located in long distance can be controlled In any condition by RS-232 serial communication. Change of data and abnormal signal of it can be also obtained. The validity of the proposed monitoring system is verified through digital simulations and experiments for air compressor driven by induction motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1177-1182
• /
• 2016

The most industrial instruments for monitoring and control are occurring the extension problem and the external protocol compatibility. In this paper, we developed the boards for the industrial communication monitoring that are able to convert the protocol in various communication between devices and instruments. These are consisted the main board and several sub-board. They can have extension using the main board connection. The sub-board support the each communication method or data transfer. The main board was used the Atmega 2560 Microprocessor of AVR series, and the sub-boards are have the Atmega 256 or Atmega 128 in the AVR series. We have designed to connect the sub-board using placed the 4 RS485 serial slots in the main board. The sub-boards were developed to support the analog and digital I/O. These are able to have monitoring by CAN and Ethernet communication. The experimental results, we obtained good data transfer rate and conversion rate.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.5
• /
• pp.44-51
• /
• 2009

In this paper, an air conditioner peak power control system using electric power line communication has been developed. The air conditioner power control system using RS-485 communication method is hard to install on the existing buildings due to difficulty in cabling, and the system using wireless communication methods has a weak point of not being able to be used in close space, while the developed system has its own advantages of overcoming the above mentioned obstacles. In addition, the system is extended to support not only single-phase electricity system but also three-phase four-wire electricity system, and therefore can be installed anywhere in the domestic environment. The system also has enhanced the ease of deployment, operational stability and economical efficiency by compact circuit design. Considering the current state requiring the energy sayings, the system would greatly contribute to the widespread use of the air conditioner power control system. The superiority in the performance and stability of the system has been proved by the design verification of each component such as remote air conditioner controller, electric power line gateway and so on, and the field test of the whole system.

• ETRI Journal
• /
• v.13 no.2
• /
• pp.15-20
• /
• 1991

생산시점 (Point Of Production)에서 생산정보의 발생원 즉, 기계, 설비, 작업자, 작업대상물 (Work) 등으로부터 생산 정보를 Paperless, 실시간(Real Time)으로 수집하는 장치를 POP 단말기라 하며, POP 단말기와 PC(관리용, 제어용)를 RS232, RS422, RS485 등의 네트워크로 구성하여 전생산라인의 정보를 실시간으로 얻을 수 있다. PC는 PC 상호간 또는 공장의 주컴퓨터(Host Computer)와 LAN(Local Area Network)으로 연결하여 공장 전체를 관리한다. 생산정보 및 라인 가동상태를 주컴퓨터에 연결된 단말기를 통하여 수시로 파악함으로써 생산계획의 수립은 물론 공장의 모든 인적, 물적자원의 효율적인 운용을 가능케 해주는 것이 바로 POP의 개념이다. 본고에서는 이러한 POP 개념의 실현을 위해 기계부품 생산라인을 대상으로 한 POP 단말기 시스팀 개발에 관하여 서술하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1957-1963
• /
• 2017

This paper has proposed a new-type groundwater auto-monitoring system based on Multi-Sensor Device. The system adopted Multi-Sensor Device as host computer of data acquisition, used Windows Mobile which was prevalent operation system of Multi-Sensor Device. It adopted serial port CAN and RS485 as the communication interface between goundwater sensor Device and monitor host machine and utilized serial-linked multi-sensor design to measure effectively according to the depth of groundwater. We present a design for a groundwater monitoring system based on a network of wirelessly linked sensors. The proposed solution will enable groundwater researchers and decision makers to have quick access to the groundwater data with less effort and cost. Though our design is initially meant for groundwater monitoring, it can be easily adapted to other fields of environmental monitoring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.725-732
• /
• 2013

Recently, various applications for LED lightings are growing continuously due to their better performances such as low power consumption, longer life time, operation speed, controllability, high quality color rendering, and sustainability. However, in developing the high-powered LEDs illumination system, heat-sink problem is one of the important obstacle. In this paper, a heat-sink design with multi-layered structure for high-powered LEDs is proposed, which is composed of metal core PCB, heat-pipes, heat-sink plates, and fans. And also, in this paper, a design for LED controls using DMX512 protocols through RS-485 communications is proposed, which is considered as de facto international standard in LEDs illumination control and is widely used in landscape lighting and stage lighting. In this paper, LED control and its application techniques are introduced and the method of wireless remote control for main controller is proposed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.83-90
• /
• 2004

This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system's sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hardwares.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.131-135
• /
• 1995

본 연구에서는 통합환경하에서 운영되는 AGV 시스템을 대상으로 차체 정보의 감시 및 제어가 가능하고, 상위시스템 및 자동화 단위시스템들과 필요 정보를 공유할 수 있는 AGV 운영시스템을 설계/개발하였다. 개발된 시스템의 특징으로는 AGV 차체의 Busy 여부, 이송품 적재 유무, 현재 위치 등과 같은 상태정보의 감시와 이동, 조향, 적재품 이재 등과 같은 제어 명령을 PC에서 자동 모드로 실행 할 수 있다. 또한 상위시스템과의 연결을 위해 PLC를 이용하여 RS-485 통신 Network을 구축하여 상위시스템에서도 별도의 감시 및 제어가 가능하도록 하였으며, 이를 이용하여 시스템을 구성하는 다른 기기와의 정보교환도 가능하다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.545-546
• /
• 2012

스마트폰의 급속한 보급과 다양한 앱(App.)의 지원을 통하여 다양한 시스템에 적용되고 있다. 이러한 다양한 기능을 가지고 있는 스마트폰의 블루투스(bluetooth) 통신기능을 통하여 선박 내에 사용하는 RS-485 기반의 NMEA0183 통신 프로토콜 기반으로 전송되는 통신 데이터를 스마트폰으로 전송할 수 있도록 블루투스 기반의 통신 브릿지를 설계하였다. 또한 안드로이드(android) 기반의 인디케이트용 앱을 개발하여 선박 내에서 전송되는 NMEA0183 기반의 통신 데이터를 모니터링 하도록 시스템을 구현하였다. 본 논문은 선박 내에서 사용하는 NMEA0183 기반의 다양한 통신 데이터를 안드로이드 기반의 인디케이트용 앱을 개발하여 스마트폰 기반의 선박용 인디케이트를 구현 방법을 제시하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.2
• /
• pp.182-189
• /
• 2007

This paper describes the implementation of control and monitoring system of ship's lamps at local area using power line communication method, power line modem(PLM). We design modem, microprocessor interface for electric power control by frequency control and analog to digital signal conversion, lamp device. PLM communication is very economical using existing electric power line unlike RS-232, RS-485 communications. We verify and confirm by experimental work that control and monitor lamp system for ship by an PLM communication.