Browse > Article
http://dx.doi.org/10.6109/jkiice.2016.20.6.1177

The Development of Industrial Communication Monitoring Board using AVR  

Eum, Sang-hee (Department of Shipbuilding and Marine, Dongju College)
Lee, Byong-Hoon (MK Technology)
Publication Information
Journal of the Korea Institute of Information and Communication Engineering / v.20, no.6, 2016 , pp. 1177-1182 More about this Journal
Abstract
The most industrial instruments for monitoring and control are occurring the extension problem and the external protocol compatibility. In this paper, we developed the boards for the industrial communication monitoring that are able to convert the protocol in various communication between devices and instruments. These are consisted the main board and several sub-board. They can have extension using the main board connection. The sub-board support the each communication method or data transfer. The main board was used the Atmega 2560 Microprocessor of AVR series, and the sub-boards are have the Atmega 256 or Atmega 128 in the AVR series. We have designed to connect the sub-board using placed the 4 RS485 serial slots in the main board. The sub-boards were developed to support the analog and digital I/O. These are able to have monitoring by CAN and Ethernet communication. The experimental results, we obtained good data transfer rate and conversion rate.
Keywords
Industrial Communication; AVR; Monitoring; Protocol Conversion; CAN;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 T. Y. Sung, Technology and Market Analysis of Wired and Wireless convergence communications network, Korea Institute of Science and Technology Information, 2013.
2 An Introduction to Industrial Ethernet [Internet]. Available: http://www.bb-elec.com/Learning-Center/All-White-Papers/Ethernet/Introduction-to-Industrial-Ethernet.aspx
3 T. W. Lim, "Industrial Network Technology Trends and Standardization," MS Theses, Inha University, Incheon, Korea, Feb. 2012.
4 H. Zhang, G. Xu, Y. Lu and G. Lou, "Research on the Field Bus Protocol Conversion Gateway," Journal of Convergence Information Technology(JCIT), vol. 7, no. 15, pp. 160-168, Aug. 2012.   DOI
5 Y. Zhang, X. Feng and Y. Guo, "Design of Ethernet-CAN Protocol Conversion Module Based on STM32," International Journal of Future Generation Communication and Networking Advanced Science and Technology Letters, vol.7, no.1, pp. 89-96, Jul. 2014.
6 Texas Instruments, "Introduction to the Controller Area Network (CAN)," SLOA101A-August 2002-Revised, Jul. 2008.
7 S. H. Eum, H, G, Hong, "Development of User Protocol Converter about Modbus and NMEA0183," Journal of the Korea Institute of Information and Communication Engineering, vol. 19, no. 11, pp. 2584- 2589, Nov. 2015.   DOI