• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1176-1181
• /
• 2004

In high-capacity disk drives with ever-growing track density, the allowable level of position error signal(PES) is becoming smaller and smaller. In order to achieve the high TPI(track per inch) disk drive, it is necessary to improve the writing accuracy during the servo track writing(STW) Process through the reduction of track mis-registration sources. Among the main contributors of the non-repeatable runout(NRRO) PES, the disk vibration and the head-stack assembly vibration is considered to be one of the most significant factors. Also the most contributors of repeatable runout(RRO) come from the contributors of NRRO which is written-in at the time of STW process. In this paper, the effect of NRRO on servo written-in RRO is Investigated by experimentally, and the experimental result shows that the written-in RRO can be effectively reduced through a STW process under low dense medium condition such as semi-vacuum.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.415-420
• /
• 2007

The objective of this study analyzes the influence of shimmy & shake phenomena due to tire design parameters which are RFV(radial force variation), DB(dynamic balance), RRO(radial run out) and air pressure. These parameters are inspection items for Q.C. after tires are manufactured. In order to analyze these parameters on this study, vehicle driving tests were achieved. The test modes are two type which are constant speed and coast-down driving. On this tests the dynamic characteristics of shimmy & shake are measured by the 3-axises accelerometers at the various positions that are knuckle(left & right), rack pinion, seat and steering wheel. In according to analyzed results, the longitudinal vibration of knuckle parts affects the lateral vibration of rack pinion and this vibration affects the lateral vibration of steering wheel that is the shimmy phenomena. Also the over and under DB by comparison with normal DB and the increment of RRO affect the occurrence of shimmy & shake phenomena.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.614-619
• /
• 2009

The STW(servo track writing) system which is the process of writing servo signals on disks before assembling in drives uses the spindle motor-chuck mechanism to realize low cost because the spindle motor-chuck mechanism has merit which can simultaneously write multi-disk by piling up disks in hub. Therefore, when the spindle motor-chuck mechanism of horizontal type operates in high rotation speed it is necessary to reduce the effect of RRO(repeatable run-out) and NRRO(non-repeatable run-out) to achieve the high precision accuracy of nano-meter level during the STW process. In this paper, we analyzed that the slip in assembly surfaces can be caused by the mechanical tolerance and clamping force in hub-chuck mechanism and can affect NRRO performance. We designed springs for centering and clamping considering centrifugal force by the rotation speed and assembly condition. The experimental result showed NRRO performance improves about 30 % than case of weak clamping force. The result shows that the optimal design of the spindle motor-chuck mechanism can effectively reduce the effect of NRRO and RRO in STW process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.736-741
• /
• 2004

In high-capacity disk drives with ever-growing track density, the allowable level of position error signal (PES) is becoming smaller and smaller. In order to achieve the high TPI disk drive, it is necessary to improve the writing accuracy during the STW(servo track writing) process through the reduction of TMR sources. Among the main contributors of the NRRO(Non-Repeatable Run-out) PES, the disk vibration and the HSA(head-stack assembly) vibration is considered to be one of the most significant factors. Also the most contributors of RRO(Repeatable Run- out) come from the contributors of NRRO which is written-in at the time of STW(servo track writing) process. In this paper, the experimental test result shows that the effect of NRRO on servo written-in RRO effectively can be reduced through a STW process under low dense medium condition such as semi-vacuum.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2004년도 춘계학술대회
• /
• pp.197-201
• /
• 2004

We describe a new edge detector based on the robust rank-order (RRO) test which is a useful alternative to Wilcoxon test, using $r{\times}r$ window for detecting edges of all possible orientations in noisy images. Some experiments of statistical edge detectors based on the Wilcoxon test and T test with our RRO detector are carried out on synthetic and real images corrupted by both Gaussian and impulse noise. We also implement these edge detectors using Java on the Web.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.539-542
• /
• 2002

The role of disk clamp is to fasten disks to motor and to prevent the slip of disks during operation. This paper examined the effects of the design parameters of disk clamp - thickness, contact radius and cross-sectional shape -on the clamping force and circumferential stress distribution of disk. The large stress variation in circumferential direction results in large disk waveness and will increase repeatable run-out (RRO) finally. The disk clamp-disk-disk spacer system is modeled and the FE analysis is performed by ANSYS. The disk clamp with large contact radius shows more uniform stress distribution than the one with small contact radius and the stiffness variation around circumferential direct ion or the addition of the bending sect ion can make stress distribution uniform.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1159-1165
• /
• 2011

The recording density of HDD is increasing in ratio of 100% each year. Because the increasing of recording density requires the feature of high rotation, fixation and low-noise, fluid hydrodynamic bearing(FDB) has been paid attention to overcome a limitation in ball bearing. Most of researches related to improving performance of FDB have been studied in Japan which has 80% more market share of HDD spindle motor assembly. Main subject of studies are about for the design of the groove shape, manufacturing process of fluid dynamic bearing, performance evaluation and measurement. In HDD, non-repeatable runout(NRRO) is most important parameter which determines the performance of HDD spindle system because NRRO is unpredictable that cannot be compensated in head/slider servo system. In this study, performance evaluation system can measure dynamic behaviors were designed and methodology for calculating imbalance, RRO, and NRRO were proposed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.66-68
• /
• 2009

Most hard disk spindles currently used are supported by oil lubricated hydrodynamic bearings. However, in the trend of increasing spindle speed and reducing size and cost, dynamic behaviors of the bearing such as RRO and NRRO are more important. A novel system evaluating dynamic behavior of hydrodynamic bearings in had disk drive was developed to analyze the effect of groove shapes and parameters.

• 산업기술연구
• /
• 제28권B호
• /
• pp.33-37
• /
• 2008

Recently, there have been intensive researches on the wireless Internet access through WiFi WLAN using WiRro network as backhaul link in the Internet service providing business area. However, in the wireless Internet access method, we need to solve the compatibility problem for different user authentications between licensed WiBro network and unlicensed WiFi network for billing and user management. In this paper, we propose an authentication method for WiFi users by BWAN operators through WiNNERs which is RS connecting the two networks, and discuss the effectiveness of the method.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.136-143
• /
• 2004

This paper presents three algorithms of repetitive controller for compensation of the repeatable runout in hard disk drive. The basic theory of the repetitive controller and the analysis of the disturbance in hard disk drive are introduced. The tracking controller is designed in order to design the "plug-in type" repetitive controller. Design of the repetitive controller is considered as the design of the filter, determination of gain and design of additional compensation for the various types. Specially, trade-off relationship between stability and performance is important for the design. The three kinds of "plug-in type" repetitive controllers are designed, simulated and experimented. Performance and characteristic of them are compared with the analysis of the experimental results.