• Journal of information and communication convergence engineering
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2021

An underwater remotely operated vehicle (ROV) has been implemented. It can inspect foreign substances through a CCD camera while the ROV is running in water. The maximum thrust of the ROV's running thruster is 139.3 N, allowing the ROV to move forward and backward at a running speed of 1.03 m/s underwater. The structural strength of the guard frame was analyzed when the ROV collided with a wall while traveling at a speed of 1.03 m/s underwater, and found to be safe. The maximum running speed of the ROV is 1.08 m/s and the working speed is 0.2 m/s in a 5.8-m deep-water wave pool, which satisfies the target performance. As the ROV traveled underwater at a speed of 0.2 m/s, the inspection camera was able to read characters that were 3 mm in width at a depth of 1.5 m, which meant it could sufficiently identify foreign objects in the water.

• Structural Engineering and Mechanics
• /
• v.18 no.4
• /
• pp.429-440
• /
• 2004

Remotely Operated Vehicle of 6000-meters is a new conceptual equipment made to replace the manned systems for investigating the deep-sea environment, and all of the ROV systems in operational condition strongly depend on the connecting cables. In this point of view dynamics of the ROV cable system is very important for operational and safety aspects as a cable generally encounters great tension. Researches have been executed on this problem, and most of papers have been mainly focused on the operational condition of ROV system in deep sea. This paper presents the dynamic cable response analysis during ROV launching condition rather than the operational one in order to provide the design guide of a ROV cable system in this circumstance, considering the coupling effects between cable and wave-induced ship motion. To obtain the variations of cable tensions during a ROV launching, a pre-stressed harmonic response analysis was carried out. Wave-induced tensions of the cable during ROV launching were obtained in real sea states using FE modeling, and the basic design guide of a ROV cable system was obtained.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.298-304
• /
• 2011

We conducted magnetic survey using IBRV (Ice Breaker Research Vessel) ARAON of KORDI (Korea Ocean Research and Development Institute), ROV (Remotely Operated Vehicle) of Oceaneering Co. and three components vector magnetometer, at Apr., 2011 in the western slope of the caldera of TA25 seamount, the Lau Basin, the southwestern Pacific. The depth ranges of the survey area are from about 900 m to 1200 m, below sea level. For the deep sea magnetic survey, we made the nation's first small deep sea three components magnetometer of Korea. The magnetometer sensor and the data logger was attached with the upper part and lower part of ROV, respectively. ROV followed the planning tracks at 25 ~ 30 m above seafloor using the altimeter and USBL (Ultra Short Base Line) of ROV. The three components magnetometer measured the X (North), Y (East) and Z (Vertical) vector components of the magnetic field of the survey area. A motion sensor provided us the data of pitch, roll, yaw of ROV for the motion correction of the magnetic data. The data of the magnetometer sensor and the motion sensor were recorded on a notebook through the optical cable of ROV and the network of ARON. The precision positions of magnetic data were merged by the post-processing of USBL data of ROV. The obtained three components magnetic data are entirely utilized by finding possible hydrothermal vents of the survey area.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1196-1202
• /
• 2009

In this paper, an estimator design of underwater environment changes is proposed by using observer techniques for ROV control system. The underwater environment changes are considered as an external disturbance term for ROV model and it is added into the input term of ROV model. To estimate the environment changes, a PI observer which does not effect the external disturbance input term is proposed. To verify the effectiveness of the proposed method, the step and the sinusoidal environment changes are considered in simulation. The proposed method will be applied to design the haptic controller for ROV in future.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.161-167
• /
• 2019

In this paper, the performance verification of an around-view sonar and an excavation depth measuring sonar applicable to track-based ROVs (Remotely Operated underwater Vehicles) for heavy duty work is studied. For the performance verification, an experiment is carried out in a water tank and at sea by attaching the around-view sonar and the excavation depth measuring sonar for a heavy work ROV. In the case of the around-view sonar, image sonars are mounted on ROV in four directions (front, back, left and right) and in the case of the excavation depth measuring sonar, the same kind of MBES (Multi Beam Echo Sounder) is mounted on the front of the ROV. The result of an operation test of the ROV equipped with these sonars shows that the sonar systems are rarely affected by high turbidity due to sedimentation during the operation. In the case of the around-view sonar, it is possible to see rock formation, gravel and sandbank 30 m ahead of the ROV. It is confirmed that the excavation depth can be measured after the ROV has performed the excavation. This experiment demonstrates that the ROV can improve the efficiency of the work by utilizing the around-view sonar and the excavation depth measuring sonar.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.68-75
• /
• 2018

This study deals with the heading angle and depth keeping control technique for an ROV with multiple horizontal and vertical thrusters by thrust allocation. The light work class ROV URI-L, which is under development at KRISO, is a redundant actuating system with multiple thrusters that are larger than the ROV's degree of freedom. In the redundant actuating system, there are several solutions for a specific ROV motion to be performed. Therefore, a thrust allocation algorithm that considers the entire propulsion system should be regarded as important. First, this paper describes the propulsion system of the ROV and introduces the thrust allocation method of each motion controller. In addition, the performance of the controller is examined using a heading angle and depth keeping control test in a stationary state.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.94-98
• /
• 2003

Remotely Operated Vehicle. ROV is a new concept equipment being made to replace the manned systems for investigating the deep sea environment. This paper presents the dynamic cable response during ROV launching considering the coupling effects of ship motion. By the harmonic response analysis, the variations of cable tensions were obtained. Harmonic forces in head/beam sea states were calculated by the concept of relative acceleration which obtained by ship motion analysis.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.62-72
• /
• 1993

This paper describes the results of 3 years project on the design and development of a 500 meter class ocean survery ROV model. The design concept and the design procedure are given for each component of the ROV model. The design concept and the design procedure are given for each component of the ROV. Special emphasis is laid on the development of the position control system together with the development of the performance evaluation technique.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1697-1705
• /
• 2022

The safety of marine construction workers and marine pollution problems are occurring due to large-scale offshore construction. In particular, underwater construction work in the sea has a higher risk than other work, so it is necessary to apply an unmanned alternative system that considers the safety of the workers. In this paper, the ROV system for offshore construction has been developed for underwater unmanned work. A monitoring system was developed for position control through the control of underwater propellants, pneumatic gripper, and monitoring of underwater work. As a result of the performance evaluation, the underwater movement speed of the ROV was evaluated to be 0.89 m/s, and it was confirmed that the maximum load of the pneumatic gripper was 80 kg. In addition, the network bandwidth required for underwater ROV control and underwater video streaming was evaluated to be more than 300Mbps, wired communication at 92.7 ~ 95.0Mbit/s at 205m, and wireless communication at 78.3 ~ 84.8Mbit/s.