• Nuclear Engineering and Technology
• /
• 제41권6호
• /
• pp.753-764
• /
• 2009

JAEA started the LSTF experiments in 1985 for the fourth stage of the ROSA Program (ROSA-IV) for the LWR thermal-hydraulic safety research to identify and investigate the thermal-hydraulic phenomena and to confirm the effectiveness of ECCS during small-break LOCAs and operational transients. The LSTF experiments are underway for the ROSA-V Program and the OECD/NEA ROSA Project that intends to resolve issues in thermal-hydraulic analyses relevant to LWR safety. Six types of the LSTF experiments have been done for both the system integral and separate-effect experiments among international members from 14 countries. Results of four experiments for the ROSA Project are briefly presented with analysis by a best-estimate (BE) code and a computational fluid dynamics (CFD) code to illustrate the capability of the LSTF and codes to simulate the thermal-hydraulic phenomena that may appear during SBLOCAs and transients. The thermal-hydraulic phenomena dealt with are coolant mixing and temperature stratification, water hammer up to high system pressure, natural circulation under high core power condition, and non-condensable gas effect during asymmetric SG depressurization as an AM action.

• 원예과학기술지
• /
• 제28권4호
• /
• pp.618-626
• /
• 2010

장미속 종간교잡 후대에서 발견되는 경모유전(matroclinal inheritance) 현상은 세포질 유전, 단위결과, 그리고 비대합적 배우자생식(asynaptic heterogamy)의 결과로 설명될 수 있다. 비대합적 배우자생식은 $Caninae$ 아절($Rosa$ $hybrida$ L. sect. $Caninae$ DC.)의 종간교잡에서 독특하게 관찰되며, 5배체의 경우, 화분세포를 통해서는 2가염색체(2x=14)를 이루는 상동게놈 중 한 게놈(x=7)만이, 난세포에서는 이러한 게놈(x=7)과 더불어 1가 염색체를 이루는 나머지 게놈들(3x=21)이 동시에 유전되어 후대에서 종자친의 배수성(5x=35)이 회복된다. 본 연구에서는 절화장미 품종간 정역교배시 대립유전자의 후대유전 빈도를 관찰함으로써, 4배체 품종교배에서 관찰되는 경모유전의 요인을 분석하고자 하였다. 절화장미 6품종을 이용한 6개 정역교배조합 당 8개의 후대개체를 총 30개의 EST-SSR 마커로 검정해 본 결과, 뚜렷한 세포질 유전의 경우는 발견되지 않았다. 또한, 단위결과의 경우도 'Redtem' ${\times}$ 'Red Sandra' 조합의 후대개체 하나에서만 발견되어, $Caninae$ 아절의 종간교잡에서와 비교하여 상당히 낮은 빈도였다. 비대합적 배우자생식의 예도 $Caninae$ 아절의 경우처럼 뚜렷하게 나타나지는 않았다. 하지만, 6개 공시품종 중, 4개의 품종에서 화분친 보다 종자친으로 교배시 품종 특이적 마커의 후대유전빈도가 상대적으로 높게 나타나 품종에 따라 대립유전자의 모계유전적 성향이 존재함을 증명하였다. 특히 'Yellow King'의 경우, 11개의 대립유전자 중 10개가 종자친일 경우에 후대집단에서 높은 빈도로 나타나 공시품종 중 가장 강한 모계유전성을 보였다.

• 한국문헌정보학회지
• /
• 제56권1호
• /
• pp.387-404
• /
• 2022

본 연구는 서울특별시 J구 구립도서관을 중심으로 '한 도서관 한 책 읽기' 프로그램의 만족도에 영향을 미치는 서비스 품질 요인(프로그램 도서 및 내용, 프로그램 작가 및 인력, 프로그램 서비스 지원, 프로그램 시설 및 환경)과 만족도가 이용의도에 미치는 영향 관계를 통계적으로 검증하는데 목적이 있다. 연구결과 첫째, 프로그램 만족도에 유의미한 정적인 영향을 미치는 서비스 품질 요인에는 프로그램의 도서 및 내용과 프로그램의 작가 및 인력으로 밝혀졌다. 둘째, 프로그램의 만족도는 이용의도에 유의미한 정적인 영향을 미치는 것으로 나타났다. 이상의 결과는 향후 국내 공공도서관에서 실시될 '한 도서관 한 책 읽기' 프로그램 서비스의 질을 제고시키는데 유용한 기초자료로 활용할 수 있을 것이다.

• 원예과학기술지
• /
• 제28권3호
• /
• pp.456-461
• /
• 2010

본 실험은 국내 육성 절화 장미의 효율적인 접삽목 방법을 확립하고자 국내에서 육성된 절화장미($Rosa$ $hybrida$ Hort.)를 사용하여 접수의 채취 부위와 접수와 대목의 고정법에 따른 접삽묘의 발근과 그 이후의 생장에 대하여 조사하였다. 스탠다드 계통의 'Sweet Yellow'와 'Hanmaum' 품종과 스프레이 계통의 'Chelsi'와 'May' 품종을 사용하였다. 대목은 $Rosa$ $indica$ 'Major'를 사용하여 접삽목하여 암면큐브($50{\times}50{\times}50mm$, Delta, Grodan, Denmark)에 식재한 후 온실에 옮기기 전에 접목활착실에서 5일간 저장하였다. 대목의 가시와 잎을 제거하고 상부와 하부의 구분을 위해 마디 사이의 눈을 남기고 한 마디씩 절단하였다. 접삽묘의 활착률을 높이기 위해 굵기가 유사한 접수와 대목을 골라 두 개를 동시에 잡고 날카로운 칼을 이용하여 $45^{\circ}$로 절단하였다. 접수로는 3매엽과 7매엽 마디를 제외하고 5매엽 마디를 사용하였다. 접수의 채취부위는 줄기의 하단에서부터 상(7-9마디), 중(4-6마디), 하(1-3마디)의 3등분 하여 처리하였다. 접수와 대목의 고정법은 튜브, 튜브+파라필름, 튜브+클립 및 클립 고정법을 사용하였다. 채취부위와 품종에 따라 접삽묘의 발근과 생장에 영향을 미쳤다. 발근은 상(7-9마디) 부위에서 좋았다. 채취부위에 따라 발근율, 발근수, 최대근장에서 유의성이 있었으나 신초와 뿌리의 생체중과 건물중, 신초장, 접목활착율은 유의적인 차이가 나타나지 않았다. 접삽묘의 발근과 생장은 접수와 대목의 고정법과 품종에 따라 영향을 받았다. 튜브 고정법은 다른 고정법과 비교 시 대체적으로 접목활착율, 발근율, 발근수에서 높았다. 하지만 접수와 대목의 접목부위가 완벽하게 융합하지 못해 이상비대 하였다. 전체적으로 접삽묘의 발근과 생장에 가장 좋은 고정법은 튜브+클립 고정법으로 나타났다. 클립 고정법은 'Sweet Yellow' 품종을 제외하고 다른 세 품종에서는 생육이 좋지 않았다. 이러한 결과로 튜브+클립 고정법이 가장 효율적인 방법으로 생각되며 시간과 노동력을 절감할 수 있어 기존의 방법인 튜브+파라필름 고정법을 대체할 수 있을 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.7.1-7.14
• /
• 2022

Objectives: This study evaluated the bleaching efficacy of different in-office protocols associated with violet light emitting diode (V-LED), and measured the pulpal temperature rise caused by V-LED with or without gel application. Materials and Methods: Bovine incisors were distributed in 4 groups (n = 10): VL - V-LED; HP - 35% hydrogen peroxide (control); HYB - hybrid protocol, V-LED applied without gel for 10 irradiation cycles followed by V-LED applied with gel for another 10 irradiation cycles; and HPVL - gel and V-LED applied for 20 irradiation cycles. Three bleaching sessions were performed with 7-day intervals. Bleaching efficacy was evaluated with ΔE_ab^*, ΔE₀₀ and ΔWI_D. Data were recorded at baseline, 7, 14, 21 and 70 days. For pulpal temperature rise, thermocouples were placed inside the pulp chamber of human incisors. To determine intrapulpal temperature, the teeth were irradiated with V-LED with or without application of bleaching gel. Color difference data were analyzed by 2-way repeated measures ANOVA and Tukey's test. Pulpal temperature was analyzed by t-test (α = 5%). Results: VL exhibited lower color (ΔE_ab^* and ΔE₀₀) and whiteness changes (ΔWI_D) than the other groups. HPVL presented higher color change values than HYB. HYB and HPVL showed not different ΔWI_D values; and HP showed the highest whiteness changes at all times. There were significant differences comparing ΔT with gel (8.9℃) and without gel application (7.2℃). Conclusions: HPLV was more efficient than HYB. The 2 protocols with VL showed similar results to control. Gel application combined with VL promoted higher pulpal temperature than to the no gel group.

• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.45.1-45.10
• /
• 2022

Objectives: This study evaluated the relationship between the battery charge level and irradiance of light-emitting diode (LED) light-curing units (LCUs) and how these variables influence the Vickers hardness number (VHN) of a bulk-fill resin. Materials and Methods: Four LCUs were evaluated: Radii Plus (SDI), Radii-cal (SDI), Elipar Deep Cure (Filtek Bulk Fill, 3M Oral Care), and Poly Wireless (Kavo Kerr). Irradiance was measured using a radiometer every ten 20-second activations until the battery was discharged. Disks (4 mm thick) of a bulk-fill resin (Filtek Bulk Fill, 3M Oral Care) were prepared, and the VHN was determined on the top and bottom surfaces when light-cured with the LCUs with battery levels at 100%, 50% and 10%. Data were analyzed by 2-way analysis of variance, the Tukey's test, and Pearson correlations (α = 5%). Results: Elipar Deep Cure and Poly Wireless showed significant differences between the irradiance when the battery was fully charged versus discharged (10% battery level). Significant differences in irradiance were detected among all LCUs, within each battery condition tested. Hardness ratios below 80% were obtained for Radii-cal (10% battery level) and for Poly Wireless (50% and 10% battery levels). The battery level showed moderate and strong, but non-significant, positive correlations with the VHN and irradiance. Conclusions: Although the irradiance was different among LCUs, it decreased in half of the devices along with a reduction in battery level. In addition, the composite resin effectiveness of curing, measured by the hardness ratio, was reduced when the LCUs' battery was discharged.

• Restorative Dentistry and Endodontics
• /
• 제49권3호
• /
• pp.26.1-26.14
• /
• 2024

Objectives: This study aimed to investigate the frequency and type of endodontic procedural errors in cases indicated for retreatment through cone-beam computed tomography (CBCT) analysis. Materials and Methods: The sample consisted of 96 CBCT scans, encompassing 122 permanent teeth with fully formed roots. Errors included perforation, instrument fracture, canal transportation, missed canals, and inadequate apical limit of filling. Additionally, potential risk factors were analyzed and subjected to statistical modeling. Results: The most frequent procedural error observed was the inadequate apical limit of filling, followed by canal transportation, perforation, missed canal, and instrument fracture. Statistically significant associations were identified between various procedural errors and specific factors. These include canal transportation and root canal wall, with the buccal wall being the most commonly affected; missed canal and tooth type, particularly the palatine and second mesiobuccal canal canals; inadequate apical limit of filling and root curvature, showing a higher deviation to the mesial direction in severely curved canals; inadequate apical limit of filling and the presence of calcifications, with underfilling being the most frequent; canal transportation and periapical lesion, notably with deviation to the buccal direction; and the direction of perforation and periapical lesion, most frequently occurring to buccal direction. Conclusions: CBCT emerges as a valuable tool in identifying procedural errors and associated factors, crucial for their prevention and management.

• ETRI Journal
• /
• 제43권5호
• /
• pp.916-922
• /
• 2021

We calculated the correlation between the doping concentration of the charge layer and the multiplication layer for separate absorption, grading, charge, and multiplication InGaAs/InAlAs avalanche photodiodes (APDs). For this purpose, a predictable program was developed according to the concentration and thickness of the charge layer and the multiplication layer. We also optimized the design, fabrication, and characteristics of an APD for 20 Gbps application. The punch-through voltage and breakdown voltage of the fabricated device were 10 V and 33 V, respectively, and it was confirmed that these almost matched the designed values. The 3-dB bandwidth of the APD was 10.4 GHz, and the bit rate was approximately 20.8 Gbps.

• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.53-60
• /
• 2023

Purpose: This study evaluated maxillary sinus volume changes in military jet aircraft pilot candidates before and after the training program, in comparison with a control group, considering the effects of pressurization, altitude, and total flight hours, through multislice computed tomography. Materials and Methods: Fifteen fighter pilots were evaluated before initiating the training program and after the final approval. The control group consisted of 41 young adults who had not flown during their military career. The volumes of each maxillary sinus were measured individually before and at the end of the training program. Results: When comparing the initial and final volumes in the pilots, a statistically significant increase was observed both in the left and right maxillary sinuses. When evaluating the average total volume of the maxillary sinuses(i.e., the average volume of the right and left maxillary sinuses together), a significant increase in the volume of the maxillary sinuses was observed in the pilot group when compared to the control group. Conclusion: The maxillary sinus volumes in aircraft pilot candidates increased after the 8-month training program. This may be explained by changes in the gravitational force, the expansion of gas, and positive pressure from oxygen masks. This unprecedented investigation among pilots might lead to other investigations considering paranasal sinus alterations in this singular population.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권4호
• /
• pp.564-573
• /
• 2019

Objective: Evaluate the effects of i) dehulling of lupine seed on chemical composition and apparent metabolizable energy (AME) and ii) soybean meal substitution by dehulled lupine seed in broiler diets with enzymes on productive performance, size of digestive organs and welfare-related variables. Methods: Experiment 1, chemical composition and AME were determined in whole and dehulled lupine seed. Experiment 2, two hundred eighty-eight one-day-old male Ross 308 broilers were used. The experimental diets were maize-soybean meal (MS), MS with enzymes (MSE) and maize-dehulled lupine seed with enzymes (MLE). Diets were assigned to the experimental units under a completely randomized design (eight replicates per diet). The body weight (BW) gain, feed intake, feed conversion, digestive organ weights, gait score, latency to lie down and valgus/varus angulation were evaluated. Results: The dehulling process increased protein (25.0% to 31.1%), AME (5.9 to 8.8 MJ/kg) and amino acid contents. The BW gain of broilers fed the MLE diet was similar (p>0.05) to that of those fed the MS diet, but lower than that of those fed the MSE diet. Feed intake of broilers fed the MLE diet was higher (p<0.05) than that of those fed the MS diet and similar (p>0.05) to those fed the MSE diet. Feed conversion of broilers fed the MLE diet was 8.0% and 8.7% higher (p<0.05) than that of those fed the MS and MSE diets, respectively. Broilers fed the MLE diet had the highest (p<0.05) relative proventriculus and gizzard weights, but had poor welfare-related variables. Conclusion: It is possible to substitute soybean meal by dehulled lupine seed with enzymes in broiler diets, obtaining similar BW gains in broilers fed the MLE and MS diets; however, a higher feed intake is required. Additionally, the MLE diet reduced welfare-related variables.