• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.549-559
• /
• 2016

본 논문은 록 뮤지컬이라는 용어가 지나치게 무분별하게 사용되고 있는 현 시점에, 이 용어에 대한 학문적 정의와 양식적 특성의 규명을 위해 쓰여졌다. 이를 위해 본 논문은 록 음악 및 록 뮤지컬의 역사적 맥록에 대한 이해와 더불어, 록 뮤지컬의 음악 및 극의 특성에 대한 이해를 시도한다. 아울러 본 논문은 60년대 대두된 정통 록 뮤지컬의 음악 및 정신을 계승한 뮤지컬 <렌트>에 사용된 노래들에 대한 유형화 ( 1) 정통 록뮤지컬, 2) 다른 음악 유형의 록적 변형, 3) 록 음악과 다른 음악의 혼합) 를 통해 새로운 록 뮤지컬을 창작하기 위해서는 텍스트에 부합하는 록 음악의 적절한 활용과 혼용이 필요함을 논의해 본다.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.53-69
• /
• 2017

Rock burst may cause serious casualties and property losses, and how to conduct effective monitoring and warning is the key to avoid this disaster. In this paper, we reviewed both the rock burst mechanism and the principle of using electromagnetic radiation (EMR) from coal rock to monitor and forewarn rock burst, and systematically studied EMR monitored data of 4 rock bursts of Qianqiu Coal Mine, Yima Coal Group, Co. Ltd. Results show that (1) Before rock burst occurrence, there is a breeding process for stress accumulation and energy concentration inside the coal rock mass subject to external stresses, which causes it to crack, emitting a large amount of EMR; when the EMR level reaches a certain intensity, which reveals that deformation and fracture inside the coal rock mass have become serious, rock burst may occur anytime and it's necessary to implement an early warning. (2) Monitored EMR indicators such as its intensity and pulses amount are well and positively correlated before rock bursts occurs, generally showing a rising trend for more than 5 continuous days either slowly or dramatically, and the disaster bursts generally occurs at the lower level within 48 h after reaching its peak intensity. (3) The rank of EMR signals sensitive to rock burst in a descending order is maximum EMR intensity > rate of change in EMR intensity > maximum amount of EMR pulses > rate of change in the amount of EMR pulses.

• 한국지반공학회논문집
• /
• 제22권3호
• /
• pp.5-11
• /
• 2006

광안대교에 설치된 두개의 대구경 말뚝(TS-1과 TS-2)에 대하여 최대 2000톤의 하중을 재하하여 정재하시험을 수행하였다. 시험 말뚝 TS-1의 경우는 연암에 근입되었고 시험 말뚝TS-2의 경우는 풍화암에 근입되었다. 재하시험 결과에 의하면, 지지층과 상관없이 시험말뚝 TS-1과 TS-2 양쪽 경우다 대부분의 하중이 풍화암에 의해 지지되었다. 추가적으로 펜타곤3D와 ROCKET 프로그램으로 수치해석을 수행하였다. 본 연구에 의하면 풍화암이 깊게 발달되어 말뚝 시공상 어려움이 있을 경우, 풍화암도 대안의 지지층으로 고려되어질 수 있다.

• 터널과지하공간
• /
• 제12권2호
• /
• pp.83-91
• /
• 2002

암석 버력으로 성토한 사면의 역학적 안정성을 한계평형해석법과 유한차분법으로 검토하였다. 암석 버력 성토사면의 높이는 약 40 m이고 사면의 구배는 1:1.5이다. 암석 버력 성토체의 강도정수 중 점착력은 없고, 내부마찰각은 43$^{\circ}$로 가정하고 사면의 안정성을 해석하였다. 한계평형해석 중 Fellenius법과 Bishop법으로 구한 안전율 Fs는 1.4이었다. 또 유한차분법으로 사면의 안전율을 구하기 위해서 강도감소법을 이용하였고 파괴영역을 기준으로 결정한 사면의 안전율 Fs도 역시 약 1.4로 한계평형해석 결과와 동일하였다. 여러 기관에서 사면설계기준으로 적용하는 안전율 1.3과 비교할 때 암석 버력 성토사면은 안정상태로 확인되었다.

• 한국조경학회지
• /
• 제15권1호
• /
• pp.9-16
• /
• 1987

In Seoul metropolitan area, rockily denuded fores lands are widely distributed. Out of the rock-exposed hillslopes, Kwanak-Samsung mountains and Bookhan-Dobong mountains areas are the most severely eroded land at present To develope the rehabilitation measures for the rock-exposed hillslopes, it is essentially required that mechanisms of rock debris production and movement from the rock-exposed hillslopes should be studied. And also, suitable experiments for planting techniques should be practised at the field level. In this context, some experiments for the on-site fixation of the unstable stone-debris including plantation establishments on the rock-exposed hillslopes, have been carried out for 4 years from 1983 to 1986 at Kwanak mountain hillslopes. The results may be summarized as follows : 1) The soil environment-tolerable tree species for plantation extablishment on rock-exposed hillslopes include Buxus microphylla var. koreana, Forsythia koreana, Juniperus chinensis var. sargentii, Alnus hirsuta and Pinus rigida. These trees have, however, been showed fairly good growth performence at the places having more than about 30cm of soul layer depth above rock-bed. 2) In raising of seedlings to plant on the rock-exposed hillslopes, containerized seedling practices knave been appeared as the most adoptable measures. 3) In fixation of the unstable stole debris-and-sands on the on-site of rock. exposed hillslopes, the stone-lined barrier measures are more effective at comparatively large-sized places of rock-exposed hillslopes while the stone-bowed barrier measures are more effective at small-sifted isolated sold-debris places. The stone-buttressed terraces measures are more effective at the soil-composed hillslopes rather than rock-exposed hillslopes.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.97-104
• /
• 2018

The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.

• 터널과지하공간
• /
• 제21권1호
• /
• pp.50-65
• /
• 2011

이 연구에서는 퇴적암, 화성암, 변성암군의 10개 암종-1,417개의 시험자료를 이용하여 탄성파속도와 각종 역학적 parameter간의 상관성해석을 시행하였다. 해석 과정에서 나타나는 암종과 역학 parameter간의 거동특성이 상의함을 구명하였으며, 거동이 동일한 암종들을 모집단으로 상관성 해석을 하였다. 각종 시험자료는 표본의 규모 검정과 Chi-Square검정을 거친 후 해석에 임하였다. 도출된 추정식들은 95% 신뢰도가 확보됨을 확인할 수 있었다.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.53-62
• /
• 2020

Rheological processes in the rock mass for the stress-strain analysis are quite important when considering the construction of underground structures in soft rock masses, particularly in case of construction in several stages. In the analysis, it can be assumed that the reinforced concrete structure is slightly deformable in relation to the rock mass, and the rheological stress redistribution happens at the expense of the elements of rock mass. The basic elements of rheological models for certain types of rock mass and analysis of these models are presented in the first part of this paper. The second part is dedicated to the analysis of rheological processes in marl rock mass and the influence of these processes on the reinforced-concrete tunnel structure.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.841-849
• /
• 2018

The purpose of a rock bolt is to improve the mechanical performance of a jointed-rock mass. The performance of a rock bolt is generally evaluated by conducting a field pullout test, as the analytical or numerical evaluation of the rock bolt behavior still remains difficult. In this study, wide range of field test was performed to investigate the pullout resistance of rock bolts considering influencing factors such as the rock type, water bearing conditions, rock bolt type and length. The test results showed that the fully grouted rock bolt (FGR) in water-bearing rocks can be inadequate to provide the required pullout resistance, meanwhile the inflated steel tube rock bolt (ISR) satisfied required pullout resistance, even immediately after installation in water-bearing conditions. The ISR was particularly effective when the water inflow into a drill hole is greater than 1.0 l/min. The effect of the rock bolt failure on the tunnel stability was investigated through numerical analysis. The results show that the contribution of the rock bolt to the overall stability of the tunnel was not significant. However, it is found that the rock bolt can effectively reinforce the jointed-rock mass and reduce the possibility of local collapses of rocks, thus the importance of the rock bolt should not be overlooked, regardless of the overall stability.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 1996년도 정기총회 및 학술발표회
• /
• pp.1-10
• /
• 1996

Fracture toughness of rock materials, which generally violate the fundamental assumptions of LEFM, often depends on the specimen size and test method employed. Hence, a standardized procedure for testing and data interpretation for determining fracture toughness of rock materials is required. Special attention has been given by the International Society for Rock Mechanics (ISRM) to the difficulties in obtaining true fracture mechanics parameters for the wide variety of rock materials. (omitted)