• 한국산업융합학회 논문집
• /
• 제6권2호
• /
• pp.131-139
• /
• 2003

The links operating interrupted flow are intend to yield the traffic between the out flow and inflow part effect zone of street section, we build the delay model using the time gap between under construction and not. We review the applicability of interrupted flow, and thus we can put this data to practical use as the basis data to compute the inducement charge for traffic delay. Also building about traffic effect zone of interrupted flow wouldn't produce at the section beside occupying roads and construction cross section, thus we must review the plan to minimize traffic delay by the construction occupying road. In future there must be advanced the incomplete in this study, and groping for the various alternatives to minimize the traffic delay by the road occupying construction, with developing the various sets of detailed analyzing models, that is analysis on the street strength, crossroads geometrical forms of crossroads, public traffics, pedestrians, occupying types.

• Current Research on Agriculture and Life Sciences
• /
• 제19권
• /
• pp.45-54
• /
• 2001

향후 임도사업(林道事業)과 임도배치망(林道配置網) 계획(計劃)에 기초자료(基礎資料)를 제공코자 현재 개설(開設)되어 있는 임도(林道)를 중심으로 임도개설비(林道開設費)에 대한 투자효과(投資效果)를 최대로 하는 최적임도배치(最適林道配置) 및 집재기능(集材機能)을 고려한 임도배치망(林道配置網)을 평가(評價)하였다. 1. 적정(適定) 임도밀도(林道密度) 및 임도연장거리(林道延長距離)를 계산(計算) 비교(比較)한 결과(結果), 각(各) 조사지(調査地)의 유성별(流城別) 기설(旣設) 임도밀도(林道密度)가 이론적으로 계산(計算)한 임도밀도(林道密度)보다 작았으며 앞으로 좀더 많은 임도개설(林道開設)이 필요하였다. 2. 투자효과(投資效果)를 최대(最大)로 하는 임도로선배치법(林道路線配置法)에 의해 계산(計算)한 임도배치망(林道配置網)과 기설(旣設)의 임도배치망(林道配置網)을 비교분석(比較分析)한 결과(結果), 각(各) 조사지(調査地)에서 기설(旣設)의 임도망(林道網)은 공도적(公道的) 기능(機能)을 높이기 위한 임도망(林道網)으로서 우회률(迂回率)이 큰 임도로선망(林道路線網)인 반면, 투자효과(投資效果)를 최대(最大)로 하는 임도배치망(林道配置網)은 공도적(公道的) 기능(機能)이 고려(考慮)되면서 임업적(林業的) 기능(機能)이 고려된 집재기능(集材機能)이 높은 수기형상(樹技形狀)의 임도망(林道網)으로 배치(配置)되어 계획구역(計劃區域)에 골고루 배치(配置)되어 있는 것을 알 수 있었다. 따라서 기설(旣設)의 임도배치망(林道配置網)이 다소 집재기능적(集材機能的)인 면(面)과 임업적(林業的) 기능(機能)이 결여(缺如)된 임도배치망(林道配置網)이라고 하겠으며 앞으로 좀더 투자효과(投資效果)와 집재기능(集材機能)을 고려(考慮)한 임도배치망계획(林道配置網計劃) 필요(必要)하겠다. 3. 각(各) 조사지(調査地)에 대한 평균(平均) 최대집재거리(最大集材距離)와 평균(平均) 집재가능면적(集材可能面積)이 기설(旣設) 임도망(林道網)과 계산(計算)에 의한 임도배치망(林道配置網)에 대한 수평거리(水平距離)와 사거리별(斜距離別) 평균(平均) 최대집재거리(最大集材距離)와 평균(平均) 집재가능면적(集材可能面積)이 다르다는 것을 알 수 있었다. 또한 최대집재수평거리(最大集材水平距離)를 동일하게 적용(適用)했을 경우, 기설(旣設) 임도망(林道網)과 계산결과(計算結果) 임도망(林道網)의 평균(平均) 최대집재거리(最大集材距離)와 평균(平均) 집재가능면적(集材可能面積)이 다르다는 것을 알 수 있었으며, 기설(旣設) 임도망(林道網)을 기준으로 최대집재거리(最大集材距離)를 동일하게 적용(遭用)했을 경우도 최대집재거리(最大集材距離)를 수평거리(水平距離)와 사거리(斜距離)로 구별했을 때에 평균(平均) 최대집재거리(最大集材距離)와 평균(平均) 집재가능면적(集材可能面積)이 다르다는 것을 알 수 있었다. 따라서 임도배치(林道配置)를 가능하면 산능선(山陵線)이나 산복(山腹)을 중심으로 배치(配置)하는 것이 효과적(效果的)이라는 것을 알 수 있었다. 그리고 기설(旣設)의 임도(林道)와 계산(計算)하여 배치(配置)한 임도(林道)의 집재거리별(集材距離別) 평균(平均) 집재가능면적(集材可能面積), 집재면적률(集材面積率)의 수평거리(水平距離)와 사거리(斜距離)의 총 평균값도 차이가 있는 것을 알 수 있다. 이를 볼 때, 기설(旣設)의 임도(林道)보다는 투자효과(投資效果)를 최대(最大)로 하는 임도배치망(林道配置網)이 임업적(林業的) 기능(機能)과 집재기능적(集材機能的)인 면(面)에서 더욱 효과적(效果的)이고 최대집재거리(最大集材距離)를 수평거리(水平距離)보다 사거리(斜距離)로 계산(計算)했을 경우가 집재가능면적(集材可能面積)이 작으므로 임도배치망(林道配置網)을 가능하면 산복(山腹)과 산능선(山陵線)을 중심으로 배치(配置)하는 것이 집재기능(集材機能)을 더욱 높일 수 있다는 것을 알 수 있었다. 따라서 앞으로 임도로선배치계획시(林道路線配置計劃時)에 가능하면 집재기능(集材機能)을 고려(考慮)하여 집재가능면적(集材可能面積)을 크게 할 수 있도록 임도배치망(林道配置網)을 구축(構築)할 필요가 있겠다. 4. 현재(現在) 개설(開設)되어 있는 임도로선(林道路線)이 산능선부(山稜線部), 산복부(山腹部), 계곡부중(溪谷部中) 어느 구역을 중심으로 개설(開設)되어 있는지를 평가(評價)하기 위해 임도로선(林道路線)의 위치(位置)를 조사(調査)한 결과(結果), 기설(旣設)의 임도로선(林道路線)이 대부분 산복부(山腹部)와 계곡부(溪谷部) 중심으로 배치(配置)되어 있었으며, 기설(旣設)의 임도망(林道網)이 집재기능(集材機能)이 다소 결여된 임도배치망(林道配置網)이므로 향후 좀더 집재작업(集材作業)시스템을 고려(考慮)한 임도로선배치(林道路線配置)가 요망(要望)된다.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.299-308
• /
• 2010

The indirect approach for measuring the bridge frequencies from the dynamic responses of a passing vehicle is a highly potential method. In this study, the effect of road surface roughness on such an approach is studied through finite element simulations. A two-dimensional mathematical model with the vehicle simulated as a moving sprung mass and the bridge as a simply-supported beam is adopted. The dynamic responses of the passing vehicle are solved by the finite element method along with the Newmark ${\beta}$ method. Through the numerical examples studied, it is shown that the presence of surface roughness may have negative consequence on the extraction of bridge frequencies from the test vehicle. However, such a shortcoming can be overcome either by introducing multiple moving vehicles on the bridge, besides the test vehicle, or by raising the moving speed of the accompanying vehicles.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.298-304
• /
• 2012

The development of low rolling resistance tire with weight reduction in tire and vehicle may induce high level of tire/road noise, especially the rumble road noise on rough road. In this paper, the design factor for good rumble noise is considered in view of tire and vehicle. For the 3 mid-sized sedans, the rumble noise is very sensitive to the test vehicle. And it is concluded that the tire with high tread part stiffness and low sidewall part stiffness shows best rumble noise performance, and the rumble noise is in trade-off relation with cavity resonance noise. So, it is desirable to select and change proper construction design factors to have good tire/vehicle rumble noise.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.69-76
• /
• 2006

The effects of the additional visual and auditory stimuli on the loudness evaluation of road traffic noise was investigated by the method of magnitude estimation. As a result, it was shown that additional visual stimulus of noise barrier can influence on the loudness perception of road traffic noise. Also, additional auditory stimuli such as green music or sound of flowing water can influence on the loudness perception of road traffic noise, approximately 5~10% lower than the absence of stimuli. But this effect was disappeared in the range of over 65dB(A).

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.134-146
• /
• 1996

Numerical and experimental studies are performed to investigate the effect of the underbody shape of the simplified road vehicle on drag and life. Four different vehicle models with front and rear slanted variations at the lower surface are used in this study. Cases with a slanted underbody surface at front have smaller drag than those without a slanted surface. Also, cases with a slanted underbody surface at rear have smaller lift than those without a slanted surface. Pressure distributions along the model surfaces and velocity fields at the wake region are examined in detail. In general, numerical solutions are in agreement with experimental results.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.47-56
• /
• 2013

PURPOSES: This study is to evaluate a ground water level effect on frost heaving in road pavements. METHODS: The effects of water table on frost heaving in pavement systems were evaluated from the mechanical analysis using FROST program. The input parameters and boundary conditions were determined by considering climates, pavement sections, and material properties specially subgrade soil types in Korea. RESULTS: When the water table located above the freezing depth, amount of frost heaving caused by freezing the water in pavement itself was big enough to damage in pavement system, although pavement system consists of fully non-frost-susceptible materials with sufficient thickness of anti-freezing layer. The amount of frost heaving was decreased rapidly with increasing the distance between the water table and freezing depth. CONCLUSIONS: It was concluded that there is no engineering problems related with frost heaving in practical sense when the distance between freezing depth and water table is over 1.5m for having subgrade soils less than 50% of #200 sieve passing to meet specification on quality control in Korea.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.225-233
• /
• 2007

Road runoff water is one of the non-point sources (NPSs) of pollution negatively influencing drinking water source. Numerous road runoff NPS waters have been studied for over the last decade. However, the sources of pollution can be conditional, seasonal, or accidental. Therefore, measurement of pollutant loadings in different site is necessary to estimate the effect of road runoff water. The objective of this study was to examine the quality of road runoff water from a city bridge in Seoul, Korea. This study was conducted for two years to assess annual discharge pollution loads. In this study, key water quality parameters including chemical oxygen demand ($COD_{Cr}$), biochemcial oxygen demand ($BOD_5$), total nitrogen (T-N), total phosphorus (T-P), and suspended solid (SS) were measured at 18 different events. The results showed that typically the pollutant concentrations are higher at the beginning of each event and decrease afterwards. The first 20% of the volume of the runoff from each event is transporting 46% ($COD_{Cr}$), 48% ($BOD_5$), 50% (T-N), 34% (T-P), 30% (SS), respectively. The event mean concentrations (EMCs) were $COD_{Cr}$ (199 mg/L), $BOD_5$ (41.2 mg/L), T-N (7.97 mg/L), T-P (0.42 mg/L) and SS (113 mg/L). Although the results were consistent with the previous study (Barbosa and Hvitved-Jacobsen, 1999), $COD_{Cr}$, $BOD_5$, T-N exhibit a stronger first flush effect compared to the other contaminants.

• 상하수도학회지
• /
• 제27권3호
• /
• pp.299-312
• /
• 2013

This study investigated the contaminant loading and characteristics of particle size distributions(PSDs) in the rainfall runoff from two different sources, the pavement road and the ancillary parking lot, and then evaluated four different types of filter media(i.e., EPP, EPS, Zeolite, and Perlite) to treat runoff water. The results showed that runoff from the pavement road contains 5.6 and 20 times higher SS and Pb concentrations, respectively, than that from the parking lot. The particles smaller than $100{\mu}m$ occupied 89.8 % of runoff from the pavement road and 81.4 % of that from the parking lot by volume. The effect of the hydraulic loading, at 950 m/day filtering linar velocity and 40 cm head loss, was largest for Zeolite, followed by Perlite, EPS, and EPP. The return period of tested media calculated by the regression equation for head loss indicated that EPP has the longest life time. The average SS removal rate was similar for all media at between 84.9 % and 89 %, while the effect of various filter column heights was different, showing minimal for EPP and maximum for EPS. All filter media tested demonstrated over 95 % of SS treatment efficiency for the particles bigger than $100{\mu}m$, while for the ones smaller than $100{\mu}m$ the efficiency was in order of EPP(82.4%) > Perlite(76.1 %) > EPS(66.2 %) > Zeolite(65.2 %). The results in conclusion implies that EPP is most effective filter media for the highly contaminated fine particles from road runoff.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.82-88
• /
• 2018

본 논문에서는 차량 주행 시 노면으로부터 진동 에너지를 흡수해 에너지 하베스팅을 통해 전기에너지 발생이 가능한 전자기 현가장치의 구조와 현가장치 내에 결합되어 전자기 댐퍼 역할을 하는 8극 8상의 선형 발전기의 구조를 검토하였다. 실제 주행 노면에 따른 전자기 현가장치의 에너지 하베스팅 효과를 비교하기 위해 차량 시뮬레이션 프로그램인 Carsim과 Simulink를 연동하여 민군 겸용 차량 모델을 사용해 두 가지 실제 노면인 아스팔트 노면과 비포장도로 노면 조건에 대한 모의 주행시험을 수행한 결과, 아스팔트 노면과 비포장도로에서 현가장치의 상대 변위 각각 8mm, 13mm의 결과가 나타났다. 다음으로 전자기 현가장치 내에 결합된 선형 발전기를 모델링 하여 도출한 현가장치 상대 변위 값을 적용해 상용 전자기 해석 프로그램인 ANSYS MAXWELL을 이용해 동일한 해석조건을 적용하여 해석 시간 0.3s 동안 전자기 시뮬레이션을 수행하여 시간에 따른 발전량 결과를 도출해 비교하였으며 비포장도로와 아스팔트 노면에서의 평균 발전량은 각각 198.6W, 98.7W로 비포장도로의 경우 103.7% 높은 값을 보이는 것을 확인하였다. 마지막으로 노면의 주파수와 현가장치 입력 변위가 발전 출력에 영향을 끼치는 민감도를 비교한 결과 두 변수의 민감도는 각각 1.725, 1.283으로 노면 주파수가 전자기 시뮬레이션 출력변수인 평균 발전량에 34.5 % 높은 영향을 끼치는 결과를 확인하였다.