• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.153-164
• /
• 2009

This Paper presents the severity analysis result of the year 2006 national pedestrian crashes using the data base of 37,589 records prepared for the National Police Bureau. A set of attributing factors considered to affect pedestrian crash patterns were selected, and their contributing effects were investigated by applying the Ordered Logit Model. This model was selected because this model has been able to afford satisfactory results when the dependent variable involved ordered severity levels; fatal, injury, and property- damage-only in this investigation. The investigation has unveiled the followings; First, the pedestrian crash patterns were dependent upon human -drivel and pedestrian- characteristics including gender, age, and drinking conditions. Second, other contributing factors included vehicle, roadway geometric, weather, and hour of day characteristics. Third, seasonal effect was not contributive to crash patterns. Finally, the application of the Ordered Logit Model facilitated the ordered severity level analysis of the pedestrian crash data. This paper concludes that conventional wisdom on the pedestrian crash characteristics is largely truthful. However, this conclusion is limited only to the data used in this analysis, and further research is required for its generalization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.287-296
• /
• 2015

Recent navigation systems provide quick guide services, based on processing real-time traffic information and past traffic information by applying predictable pattern for traffic information. However, the current pattern for traffic information predicts traffic information by processing past information that it presents an inaccuracy problem in particular circumstances(accidents and weather). So, this study presented a more precise predictive traffic information system than historical traffic data first by analyzing route search data which the drivers ask in real time for the quickest way then by grasping traffic congestion levels of the route in which future drivers are supposed to locate. First results of this study, the congested route from Yang Jae to Mapo, the analysis result shows that the accuracy of the weighted value of speed of existing commonly congested road registered an error rate of 3km/h to 18km/h, however, after applying the real predictive traffic information of this study the error rate registered only 1km/h to 5km/h. Second, in terms of quality of route as compared to the existing route which allowed for an earlier arrival to the destination up to a maximum of 9 minutes and an average of up to 3 minutes that the reliability of predictable results has been secured. Third, new method allows for the prediction of congested levels and deduces results of route searches that avoid possibly congested routes and to reflect accurate real-time data in comparison with existing route searches. Therefore, this study enabled not only the predictable gathering of information regarding traffic density through route searches, but it also made real-time quick route searches based on this mechanism that convinced that this new method will contribute to diffusing future traffic flow.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.246-249
• /
• 2010

Diacylglycerol (DAG) was produced from lipase by the catalyzed synthesis of soybean oil (SBO) and glyceryl monooleate (GMO) with Lipozyme TLIM (Thermomyces lanuginosa). Effects of reaction time, molar ratio and enzyme road were studied. When 2:1, 1:1 and 1:2 (SBO:GMO) molar ratios with 20% Lipozyme TLIM were applied in a 1-hr reaction, the concentrations of DAG produced were 17.8, 20.0 and 20.4 g/100 g oil, respectively. Different amounts (2, 5, 10 and 20%) of Lipozyme TLIM were used at a 1:2 (SBO:GMO) molar ratio, and the concentrations of DAG produced in a 1-hr reaction were 10.8, 14.0, 16.9 and 20.4 g/100 g oil, respectively. During a 72-hr reaction, 10.8-22.7 g/100 g oil of DAG were produced under the reaction conditions in this study.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.90-94
• /
• 2010

In this study it is intended to review the moving characteristics of smoke by performing visualization simulation for the calculation of the optimal smoke exhaust air volume in case a fire occurs in tunnels where transverse ventilation is applied, and to obtain basic data necessary for the design of smoke exhaust systems by deriving optimal smoke exhaust operational conditions under various conditions. As a result of this study, if it was assumed 0 critical velocity in the tunnel, the smoke exhaust air volume was limited within 250 meter in the road-tunnel disaster prevention indicator and the exhaust efficiency was from 55.1% to 95.8% in the result of this study. If the wind velocity is in the tunnel, the exhaust rate intends to increase rapidly and the exhaust efficiency is decreased. In addition, if the wind velocity is increased, the exhaust rate should be increased in compared with the generation rate of smoke in maximum 1.8 or 1.04 times. In this study, when the wind velocity is in the tunnel, the limited exhaust rate is $84m^3/s{\cdot}250m$. And if it was assumed 1.75 m/s critical velocity in the tunnel, the exhaust rate would be defined $393m^3/s{\cdot}250m$($Q_E$ = 80 + 5Ar).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.493-501
• /
• 2016

In this study, core technologies of a traction system on a mountain tram operating on the track of mountain road full of sharp curves and steep gradients were developed. In domestic mountain resort areas, sometimes the transportation service is not provided in winter because of ice and heavy snow on roads, so a mountain railway service independent of the climate and geographic conditions is needed. A traction system was designed taking into account of the power of a traction motor to climb the gradient of 120 ‰, which is common in domestic mountainous areas. and power transmission system was designed to consider the installation space for the traction system. In addition, a reduction gear and a propeller shaft were developed. An elastic pinion was developed and applied to the rack & pinion bogie system for steep gradient so that noise and vibration generated by contact between the steel gears could be reduced. Impact comparison tests showed that the vibration level of the elastic pinion is one-third lower than that of previous steel pinion. Independent rotating wheels and axles were developed for the bogie system to operate on the sharp curve of a 10 meter radius. In addition, the band braking system was developed to enhance the braking force during running on the steep gradient. A test for the braking force showed it exerts the required braking force. The performance of the developed core components were verified by the tests and finally they were applied to the bogie system running on the track of steep gradient and sharp curve.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.133-140
• /
• 2016

The Ministry of Land, Infrastructure and Transport has introduced low-floor buses, which are convenient for passengers getting on and off the bus and for the handicapped. The standard bus model is 11 m long and uses compressed natural gas (CNG). However, this model has drawbacks in narrow rural road conditions such as those in farming and fishing villages and mountainous areas, as well as difficulty in refueling since CNG facilities are not readily available. In this study, running resistance values were obtained by coasting performance tests on actual roads using a Tata Daewoo LF-40 model with three different weight conditions: curb vehicle weight (CVW), half vehicle weight (HVW), and gross vehicle weight (GVW).The test methods include WHVC, NIER-06, and constant-speed driving at 60 km/h. These tests were used to measure the fuel economy of vehicles other than the target vehicles to obtain the combined fuel economy. The energy efficiency was highest in the case of CVW. In the WHVC mode, the fuel consumption rates of HVW and GVW were typically 3.5% and 12% higher than that of CVW, respectively. In constant-speed driving, the fuel efficiency of HVW was higher than that of CVW. Further research is required to analyze the exhaust gas data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.599-607
• /
• 2017

Since 2015, small and medium domestic enterprises that treat more than a certain quantity of chemical substances in accordance with the Chemical Substance Control Act are obliged to submit an off-site impact assessment and risk management plan. In order to reduce the administrative and economic burden of the risk assessment, its impact was determined. Toxic leaks of nitric acid, methanol, and acetic acid were estimated and the correlations (between them?) were calculated. In addition, the correlations of this study were used to compare the KORA results according to the accident scenarios of the actual workplace and the extent of the damage as a function of distance in the case of toxic leaks. In this study, the correlation formula of the materials can be used to quickly determine the damage distance in the event of the accidental leakage of materials in the road or workplace, and to prepare emergency plans and respond to emergencies more quickly.

• Journal of Korea Multimedia Society
• /
• v.10 no.2
• /
• pp.209-217
• /
• 2007

This paper proposed to a detection scheme of weather information that is a part of CCTV Images Weather Detection System using CCTV images and Temperature, Humidity. The previous Partial Weather Detection System uses how to acquire weather information using images on the Road. In the system the contrast and RGB Values using clear images are gained. This information is distributed a input images to cloud, rain, snow and fog images. That is, this information is compared the snow and the fog images for acquisition more correctness information us ing difference images and binary images. Currently, We use to environment sense system, but we suggest a new Weather Detection Algorithm to detect weather information using CCTV images. Our algorithm is designed simply and systematically to detect and separate special characteristics of images from CCTV images. and using temperature & humidity in formation. This algorithm, there is more complex to implement than how to use DB with high overhead of time and space in the previous system. But our algorithm can be implement with low cost' and can be use the system in real work right away. Also, our algorithm can detect the exact information of weather with adding in formation including temperature, humidity, date, and time. At last, this paper s how the usefulness of our algorithm.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.359-368
• /
• 2017

What is the term "intelligence information society", which is a term that has been continuously discussed recently? This means that the automation beyond the limits of human ability in the whole societies based on intelligent information technology is a universalized social future. In particular, it is a concept that minimizes human intervention and continuously pursues evolution to data (or big data) -based automation. For example, autonomous automation is constantly aiming at unmanned vehicles with artificial intelligence as a key element. However, until now, intelligent information research has focused on the intelligence itself and has made an effort to improve intelligence logic and replace human brain and intelligence. On the other hand, in order to replace the human labor force, we have continued to make efforts to replace workers with robots by analyzing the working principles of workers and developing optimized simple logic. This study proposes important strategies and directions to implement intelligent information education policy and intelligent information technology research strategy by suggesting access strategy, education method and detailed policy road map for intelligent information technology research strategy and educational service. In particular, we propose a phased approach to intelligent information education such as basic intelligence education, intelligent content education, and intelligent application education. In addition, we propose education policy plan for the improvement of intelligent information technology, intelligent education contents, and intelligent education system as an important factor for success and failure of the 4th industrial revolution, which is centered on intelligence and automation.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.2
• /
• pp.43-54
• /
• 2018

Underwater tracked vehicle is employed to perform underwater heavy works on saturated seafloor. When an underwater tracked vehicle travels on the seafloor, shearing action and ground settlement take place on the soil-track interface, which develops the soil thrust and soil resistance, respectively, and they restrict the tractive performance of an underwater tracked vehicle. Thus, unlike the paved road, underwater tracked vehicle performance does not solely rely on its engine thrust, but also on the soil-track interaction. This paper aimed at evaluating the tractive performance of an underwater tracked vehicle with respect to ground conditions (soil type, and relative density or consistency) and vehicle conditions (weight of vehicle, and geometry of track system), based on the soil-track interaction theory. The results showed that sandy ground and silty sandy ground generally provide sufficient tractions for an underwater tracked vehicle whereas tractive performance is very much restricted on clayey ground, especially for a heavy-weighted underwater tracked vehicle. Thus, it is concluded that an underwater tracked vehicle needs additional equipment to enhance the tractive performance on the clayey ground.