• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.259-264
• /
• 1995

Recently, in order to achieve high flexibilty, monitoring and control strategies of a new type have been developed. This paper investigates the fesability of using scoustic emission signal analysis for the detection of built-up edge during machining. Results for maching SM45C steel show that the presence of a built-up edge can significantil affect the generation of acoustic emission in metal cutting. When the cutting speed comes to the conditions conducive to development of built-up edge, it is shown that the slope of curve-fitted AErms signal undergoes a change. The fesability of utilizing AErms in built-up edge sensing is sugested.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2001

$SiC_{x}N$_{y}$ film is deposited by electron cyclotron resonance plasma chemical vapor deposition system using $SiH_4$(5% in Ar), $CH_4$ and $N_2$. Ternary phase $SiC_{x}N$_{y}$ thin film deposited at the microwave power of 600 W and substrate temperature of 700 contains considerable amount of strong C-N bonds. Change in $CH_4$flow rate can effectively control the residual film stress, and typical surface roughness of 34.6 (rms) was obtained. Extreme]y high hardness (3952 Hv) and optical transmittance (95% at 633 nm) was achieved, which is suitable for a LIGA mask membrane application.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.71-79
• /
• 1998

RTCVD법으로 증착된 다결정 Si$_{1-x}$Ge$_{x}$박막에서 Ge조성 증가에 따른 결정립크기변화가 표면거칠기 및 cluster크기에 미치는 영향에 대해 알아본결과, Ge조성 증가에 따라 결정립크기가 증가했으며 증가된 결정립에 의해 Cluster 크기와 표면거칠기값(RMS)들이 증가함을 알 수 있었다. 또한 증착된 다결정 Si$_{1-x}$Ge$_{x}$박막을 RF power와 온도변화에 따라 Ar/H$_{2}$플라즈마를 이용한 수소화처리를 행하여, 수소화 효과와 표면거칠기값 그리고 비저항값 변화에 대해 조사하였다. 수소화처리 후 cluster크기와 표면거칠기값은 기판온도와 RF power 증가에따라 감소함을 알 수 있었으며 특히 기판온도 30$0^{\circ}C$에서는 비저항값이 상당히 증가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.245-245
• /
• 2008

In this work, we describe the characterization of PVP films synthesized by spin-coater method and fabricate OTFTs of a bottom gate structure using pentacene as the active layer and polyvinylphenol (PVP) as the gate dielectric on Au gate electrode. We investigated the surface and electrical properties of PVP layer using an AFM method and MIM structure, and estimated the device properties of OTFTs including $I_D-V_D$, $I_D-V_G$, threshold voltage $V_T$, on/off ratio, and field effect mobility.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.56.2-56
• /
• 2001

For the improvement of minimum sensing angular velocity of ring laser gyro, the influence of a low-scattering mirror application to laser resonator was investigated. Super polishing technique was employed for the fine mirror substrates of less than 1-${\AA}$-rms roughness. Mirror coating using ion-beam sputtering coating machine produced low-scattering mirror less than 30-ppm scattering. As a result of the mirror application to ring laser, the minimum sensing angular velocity of the gyro was improved down to about 0.1 deg/sec.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.14-17
• /
• 2005

The SrRuO_{3}$ films for application of the bottom electrode were deposited on p-Si (001) substrates by metalorganic chemical vapor deposition (MOCVD). The films are characterized by various deposition parameters. The optimum deposition condition for SRO films is the deposition temperature of $500{\circ}C$, Sr/Ru input mol ratio of 1.0, and a flow rate of precursors of 15 ml/h. The films deposited by an optimum condition exhibited a single phase of SrRuO_{3}$, an rms roughness of 8 nm, and a resistivity of approximately $900{\mu}{\Omega}{\cdot}cm$. The high resistivity of the films for application of a bottom electrode should be improved through a characterization of an interface.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.180-185
• /
• 1998

Microwave polarimetric backscattering from a various types of grassland canopies has been analyzed by using the first-order radiative transfer theory in this paper. Leaves in the grassland are modeled by rectangular resistive sheets, which sizes (widths and lengths) and orientations (elevation and azimuth angles) are randomly distributed. Surface roughness and soil moisture of the ground plane under the grass canopy is considered in this computation. The backscattering coefficients of grasslands are computed for different radar parameters (angles, frequencies and Polarizations) as well as different canopy Parameters (size and orientation distributions of leaves, canopy depth, moisture contents of leaves and soil, rms height and correlation length of soil surface). A radar system for 15GHz has been fabricated and used for measurement of the scattering coefficient from a grass canopy. The computation result obtained by the scattering model for the grass canopy is compared with the measurements.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.72-74
• /
• 2003

We fabricated textured Ag substrates for coated conductor and evaluated the effects of annealing temperature on microstructural evolution, texture formation, and surface morphology. A strong {110}〈110〉 textured Ag substrate was obtained by cold rolling and annealing at 80$0^{\circ}C$: the full-width at half-maximum(FWHM) value of {110}〈110〉 poles was as sharp as 10$^{\circ}$. Surface morphology was evaluated by using Atomic force microscopy(AFM). Root-mean-square(RMS) roughness of the substrate annealed at 80$0^{\circ}C$ was 39.2 nm. The substrate of strong texture and smooth surface, fabricated in our study, is considered to be suitable for use as a substrate for deposition of superconductor films.

• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.143-146
• /
• 1997

The effects of deposition rate on exchange coupling field Hex and coercive field Hc in NiO spin-valves are discussed. The Hex and Hc increased with deposition rate of NiO film. The rms roughnesses of the NiO deposited at 6 ${\AA}$/min (NiO-Low) and 30${\AA}$/min (NiO-High) were almost similar, however, the short-range roughness increased with the deposition rate. The Hex, Hc and surface morphologies for the modulated NiO spin-valve films such as NiO-Low\NiO-High\NiO-Low and NiO-High\NiO-Low were investigated.

• Journal of Surface Science and Engineering
• /
• v.37 no.3
• /
• pp.169-174
• /
• 2004

MgO thin films were reactively deposited using an internal inductively coupled plasma assisted sputtering method varying reactive gas ratio to get stoichiometric film composition, and bipolar dc substrate bias to suppress micro arcs. The minimum frequency required for arc suppression was about 10KHz depending on ICP power. Their crystallinity was analyzed using X-ray diffraction and surface morphology using AFM. The surface was very smooth with rms roughness less than 0.42nm. The preferred orientation of the films were changing from (200) to bulk-like characteristics as Ar: $O_2$ratio was controlled to 10 : 2. Optical emission spectroscopy revealed that there were two distinct discharge modes: a blue one and a green one, where enhanced emission from Ar and Mg were observed. This cannot simply be understood by metallic or oxide mode of reactive sputtering due to ICP coupled to magnetron discharge.