• 인터넷정보학회논문지
• /
• 제25권1호
• /
• pp.123-136
• /
• 2024

사이버보안 정책을 선도하는 미 국방부의 사이버보안 제도는 크게 2가지 방식으로 대외 군납업체 보안인증을 위한 CMMC와 내부기관대상 보안평가를 위한 RMF가 있다. 우리 군의 경우, 2026년부터 한국형 RMF(K-RMF)를 적용할 예정이다. 더불어 미 국방부가 발주하는 사업에 참여하는 국내 방산업체들은 2025년 10월전까지 CMMC인증을 사전 취득해야 하는 입장에 있다. 본 논문에서는 CMMC와 RMF 보안감사 준비업무를 동시에 지원할 수 있는 새로운 표준 컴플라이언스 메타모델(R3C) 개발방법론과 R3C메타모델을 기초로 한 컴플라이언스 솔루션 구현 결과물에 대해 소개하고 있다. 본 연구는 2022년 이후 국방부 합동참모본부 주관 한/미 국방 사이버보안 업무지원 자동화 솔루션 개발프로젝트를 수행하면서 얻은 미 국방 사이버보안 제도에 대한 실무 노하우를 토대로 진행되었다. 개발된 컴플라이언스 솔루션기능은 한/미 연합모의훈련 실무에 활용되고 있다. 본 연구를 통해 개발된 컴플라이언스 솔루션은 민간에도 제공할 예정이며, CMMC인증을 취득해야 하는 국내 방산업체에게 매우 유용하리라 예상한다.

• 정보보호학회논문지
• /
• 제32권6호
• /
• pp.1183-1192
• /
• 2022

정보 및 정보를 생산, 처리, 폐기하는 시스템은 정보의 총수명주기에 걸쳐 일정수준의 보안이 유지되어야 한다. 일정수준의 보안을 유지하기 위해 소프트웨어 및 자동차 개발, 미국 연방정부 정보체계 등 시스템 수명주기의 보안관리 프로세스를 적용하고 있으나, 우리나라에는 이와 유사한 보안관리 프로세스가 전무한 실정이다. 본 논문에서는 국방 분야 정보 및 정보 처리시스템의 총수명주기에 걸쳐 일정수준의 보안을 유지하기 위한 한국형 보안위험관리 프레임워크를 제안한다. 국방 분야에 적용할 수 있는 한국형 보안위험관리 프레임워크의 개발 목적과 적용방안을 소개함으로써 향후 국방 보안업무가 나가야 할 방향을 제시하고 보안 패러다임의 전환을 유도하고자 한다

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1535-1540
• /
• 2013

In this paper, the Radial Magnetic Force(RMF) and cogging torque which cause vibration and noise in IPM type BLDC motor were analyzed. The cogging torque and RMF cause electromagnetic vibration. So, a notch was installed for the equilibrium of RMF and cogging torque reduction. The notch was analyzed by using a Fourier Series for the energy distribution of the air-gap. The equilibrium of RMF and the reduction of cogging torque were performed by a Design Of Experiment(DOE) with the notch. Also, operating characteristics and efficiency were analyzed and compared.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.141-147
• /
• 2016

Staphylococcus aureus cultures exposed to rotating magnetic field (RMF) were studied in order to analyse the possible induced changes in staphylococcal enterotoxin genes (se) expression. Liquid cultures of S. aureus strains carrying different se were exposed to the RMF of magnetic frequency 50 Hz and magnetic induction 34 mT for 10 h at $37^{\circ}C$. Three time points of bacterial growth cycle were considered for RNA extractions. Gene expression analyses were evaluated using real-time quantitative PCR method. The present study confirmed, that the RMF can stimulate the growth rate of S. aureus cultures in comparison to the unexposed controls, while the stimulation is not strain dependent. The studies have also shown, that the RMF, depending on the exposure time but regardless the bacterial strain, can influence on the expression of various se. In general, except for sea, as a result of bacterial exposure to the RMF through subsequent growth phases, the expression of se decreased, reaching the values below results recorded for unexposed controls. In the case of sea expression remained at a lower level as compared to the control, regardless the time of exposition.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.377-382
• /
• 2016

In this paper, influence of vibration on cogging torque and Radial Magnetic Force(RMF) imbalance was investigated in the IPM type BLDC motor. Design of cogging torque reduction and the RMF equilibrium was proceed applied to Design of Experiment(DOE). Vibration test results, the RMF imbalance was confirmed that a significant impact of vibration.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.25-32
• /
• 1998

Most recent seismic design codes include Response Modification Factor(RMF) for determining equivalent lateral forces. The RMF is used to reduce the linear elastic design spectrum to account for the energy dissipation capacity, overstrength and damping of the structure. In this study the RMF is defined as the ratio of the absolute maximum linear elastic base shear to the absolute maximum nonlinear base shear of a structure subject to the same earthquake accelerogram. This study investigates the effect of hysteretic model, as well as target ductility ratio and natural period on duct based RMF using nonlinear dynamic analyses of the SDOF systems. Special emphasis is given to the effects of the hysteretic characteristics such as strength deterioration and stiffness degradation. Results indicate that RMFs are dependent on ductility, period and hysteretic model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.321-326
• /
• 2013

This paper investigates the magnetic excitation force of a surface-mounted permanent magnet (SPM) motor according to the change of pole/slot combination. The characteristics of magnetic flux and radial magnetic force (RMF) due to pole/slot combination were analyzed by using magnetic circuit analysis. Also, the RMF of motors with the variable pole/slot combination was numerically simulated by using the finite element analysis to verify the result of the magnetic circuit analysis. This research shows that RMF ripple is reduced when the number of pole is smaller than the number of slot.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1275-1284
• /
• 2018

A rotating magnetic field (RMF) was applied in the solidification process of Cu-8Fe alloy. Focus on the mechanism of RMF on the solid solution Fe(Cu) atoms in Cu-8Fe alloy, the influences of RMF on solidification structure, solute distribution, and material properties were discussed. Results show that the solidification behavior of Cu-Fe alloy have influenced through the change of temperature and solute fields in the presence of an applied RMF. The Fe dendrites were refined and transformed to rosettes or spherical grains under forced convection. The solute distribution in Cu-rich phase and Fe-rich phase were changed because of the variation of the supercooling degree and the solidification rate. Further, the variation in solute distribution was impacted the strengthening mechanism and conductive mechanism of the material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• 한국정보과학회논문지:시스템및이론
• /
• 제35권5호
• /
• pp.187-198
• /
• 2008

본 논문은 그리드 서비스 환경에서 효율적인 자원 관리를 위한 프레임워크를 개발한다. 자원 관리는 그리드 서비스의 핵심이며, 자원의 가변적 특성에 적응적으로 대처하기 위한 프레임워크인 GridRMF(Grid Resource Management Framework)를 모델링하고 개발한다. GridRMF는 그리드 자원의 참여 의도에 따라 계층적으로 관리한다. 계층적 자원 관리는 가상 조직 관리를 위한 VMS(Virtual organization Management System)와 메타데이타 관리를 위한 RMS(Resource Management System)로 관리 도메인을 구분한다. VMS는 최적 가상 조직 선택 전략에 의해 자원을 중개하며, LRM(Local Resource Manager) 자동 회복 전략에 의해 가상 조직의 결함에 대처한다. RMS는 자원 상태 모니터링 정보를 적응적 성능 기반 작업 할당 알고리즘에 적용하여 부하균등화와 결함에 대처한다.