• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.271-273
• /
• 2005

Islanding of PV systems occurs when the utility grid is removed but local sources continue to operate and provide power to local loads. Islanding is one of the serious problems in an electric power system connected with dispersed power sources. Also, this can present safety hazards and the possibility of damage to other electric equipments. If the real and reactive power of RLC load and PV system are closely matched, islanding phenomena can't be detected by the passive methods. Several active methods were proposed to detect islanding phenomena. The most effective method is SFS method which was suggested by Sandia National Laboratory. In this paper, a new anti-islanding algorithm is proposed and its validity is verified through simulation and experimental results for utility interconnection of PV system.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.187-191
• /
• 2016

Retrieving the equivalent electromagnetic parameters (permittivity and permeability) plays an important role in the research and application of metamaterials. Frequency dispersion of magnetic permeability has been theoretically predicted in a metamaterial composed of cut wire pairs (CWP) separated by dielectric substrate on the basis of circuit theory. Magnetic resonance resulting from antiparallel currents between the CWP is observed at the frequency of minimum reflection loss (corresponding to absorption peak) and effective resonator size can be determined. Having calculated the circuit parameters (inductance L, capacitance C) and resonance frequency from CWP dimension, the frequency dispersion of permeability of Lorentz like magnetic response can be predicted. The simulated resonance frequency and permeability spectra can be explained well on the basis of the circuit theory of an RLC resonator.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.413-415
• /
• 1995

This paper presents a new approach in the design of multiple power output electronic ballasts for compact fluorescent lamps which power output range of 11W, 15W, 20W by using equivalent resistance and RLC equivalent circuit concept and frequency control. A multiple power output electronic ballast which adopts half-bridge inverter topology is set up to compare the results of PSpice simulation with experimental ones. Starting characteristics of lamp voltage, lamp current and light output are better than the existing electronic ballasts, and therefore is verified the validity of the proposed method.

• Journal of the Korean Society for Railway
• /
• v.7 no.1
• /
• pp.65-69
• /
• 2004

In reference to this study, Part Ⅰ showed how the system respond to the harmonics originated from electric locomotives. That is, the system response to the harmonics was derived by computational algorithm with numerical formulas in theoretical aspects. However, Real catenary system has complex configuration of conductors and it is an important point that if we can consider the circuit element of catenary conductors as an uniformly distributed RLC element. Moreover, harmonic characteristics in electric locomotive depend on its operational modes. From these point of view, measurements of harmonics are performed for real railway power supply systems under the various operational modes, and spectrum and distortion analyses in measurement data are described.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.227-232
• /
• 2023

In this study, complex admittance as a function of temperature and frequency was measured to analyze the important relaxation properties of lead scandium niobate, which is physically important, although it is not an environmentally friendly electrical and electronic material, including lead. Lead scandium niobate was synthesized by heat treating the solid oxide, and the conductance, susceptance and capacitance were measured as a function of temperature and frequency from the temperature dependence of the RLC circuit. The relaxation characteristics of lead scandium niobate were found to be affected by contributions such as grain size, grain boundary characteristics, space charge, and dipole arrangement. As the temperature rises, the maximum admittance and susceptance increase in one direction, but the resonance frequency decreases below the transition temperature but increases after the phase transition.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.123-135
• /
• 2005

3GPP RLC protocol specification adopted a window-controlled selective-repeat ARQ scheme for provisioning reliable data transmission. Inevitably, the re-ordering issue arises in the 3GPP's ARQ since it belongs to the selective-repeat ARQ clan. A long re-ordering time results in the degradation of throughput and delay performance, and may invoke the overflow of the re-ordering buffer. Also, the re-ordering time must be regulated to meet the requirements of some services which are both loss-sensitive and delay-sensitive. In the 3GPP's ARQ, we may deflate the occupancy of the re-ordering buffer by reducing the window size and/or length of the status report period. Such a decrease, however, deteriorates the throughput and delay performance and encroaches the resource of the reverse channel. Aiming at reducing the occupancy at the re-ordering buffer while suppressing the degradation of throughput and delay performance, we propose threshold-dependent occupancy control schemes, identified as post-threshold and pre-threshold schemes, as supplements to the 3GPP's ARQ. For judging the effectiveness of the proposed schemes, we investigate peak occupancy, maximum throughput and average delay in the practical environment involving fading channels. From the simulation results, we observe that the proposed schemes invoke the performance trade-off between occupancy and throughput in general. Also, we reveal that the post-threshold scheme is able to improve the throughput and delay performance of the ordinary 3GPP's ARQ without inflating the occupancy of the re-ordering buffer.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.51-61
• /
• 2007

For provisioning reliable data transmission, the 3GPP RLC specification adopted a selective-repeat ARQ scheme assisted by a window-based admission control scheme. In the 3GPP ARQ, which is a member of the selective-repeat ARQ clan, inheres the reordering problem A long and irregular reordering time results in the degradation of throughput and delay performance, and may incur the overflow of the reordering buffer. Furthermore, the reordering time must be regulated to meet the requirements of some services which are loss-sensitive and delay-sensitive as well. Perceiving the reordering hazard, we propose an alternative, identified as snowball scheme, to the original admission control scheme of the 3GPP ARQ with aiming at deflating the occupancy of the reordering buffer. A unique feature of the snowball scheme is to reject a new DATA PDU if it is non-adjacent to any DATA PDU sojourning at the reordering buffer. Such an intentional rejection apparently reduces the occupancy of the reordering buffer while it may deteriorate the throughput and delay performance. Developing an analytical approximation method, we investigate the effect of snowball scheme on the saturated occupancy and throughput. Also, we, using a simulation method, evaluate the peak occupancy, normalized throughput and average delay in the practical environment. From the simulation results, we reveal that the snowball scheme is able to enhance occupancy performance as well as throughput performance compared with the original admission control scheme of the 3GPP ARQ.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.93-100
• /
• 2011

This paper presents a technical study for the first short stroke lightning current generator using a crowbar device. The so-called crowbar-technology is most common to make 10/350[${\mu}s$] impulse currents with high amplitude, and the lightning current generator with crowbar device has an economic advantage than the nominal RLC current generator. But both the operating efficiency and the operating reliability of crowbar spark gap are very important to design the current generator. So, the peaking circuit which consists of small capacitors and a spark gap is applied. And the multi-step coil for controlling the circuit constant at the different test conditions is used. The presented test facility is designed to perform impulse tests with amplitudes up to 50[kA] of 10/350[${\mu}s$].

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.65-68
• /
• 2003

3GPP's RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In 3GPP ARQ, distinctive windows are provide at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at reordering buffer, which results in a long reordering time. Aiming at suppressing the occupancy at reordering buffer, we propose a occupancy control scheme in this paper. In this scheme, a threshold is created in the receiving station's window and a data PDU out of the threshold (but within the window) is treated according to go back N ARQ. By the employment of the occupancy control scheme, the occupancy at the reordering buffer is apparently reduced, while the delay performance may be degraded due to the properties of go back N ARQ. We, thus, investigate the peak occupancy and mean delay performance by a simulation method. From numerical examples, we observe a trade-off in both performance measures and conclude that the peak occupancy is effectively reduced by setting a proper threshold under a constraint on mean delay performance.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.339-353
• /
• 2014

A straightforward method for optimal determining of a high frequency inductor's parasitic capacitance is presented. The proposed estimation method is based on measuring the inductor's impedance samples over a limited frequency range bordering on the resonance point considering k-dB deviation from the maximum impedance. An optimized solution to k could be obtained by minimizing the root mean squared error between the measured and the estimated impedance values. The model used to provide the estimations is a parallel RLC circuit valid at resonance frequency which will be transferred to the real model considering the mentioned interval of frequencies. A straightforward algorithm is suggested and programmed using MATLAB which does not require a wide knowledge of design parameters and could be implemented using a spectrum analyzer. The inputs are the measured impedance samples as a function of frequency along with the diameter of the conductors. The suggested algorithm practically provides the estimated parameters of a real inductance model at different frequencies, with or without design information. The suggested work is different from designing a high frequency inductor; it is rather concentration of determining the parameters of an available real inductor that could be easily done by a recipe provided to a technician.