• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.233-238
• /
• 2010

In this paper, we applied the forward and backward error recovery techniques to a reduced instruction set computer (risc) processor to develop two fault-tolerant processors, namely, fetch redundant risc (FRR) processor and a redundancy execute risc (RER) processor. To evaluate the fault-tolerance capability of three target processors, we developed the base risc processor, FRR processor, and RER processor in SystemC hardware description language. We performed fault injection experiment using the three SystemC processor models and the SystemC-based simulation fault injection technique. From the experiments, for the 1-bit transient fault, the failure rate of the FRR, RER, and base risc processor were 1%, 2.8%, and 8.9%, respectively. For the 1-bit permanent fault, the failure rate of the FRR, RER, and base risc processor were 4.3%, 6.5%, and 41%, respectively. As a result, for 1-bit fault, we found that the FRR processor is more reliable among three processors.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.473-480
• /
• 2021

To achieve the high-speed implementation of post-quantum cryptography, primitive operations should be tailored to the architecture of the target processor. In this paper, we present the optimized implementation of multiplier operation on RISC-V processor for post-quantum cryptography. Particularly, the column-wise multiplication algorithm is optimized with the primitive instruction of RISC-V processor, which improved the performance of 256-bit and 512-bit multiplication by 19% and 8% than previous works, respectively. Lastly, we suggest the instruction extension for the high-speed multiplication on the RISC-V processor.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2022

RISC-V is an open-source instruction set architecture which has a simple base structure and can be extensible depending on the purpose. In this paper, we designed a small and low-power 32-bit RISC-V processor to establish the base for research on RISC-V embedded systems. We designed a 2-stage pipelined processor which supports RISC-V base integer instruction set except for FENCE and EBREAK instructions. The processor also supports privileged ISA for trap handling. It used 1895 LUTs and 1195 flip-flops, and consumed 0.001W on Xilinx Zynq-7000 FPGA when synthesized using Vivado Design Suite. GPIO, UART, and timer peripherals are additionally used to compose the system. We verified the operation of the processor on FPGA with FreeRTOS at 16MHz. We used Dhrystone and Coremark benchmarks to measure the performance of the processor. This study aims to provide a low-power, high-efficiency microprocessor for future extension.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1617-1622
• /
• 2004

MPEG/Audio decoder for mobile multimedia systems requires low power consumption. Implementations of AV decoder using a single RISC processor often need high power consumption owing to cash-miss in case of insufficient cash memory. In this paper, we present a MPEG/Audio decoder for mobile handset applications and implement it on a RISC processor embedding a minimized DSP accelerator. Audio decoding algorithm is splined into two parts; computation intensive and control intensive parts. Those parts we, respectively, allocated to DSP and RISC core, which are designed to run in parallel to increase the processing efficiency. The proposed system implements MP3 and AAC decoders at l7MHz and 24MHz clocks, which are reductions of 48% and 40% of complexities in comparison with implementations on a single RISC processor. The proposed method is adequate for mobile multimedia applications with insufficient cash memory.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.27-32
• /
• 2022

RISC-V is an open instruction set architecture (ISA) developed in 2010 at UC Berkeley, and active research is being conducted as a processor to compete with ARM. In this paper, we propose an SoC system including an RV32I ISA-based 32-bit 5-stage pipeline processor and AHB bus master. The proposed RISC-V processor supports 37 instructions, excluding FENCE, ECALL, and EBREAK instructions, out of a total of 40 instructions based on RV32I ISA. In addition, the RISC-V processor can be connected to peripheral devices such as BRAM, UART, and TIMER using the AHB-lite bus protocol through the proposed AHB bus master. The proposed SoC system was implemented in Arty A7-35T FPGA with 1,959 LUTs and 1,982 flip-flops. Furthermore, the proposed hardware has a maximum operating frequency of 50 MHz. In the Dhrystone benchmark, the proposed processor performance was confirmed to be 0.48 DMIPS.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2023

Recently, demand for embedded systems requiring low power and high specifications has been increasing, and RISC-V processors are being widely applied. RISC-V, a RISC-based open instruction set architecture (ISA), has been developed and researched by UC Berkeley and other researchers since 2010. RV32I ISA is sufficient to support integer operations such as addition and subtraction instructions, but M-extension should be defined for multiplication and division instructions. This paper proposes an RV32I, RV32IM processor, and indicates benchmark performance scores compared to an existing processor. Additionally, A non-stalling method was proposed to support a 2-stage pipelined DSP multiplier to the 5-stage pipelined RV32IM processor. Proposed RV32I and RV32IM processors satisfied a maximum operating frequency of 50 MHz on Artix-7 FPGA. The performance of the proposed processors was verified using benchmark programs from Dhrystone and Coremark. As a result, the Coremark benchmark results of the proposed processor showed that it outperformed the existing RV32IM processor by 23.91%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.239-245
• /
• 2019

RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. Born in academia and research, RISC-V ISA delivers a new level of free, extensible software and hardware freedom on architecture, paving the way for the next 50 years of computing design and innovation. In this paper, according to the emergence of RISC-V architecture, we describe the RISC-V processor instruction set constituted by arithmetic logic, memory, branch, control, status register, environment call and break point instructions. Using ModelSim and Quartus-II, 38 instructions of RISC-V has been successfully simulated and synthesized.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.416-420
• /
• 1999

This paper describes a 32-bit RISC processor, which has instruction level compatibility with the ARM7 microprocessor. The processor is fully synthesizable, and its performance is evaluated based on 0.35-${\mu}{\textrm}{m}$ CMOS library. This paper focuses on the implementation of the processor and the reliable verification strategy ensuring the complete instruction level compatibility. The processor has successfully verified using a FPGA chip.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.603-604
• /
• 2008

This paper implemented The LED illuminance control IP based on 8bit RISC Processor. 8bit RISC Processor designed hardware interrupts, an interface for serial communications, a timer system with compare-capture-reload resources and a watchdog timer. LED Array consists of Red, Green, Blue, White and Warm White. The illuminance control IP is used to LED Board control with 8bit data.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.931-934
• /
• 1999

For applications in multimedia to which genuine RISC microprocessors are not suitably applicable, a new generation of fast and flexible microprocessors is required. In this paper, as a technique of integrating DSP functionality in a general RISC processor, a RISC that can execute DSP extension instructions is developed to improve the performance of multimedia application execution. This processor can execute DSP instructions in parallel with the execution of ALU instructions for efficient and fast execution. In addition, the execution ability of integer instructions is improved by enhancing the RISC core itself.