• Korean Journal of Veterinary Service
• /
• v.20 no.3
• /
• pp.297-306
• /
• 1997

This study was conducted to identify the effects of caffeine on the change of blood chemistry components in the serum of the rat(Sprague-Dawley, female). The experimental groups were divided into 7 groups according to the time lapsed after a single oral administration of 100mg/kg caffeine(that is control, 2, 4, 8, 24, 48 and 72 hrs lapsed group) to the rats. The concentrations of glucose, urea nitrogen, uric acid, creatinine, total protein, albumin, A/G ratio, triglyceride, total cholesterol, HDL-cholesterol, free fatty acid and phospholipid as well as the activities of alanine aminotransferase(ALT), aspartate aminotransferase (AST) and alkaline phosphatase(ALP) were measured in the serum of each experimental groups. The results obtained from this study were summarized as follows ; 1. The concentrations of serum glucose were significantly higher($\rho$<0.01) between 4 (143.0 mg/dl) and 8 hrs(138.0mg/dl) in comparison to the control(101.1mg/dl) after a single oral administration of caffeine(100mg/kg). Whereas there were no significant differences in the concentrations of urea nitrogen, uric acid, creatinine, total protein, albumin and albumin/globulin(A/G) ratio in comparison to the control. 2. The concentrations of total cholesterol and HDL-cholesterol in serum were significantly higher ($\rho$<0.01) between 4(77.4mg/dl, total cholesterol) and 8 hrs(64.7mg/dl, HDL-cholesterol) in comparis to the control(62.8, 46.7mg/dl) after a single oral administration of caffeine (100 mg/kg). On the other hand, the concentrations of triglyceride in serum were significantly lower($\rho$<0.01) after 8 hrs(38.8mg/dl) in comparison to the control(66.5mg/dl). 3. The activities of AST in serum was significantly higher($\rho$<0.05) from 2 hrs(149 U/L) to 8 hrs(178 U/L) in comparison to the control(112 U/L) after a single oral administration of caffeine (100mg/kg). The activities of ALT in serum were significantly higher($\rho$<0.01) at 4(45.5 U/L), 24(49.3 U/L), 48(46.8 U/L) and 72 hrs(42.3 U/L) in comparison to the control (39.7 U/L) after a single oral administration of caffeine (100mg/kg) On the other hand, there were no significant differences in the activities of ALP in comparison to the control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.52-52
• /
• 2008

The positive temperature coefficient of resistivity (PTCR) effect in (1-x)$BaTiO_3$ - $x(Bi_{0.5}K_{0.5})TiO_3$ doped with $Nb_2O_5$ was investigated. $(Bi_{1/2}K_{1/2})TiO_3$ (BKT) is more environment-friendly than $PbTiO_3$ in order to use in PTC thermistors. The incorporation of 1 mol% BKT to $BaTiO_3$ increased the Curie temperature (Tc) to $148^{\circ}C$. Doping of $Nb_2O_5$ to $Ba_{0.99}(Bi_{0.5}K_{0.5})_{0.01}TiO_3$ (BaBKT) ceramic has enhanced its PTCR effects. For the sample containing 0.025 mol% $Nb_2O_5$, it showed good PTCR properties; low resistivity at room temperature (${\rho}_r$) of 30 $\Omega{\cdot}cm$, a high PTCR intensity of approximately $3.3\times10^3$, implying the ratio of maximum resistivity to minimum resistivity (${\rho}_{max}/{\rho}_{min}$) in the measured temperature range, and a large resistivity temperature factor (a) of 13.7%/$^{\circ}C$ along with a high Curie temperature (Tc) of $167^{\circ}C$. In addition, the cooling rate of the samples during the sintering process had an influence on their PTCR behavior. All the samples showed the best ${\rho}_{max}/{\rho}_{min}$ ratio when they have cooled down at a rate of $600^{\circ}C$/min.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.937-946
• /
• 1995

In this research, the processing control of NiCuZn Ferrite has been developed. The relationship between initial permeability and bulk density of NiCuZn Ferrite with processing factors was studied. NiCuZn Ferrite, which calcinated at $700^{\circ}C$ for 3 hours, was ball milled for about 60 hours to make a size of $0.5\mu\textrm{m}$ followed by granulation using spray dryer. The physical properties and the magnetic properties of NiCuZn Ferrite were investigated with the processing factor, such as (i) granule size and forming pressure, and (ii) sintering temperature. The green density of NiCuZn Ferrite was largely depended on the forming pressure rather than its granule size. The green density of NiCuZn Ferrite was increased from $2.484\;g/cm^{3}$ to $3.002\;g/cm^{3}$ with increase in forming pressure. The bulk density of NiCuZn Ferrite was increased from $3.470\;g/cm^{3}$ to $4.754\;g/cm^{3}$ linearly with increase in sintering temperature. The relationship between initial permeability and bulk density of NiCuZn Ferrite was expressed with the empirical equation,$\mu_{i}=a+b_{\rho}+c_{\rho}^2$ at forming pressure and sintering temperature.

• Composites Research
• /
• v.32 no.5
• /
• pp.284-289
• /
• 2019

In the present paper, the dynamic force-moment equilibrium equations, driving power and energy equations are analyzed to formulate the equation for fuel economy(km/liter) equivalent to the driving distance (km) divided by the fuel volume (liter) of the vehicle, a selected model of gasoline powered KIA K3 (1.6v). In addition, the effects of the dynamic parameters such as speed of vehicle (V), vehicle total weight(M), rolling resistance ($C_r$) between tires and road surface, inclined angle of road (${\theta}$), as well as the aerodynamic parameters such as drag coefficient ($C_d$) of vehicle, air density(${\rho}$), cross-sectional area (A) of vehicle, wind speed ($V_w$) have been analyzed. And the possibility of alternative materials such as lightweight metal alloys, fiber reinforced plastic composite materials to replace the conventional steel and casting iron materials and to reduce the weight of the vehicle has been investigated by Ashby's material index method. Through studies, the following results were obtained. The most influencing parameters on the fuel economy at high speed zone (100 km/h) were V, the aerodynamic parameters such as $C_d$, A, ${\rho}$, and $C_r$ and M. While at low speed zone (60 km/h), they are, in magnitude order, dynamic parameters such as V, M, $C_r$ and aerodynamic ones such as $C_d$, A, and ${\rho}$, respectively.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.256-264
• /
• 2019

Lymphotoxin ${\beta}$ receptor ($LT{\beta}R$), a member of the tumor necrosis factor receptor family, plays an important role in lymphoid tissue's architecture and organogenesis. In contrast, MLCK and ROCK play critical roles in the regulation of stress fiber (SF) formation in cells. To determine whether $LT{\beta}R$ stimulation in fibroblastic reticular cells (FRCs) is involved in these signaling pathways, myosin light chain kinase inhibitor-7 (ML-7) was used to inhibit them. ML7-treated FRCs completely blocked SFs and showed retraction and shrinkage processes comparable to those observed in agonistic anti-$LT{\beta}R$ antibody-treated cells. The inhibition of ROCK activity with Y27632-induced changes in actin cytoskeleton organization and cell morphology in FRCs. Actin bundles rearranged into SFs, and phospho-myosin light chain (p-MLC) co-localized in FRCs. We checked the level of Rho-guanosine diphosphate (RhoGDP)/guanosine triphosphate (GTP) exchange activity using FRC lysate. When $LT{\beta}R$ was stimulated with agonistic anti-$LT{\beta}R$ antibodies, Rho-GDP/GTP exchange activity was markedly reduced. Regarding $LT{\beta}R$ signaling with a focus on MLCK inhibition, we showed that the phosphorylation of MLCs was reduced by $LT{\beta}R$ stimulation in FRCs. Cytoskeleton components, such as tubulin, b-actin, and phospho-ezrin proteins acting as membrane-cytoskeleton linkers, were produced in de-phosphorylation, and they reduced expression in agonistic anti-$LT{\beta}R$ antibody-treated FRCs. Collectively, the results suggested that MLCK and ROCK were simultaneously responsible for SF regulation triggered by $LT{\beta}R$ signaling in FRCs.

• Anxiety and mood
• /
• v.18 no.2
• /
• pp.39-47
• /
• 2022

Objective : This study investigated brain functional connectivity in male firefighters who showed subclinical post-traumatic stress disorder (PTSD) symptoms. Methods : We compared the data of 17 firefighters who were not diagnosed with PTSD and 18 healthy controls who had no trauma exposure. The following instruments were applied to assess psychiatric symptoms: Korean version of the Post-traumatic stress disorder Checklist for DSM-5 (PCL-5-K), Beck Depression Inventory-II (BDI-II), Beck Anxiety Inventory (BAI). For all subjects, functional magnetic resonance imaging was performed, and functional connectivity was compared between the two groups (family-wise error-corrected p<0.05). Additionally, correlations between psychiatric symptoms and functional connectivity were explored. Results : The following connectivity was higher than that of healthy controls: 1) the central opercular cortex-superior temporal gyrus, 2) planum polare-parahippocampal gyrus, 3) angular gyrus-amygdala, and 4) temporal fusiform cortex-parahippocampal gyrus. The functional connectivity of 1) the lateral occipital cortex-inferior temporal gyrus, 2) superior parietal lobule-caudate, and 3) middle temporal gyrus-thalamus were lower in firefighters. In firefighters, the connectivity of the planum polare-parahippocampal gyrus showed a negative correlation with the severity of arousal symptoms (rho=-0.586, p=0.013). The connectivity of the middle temporal gyrus-thalamus showed a positive correlation with the severity of intrusion (rho=0.552, p=0.022) and arousal symptoms (rho=0.619, p=0.008). The connectivity of the temporal fusiform cortex-parahippocampal gyrus was negatively correlated with intrusion (rho=-0.491, p=0.045) and arousal (rho=-0.579, p=0.015). Conclusion : Our results indicate that the brain functional connectivity is associated with occupational trauma exposure in firefighters without PTSD. Therefore, this study provides evidence that close monitoring and early intervention are important for firefighters with traumatic experience even at a subthreshold level.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.99-104
• /
• 2009

The $\beta$-glucosidase gene from Streptomyces coelicolor A3(2) was cloned and expressed in Escherichia coli. The ORF consisted of 1377 nucleotides encoding 51 kDa in a predicted molecular weight. Effects of pH indicated that the $\beta$-glucosidase showed similar activity using $\alpha$-pNPG($\rho$-nitrophenyl-$\alpha$-D-glucopyranoside), $\beta$-pNPG($\rho$-nitrophenyl-$\beta$-D-glucopyranoside), and $\beta$-pNPF($\rho$-nitrophenyl-$\beta$-D-fucopyranoside) at range of pH 3 to 10, and high activity using $\beta$-pNPGA ($\rho$-nitrophenyl-$\beta$-D-galactopyranoside) from pH 5 to 10, especially, 3.3 times higher activity at pH 9. Effects of temperature indicated that the $\beta$-glucosidase showed low activity using $\alpha$-pNPG, $\beta$-pNPG, and $\beta$-pNPF from $20^{\circ}C$ to $70^{\circ}C$, and increased activity using $\beta$-pNPGA from $30^{\circ}C$ to $50^{\circ}C$, 1.8 times higher activity at $50^{\circ}C$ than at $30^{\circ}C$. According to activity determination of other substrates, the enzyme was active on daidzin, genistin, and glycitin, inactive on esculin and apigenin-7-glucose. The EDTA and DTT as reducing agents inhibited $\beta$-glucosidase activity, but SDS and mercaptoethanol did not inhibit. Monovalent or divalent metal ions such as $MnSO_4$, $CaCl_2$, KCl, and $MgSO_4$ did not inhibited $\beta$-glucosidase activity. $CuSO_4$ and NaCl showed low inhibition, and $ZnSO_4$ inhibited 3.3 times higher than control.

• Journal of the Korean Mathematical Society
• /
• v.16 no.1
• /
• pp.9-16
• /
• 1979

• Journal of the Korean Mathematical Society
• /
• v.27 no.1
• /
• pp.77-86
• /
• 1990

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.14-14
• /
• 2003