• 전자공학회논문지
• /
• 제52권12호
• /
• pp.174-182
• /
• 2015

본 연구에서는 저가형 컬러센서를 이용하여 원거리 인식이 가능한 소형 RGB 센서를 개발하였다. 이 센서의 수광부에는 원거리 인식을 위해 카메라 렌즈를 사용하였으며, 고출력 백색 LED와 반사경이 장착된 렌즈를 조명부에 사용하여 조명의 강도를 높였다. RGB 색상 인식 알고리즘은 학습과정과 실시간 인식과정으로 구성되어 있다. 학습과정에서는 기준색으로 도색된 시편을 이용하여 RGB 색상에 대한 정규화된 기준 데이터를 취득하고, 인식과정에서는 마할라노비스 거리를 이용하여 3색을 분류한다. 개발한 RGB 색상 인식 센서를 부품 분류 시제품에 적용하여 성능을 검증하였다.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.37-51
• /
• 2005

The solution way of color difference in display device is using a device profile recorded with color dimension, color properties of each device and is using sRGB color space. The color matching is better sRGB than RGB color space. The sRGB is independent device color space and based on the monitor characteristice. An accurate characterization of the display device is essential for color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linerizaiton and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to estimate color reproduction using device profile and to explain the propriety of transformation method using variable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.45-48
• /
• 2010

A direct-lit liquid crystal display that does not use color filters is proposed. A backlight unit that employs compartmentalized RGB LED and lenticular-lens arrays is used instead of color filters to direct the RGB LED lights into the RGB subpixels. The color-filterless LED backlight design, simulation, and experiment results are presented.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.29-47
• /
• 2009

Generally, if RGB image is sent to the printer when we print a digital photograph, the printer will convert RGB to CMYK by the inner built-in drive. Because the difference between color domain of RGB and CMYK will cause that change and difference. The most common way to solve the problem is to convert colors by using ICC profile at RIP software or to adapt automatic color converting from the software of the original printer. So we intended to study show which way is most efficient to the digital output and which color mode device is the best based on the printer's own drive in this paper. we tried to observe and check the extended range of color space such as AdobeRGB as well as CMYK and sRGB. Then we made sure which is the suitable color space. Besides, When we convert RGB mode into CMYK mode by utilizing RIP software and adapt the printer's ICC profile made by our selves, we evaluated the output we get and compared the result with extended RGB image. The results are as follows. In case of RGB mode, the printer requests RGB, and that makes the color space more efficient than CMYK's. Converted to CMYK by utilizing RIP software, the chroma is more linearized than the one produced with its' own driver. Compared with sRGB mode's color gamut, AdobeRGB mode's color gamut and CMYK mode's color, CMYK mode's color gamut is the smallest among 3 of them. CMYK mode's color gamut by utilizing RIP software can be changeable. that can be small and narrow or wide and broad. In other words, the volume of color gamut depends on how CMYK is linearized. The color space of sRGB is more advantageous than the one of AdobeRGB in color-reproduction printed. But in the group $-b^*$, the chroma leaves behind in terms of reproduction, In the group of $-a^*$, the chroma is excellent relatively. Visual evaluation of the image, AdobeRGB image has not many reproduction colors. Specially, according to printers' characteristics, Group B of AdobeRGB and sRGB color space is a long way behind In terms of reproduction but Group Y is excellent relatively.

• 한국통신학회논문지
• /
• 제32권5C호
• /
• pp.513-519
• /
• 2007

칼라 코렐로그램은 칼라 히스토그램처럼 픽셀의 칼라 정보만을 고려하지 않고 영상의 픽셀의 공간 정보까지 고려하기 때문에 콘텐츠 기반 영상 검색(CBIR)에서 널리 사용되어 왔다. 칼라 코렐로그램은 하나의 칼라 형태를 사용한다. 그래서 칼라 코렐로그램은 영상 검색 시 같은 영상이라도 크기가 다를 경우 다른 영상으로 인식하는 등 영상의 특징을 구별해내는데 강건하지 않다. 본 논문에서는 RGB와 HSV의 두 가지 칼라 형태를 사용하여 코렐로그램을 함으로써 기존의 알고리즘보다 영상의 특징을 더 잘 구별해내는 알고리즘을 제안하였다. 이 제안된 알고리즘은 대규모 영상 데이터베이스에서 테스트하였고 그 결과 하나의 칼라 형태를 사용한 코렐로그램 알고리즘과 비교하여 검색된 영상의 평균 순위가 5.63 낮아져 제안한 알고리즘이 더 나은 검색 성능을 나타낸다는 것을 보여준다.

• 한국통신학회논문지
• /
• 제34권11C호
• /
• pp.1040-1048
• /
• 2009

본 논문에서는 인물 영상에 대한 새로운 자동 톤 균형 알고리즘을 제안하였다. 일반적인 백색 균형 (White balance) 알고리즘은 무채색 영역 또는 물리적 반사율을 알고 있는 피사체에 대해 RGB 출력 신호의 비율이 동일하도록 보정하는 방법을 사용한다. 본 논문에서는 사진 속 얼굴색을 기준 조명하에서의 피부색 좌표와 일치 되도록 RGB의 채널 이득을 조절한다. 실험을 위해 카메라 이미지 센서의 전달 특성을 분석하고 기준 조명하에서의 평균 얼굴 색도를 측정하여 카메라 출력 RGB을 계산한다. 마지막으로 임의의 조명하에서 촬영된 인물 영상에 대해 얼굴 부분의 RGB 출력 비율이 기준 얼굴색에 대한 비율이 되도록 R 채널과 B 채널의 이득을 조정하여 색도 보정을 했다. 입력 삼자극치 XYZ는 카메라 전달 행렬에 의해 카레라 출력 RGB로부터 계산된다. 그리고 입력 삼자극치 XYZ는 sRGB 전달 행렬을 이용하여 기준 컬러 공간(sRGB)으로 변환된다. RGB 데이터는 감마 보정 후 디스플레이를 위해 8 bit 데이터로 인코딩되어진다. 알고리즘은 맥베스 컬러 차트 (Macbeth color chart)의 light skin color인 평균 얼굴색과 실제로 측정된 다양한 얼굴색의 평균색에 적용되어졌다.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.1049-1054
• /
• 2011

Color is discerned due to the reflectance of object and its hue is determined by the Ratio of RGB spectrum. The aim of this study is to evaluate the Color information using by the optical system in terms of convenience and simplicity. Firstly, the differential Ratio of RGB is evaluated by photodiode Sensor which achieves a high efficiency with quick tranducer output. To extract the information of RGB Ratio, light emitting diode is built in Color sensing system with photodiode. Our proposed method is very economical, simple, and convenient. Our results can be applied to confirm the accurate information of Color in the research environments and commercial purposes. Thus RGB information can be determined subjectively and thus, the inherent characteristic of Color will be revealed precisely and its related features can be resolved in a real time mode.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.11-26
• /
• 2007

In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After the input device underwent a color transformation, a $3\;{\times}\;20\;size$ matrix was used in a linear multiple regression and the scanner's color representation of scanner was better than a digital still camera's color representation. When using the sRGB color space, the original copy and the output copy had a color difference of 11. Therefore it was more efficient to use the linear multiple regression method than using the sRGB color space. After the input device underwent a color transformation, the additivity of the LCD monitor's R, G and B signal value improved and therefore the error in the linear formula transformation decreased. From this change, the LCD monitor with the GOG model applied to the color transformation became better than LCD monitors with other models applied to the color transformation. Also, the color difference varied more than 11 from the original target in CRT and LCD monitors when a sRGB color transformation was done in restricted conditions.