• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.4
• /
• pp.506-517
• /
• 2015

This paper presents a 1.248 Gb/s - 2.918 Gb/s low-power receiver MIPI-DigRF M-PHY with a fully digital frequency detection loop. MIPI-DigRF M-PHY should be operated in a very short training time which is $0.01{\mu}s$ the for HS-G2B mode. Because of this short SYNC pattern, clock and data recovery (CDR) should have extremely fast locking time. Thus, the quarter rate CDR with a fully digital frequency detection loop is proposed to implement a fast phase tracking loop. Also, a low power CDR architecture, deserializer and voltage controlled oscillator (VCO) are proposed to meet the low power requirement of MIPI-DigRF M-PHY. This chip is fabricated using a $0.11{\mu}m$ CMOS process, and the die area is $600{\mu}m{\times}250{\mu}m$. The power consumption of the receiver is 16 mW from the supply voltage of 1.1 V. The measured lock time of the CDR is less than 20 ns. The measured rms and peak jitter are $35.24ps_{p-p}$ and $4.25ps_{rms}$ respectively for HS-G2 mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.394-406
• /
• 2023

In this study, a real-time surveillance system using Internet of Things technology is proposed for vaccine cold chains. This system fully visualizes vaccine transport and storage. It comprises a 4G gateway module, lowpower and low-cost wireless temperature and humidity collection module (WTHCM), cloud service software platform, and phone app. The WTHCM is installed in freezers or truck-mounted cold chain cabinets to collect the temperature and humidity information of the vaccine storage environment. It then transmits the collected data to a gateway module in the radiofrequency_physical layer (RF_PHY). The RF_PHY is an interface for calling the bottom 2.4-GHz transceiver, which can realize a more flexible communication mode. The gateway module can simultaneously receive data from multiple acquisition terminals, process the received data depending on the protocol, and transmit the collated data to the cloud server platform via 4G or Wi-Fi. The cloud server platform primarily provides data storage, chart views, short-message warnings, and other functions. The phone app is designed to help users view and print temperature and humidity data concerning the transportation and storage of vaccines anytime and anywhere. Thus, this system provides a new vaccine management model for ensuring the safety and reliability of vaccines to a greater extent.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.374-379
• /
• 2010

무선통신 환경이 발전하면서 사용자의 위치에 따른 서비스를 제공하는 기술들이 많이 개발되고 있다. 사물의 위치를 파악하는 기술에는 여러 가지가 있지만 GPS를 이용한 차량용 네비게이션이 대표적인 기술이라 할 수 있다. 하지만 GPS는 위성과 통신하는 관계로 실내와 같은 음영지역에서는 사용할 수 없는 단점이 있다. 근래에는 실내에서도 거리측정 및 위치파악이 가능한 RF가 개발되고 있는데, 본 논문에서는 이러한 CSS 변조 방식을 이용하는 RF와 모바일 단말기를 이용해 실내 위치안내와 원격지에서 모니터링이 가능한 서비스를 제안한다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.54-61
• /
• 2012

The WAVE specification, which for the Next-Generation ITS environment is a common title: IEEE 802.11p and IEEE P1609 specifications. These days, there are many activities for researching WAVE specification by release of the IEEE 802.11p specification. The difference between high-speed vehicle environment and the indoor environment, the wireless communication channel mode is that much more severe. Thus, the wireless communication system design, temperature, noise, multipath fading and can degrade the performance of the system points should be fully considered matters of. In this paper, we showed WAVE wireless communication system which based on IEEE 802.11p PHY/MAC design process, and also showed solving process many implementation problems.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.135-136
• /
• 2007

2.45 GHz RF Transceiver composed RF module and Digital module for USN(Ubiquitous Sensor Network) has been implemented in this paper. The proposed RF system is designed based on IEEE 802.15.4-2006 PHY standard which has a frequency range from $2.4{\sim}2.4835GHz$. In this transmitter chain, the output power is controlled form 0 to 30 dBm. In this receiver chain, less than 20 dB of NF was obtained.

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.1-10
• /
• 2022

Traditional centralized radio access network architecture used for 4G is based on Option 8, a functional split between PHY and RF. This option is commonly used with a fronthaul interface based on common public radio interface (CPRI) specifications; however, the increased data rates in 5G make this option impractical because of the fronthaul interface's high bandwidth requirement. Since CPRI specifications have many vendor-specific options, achieving multi-vendor interoperability becomes challenging. Open RAN (O-RAN) Alliance is developing novel open fronthaul interface specifications based on the functional split Option 7-2x, one of the intra-PHY split options, to relax the bandwidth requirement of the fronthaul interface and achieve multi-vendor interoperability. This article provides a brief overview of the various functional split options for 5G fronthaul that have been reported so far and existing fronthaul technologies. Further, the technological trends in the 5G open fronthaul interface is discussed, focusing on the O-RAN Alliance specifications under standardization.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.397-406
• /
• 2014

Radio frequency (RF) jamming is a denial of service attack targeted at wireless networks. In resource-hungry scenarios with constant traffic demand, jamming can create connectivity problems and seriously affect communication. Therefore, the vulnerabilities of wireless networks must be studied. In this study, we investigate a particular type of RF jamming that exploits the semantics of physical (PHY) and medium access control (MAC) layer protocols. This can be extended to any wireless communication network whose protocol characteristics and operating frequencies are known to the attacker. We propose two efficient jamming techniques: A low-data-rate random jamming and a shot-noise based protocol-aware RF jamming. Both techniques use shot-noise pulses to disrupt ongoing transmission ensuring they are energy efficient, and they significantly reduce the detection probability of the jammer. Further, we derived the tight upper bound on the duration and the number of shot-noise pulses for Wi-Fi, GSM, and WiMax networks. The proposed model takes consider the channel access mechanism employed at the MAC layer, data transmission rate, PHY/MAC layer modulation and channel coding schemes. Moreover, we analyze the effect of different packet sizes on the proposed jamming methodologies. The proposed jamming attack models have been experimentally evaluated for 802.11b networks on an actual testbed environment by transmitting data packets of varying sizes. The achieved results clearly demonstrate a considerable increase in the overall jamming efficiency of the proposed protocol-aware jammer in terms of packet delivery ratio, energy expenditure and detection probabilities over contemporary jamming methods provided in the literature.

• Information and Communications Magazine
• /
• v.30 no.9
• /
• pp.78-84
• /
• 2013

최근 4세대 이동통신은 기술/경제적인 이유로 클라우드 기지국 (또는 C-RAN: Cloud Radio Access Network) 구조를 택하는 추세이다. C-RAN은 기존 일체형 기지국에서의 MAC/PHY 기능을 담당하는 BBU(Base Band Unit)와 RF신호 송수신 만을 담당하는 RRH(Remote Radio Head)로 분리된 기지국 구조를 가지며, RRH의 무선 송수신 신호는 중앙의 BBU에 집중되어 처리된다. 본고에서는 BBU와 RRH로 분리되어 설치/운용되는 C-RAN의 구조와 기지국 가상화 개념을 소개하며, 향후 이동통신시스템에서의 기술동향과 관련하여 C-RAN에서 발생할 수 있는 이슈들을 살펴본다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.175-181
• /
• 2015

In this paper, we develop a 2.4GHz ISM band wireless communication platform prototype based on embedded linux which support can be u-Hospital service. The developed system is available connecting between ARM920T processor board and FPGA board and linking IEEE 802.11b PHY board, AD/DA(10Bit) and RF(2.4GHz) board for wireless access. It is also can be utilized for the embedded system design with IEEE 802.11b/g Access Point(Option: IEEE 802.11a/b/g) test due to the Embedded Linux. Also, the developed system is possible to test and verify the radio access technology, Modem(OFDM etc) and IP(Intellectual Property) circuit. And make the most use of the system, we search for a expansion to that home and mobile healthcare, wellness service application.