• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38C권1호
• /
• pp.1-11
• /
• 2013

Reducing the energy that consumed by tag is a key requirement for the wider acceptance of the active RFID systems that use battery constrained tags. When the reader is not interrogating, the active RFID standard protocols try to reduce energy consumption of tags by using sleep mode. On sleep mode tags is active by receiving a specific signals from reader, until tag receive a sleep mode command from the reader, a tag waste energy for remaining in RX mode. Overhearing is a state of a tag in which it wastes energy for maintaining active RX state while there is no frame destined to it. According to our analysis, the amount of energy consumed by a tag due to overhearing is several time larger than that consumed by the effective communication. We propose RANO(Reservation Aloha for No Overhearing) that is designed to inform a tag of its effective communication intervals to eliminate overhearing problem in active RFID communication. The performance of the proposed protocol was evaluated through the real world by changing the number of tags and size of data. The result of an experiment, the proposed protocol performed saving about 22 times less than the standard protocol did.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권1호
• /
• pp.425-430
• /
• 2017

RFID is a technology that uses radio frequency to read information in tags attached to objects or people. Because it reads the information without contact when tracking the location using tags in a RFID system, there can be errors between the actual position and measured position. In this paper, three methods (the method of radiation pattern, the method of the median value, and the method using both the radiation pattern and median value) are proposed to identify the location of objects or people using the RFID technique. The location identification system based on RFID was constructed and tags were arranged in a square pattern. The real location and experimentally predicted location of an object containing a reader were compared to confirm the error. Instead of the existing papers that obtained the approximately location of a reader by calculating the center of gravity of all tags read by that reader, in this study, the predicted location was obtained by the median value and the radiation pattern. This study validated which method was the most efficient among the three methods proposed in this paper through the data of the read tags. As a result, the method of the median value had the smallest error among those assessed.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.24-28
• /
• 2008

In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. Among the existing anti-collision algorithms, static framed slot allocation algorithm is very simple. But when the number of tags is variable, its performance degrades because of the fixed frame size. This paper proposes an optimal frame size allocation scheme that determines the frame size. The proposed scheme is based on the number of collision slots at every frame. According to the simulation results, the tag identification time is faster that of SFSA.

• Proceedings of the Safety Management and Science Conference
• /
• 대한안전경영과학회 2007년도 추계학술대회
• /
• pp.323-328
• /
• 2007

This paper introduces radio frequency identification(RFID) information technologies for item management such as application interface of data protocol, data encoding rules and logical memory functions for data protocol, and, unique identification for RF tags. This study presents reference architecture and definition of parameters to be standardized, various parameters for air intreface communications, and, application requirements profiles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.253-259
• /
• 2008

RFID is a generic term for technologies which use RF waves to identify, track, or categorize any object. A radio frequency identification (RFID) reader recognizes objects through wireless communications with RFID tags. Tag collision arbitration for passive tags is a significant issue for fast tag identification due to communication over a shared wireless channel. One of the research areas in RFID system is a tag anti-collision protocol. In this paper, various anti-collision protocols are discussed. The pros and cons of different anti-collision protocols are compared with each other and their performance is analyzed and the better performance anti-collision protocol is suggested.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.31-35
• /
• 2007

RFID is going to be the core technology for contact-less information transfer means in the era of ubiquitous. Up until recent days, the RFID didn't fit to be used in outdoor environment due to the fact that it was developed for logistics which does not require stability in outdoor. But recently, requests for the RFID to be used in the outdoor environment have increased, and this laid the foundation for the development of outdoor tags, including MetalTag, which can be utilized in many different ways. In this research, to provide information on the control point using the RFID at the sight, RFID tags, which can place at the control point, and PDA based system were developed.

• Journal of Construction Engineering and Project Management
• /
• 제4권2호
• /
• pp.1-7
• /
• 2014

Radio Frequency Identification (RFID) has been applied to the construction industry for improving the efficiency of material and process management. Most RFID-related studies have focused on building or plant construction. The application of RFID has been limited in pipeline construction projects where materials are stored and stacked across a large construction site. This paper investigates practical issues in pipeline construction, improves the read rates of RFID tags, and tests their utility by putting them into practice. This paper demonstrates the benefits that may be expected with the use of improved RFID tags and the development of an automated pipeline construction management system. As a result, pipeline construction management time decreased by 28 hours per month compared to the conventional method. Cost decreased by about 26%.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제54권4호
• /
• pp.217-223
• /
• 2005

In this paper, we have proposed a secure dynamic ID allocation protocol using mutual authentication on the RFID tag. Currently, there are many security protocols focused on the low-price RFID tag. The conventional low-price tags have limitation of computing power and rewritability of memory. The proposed secure dynamic ID allocation protocol targets to the high-performance RFID tags which have more powerful performance than conventional low-price tag by allocating a dynamic ID to RFID using mutual authentication based on symmetric encryption algorithm. This protocol can be used as a partial solution for ID tracing and forgery.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제45권6호
• /
• pp.204-212
• /
• 2008

Active RFID tags are currently used in harbor transportation; they are attached to cargo containers for sea transportation. They are designed to be able to be identified by RFID readers installed at ports in many countries. The international standard ISO/IEC 18047-7 regarding RFID conformance test methods suggests the use of air interface evaluation between an RFID reader and a tag. However, the test method suggested by the international standard is intended to detect a radio signal over only a very short period. Outcomes were uncertain, making it difficult to evaluate the system accurately. This paper proposes a new evaluation method by incorporating a 'self-running test mode' environment into the RFID tags in order to reduce the test time and increase testing accuracy. We found that the application of the suggested method to actual tags improves measurement time and uncertainty over that obtained using existing methods.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제18권1호
• /
• pp.67-75
• /
• 2008

RFID(Radio Frequency Identification) system is an automated identification system that consists of tags and readers. They communicate with each other by RF signal. As a reader can identify many tags in contactless manner using RF signal, RFID system is expected to do a new technology to substitute a bar-code system. But RFID system creates new threats to the security and privacy of individuals, Because tags and readers communicate with each other in insecure channel using RF signal. So many people are trying to study various manners to solve privacy problems against attacks, but it is difficult to apply to RFID system based on low-cost Gen2. Therefore, We will propose a new encryption scheme using matrix based on Gen2 in RFID system in paper, and We will analyze our encryption scheme in view of the security and efficiency through a simulation and investigate application environments to use our encryption scheme.