• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.1
• /
• pp.203-229
• /
• 2018

This study examined current status and futurity of libraries based on the survey of librarians awareness in the era of the $4^{th}$ Industrial Revolution and sought to find effective response strategies for future changes. For this purpose, this study reviewed research issues against the $4^{th}$ Industrial Revolution based on preceding researches in our library area and other fields. The awareness survey was conducted of librarians of several types including national libraries and public libraries. The results are as follows: First, librarians were interested in the $4^{th}$ Industrial Revolution, but they thought that new technologies are poorly adopted in their libraries. Second, librarians were most frequently using Desktop PCs, mobile phones, RFID tags, and QR codes for library services. Third, librarians were required intelligent-information services because of their effectiveness, but their libraries did not provide them for users. Fourth, librarians expected that the $4^{th}$ Industrial Revolution brings positive influences to libraries' future. On the other hands, they also concerned about their job losses. Fifth, librarians agreed with necessity of new technologies of the $4^{th}$ Industrial Revolution and they especially wanted educations and training related with technologies. Also, technical supports for online services and simply repeated works are required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.470-470
• /
• 2013

Recently, active materials such as amorphous silicon (a-Si), poly crystalline silicon (poly-Si), transition metal oxide semiconductors (TMO), and organic semiconductors have been demonstrated for flexible electronics. In order to apply flexible devices on the polymer substrates, all layers should require the characteristic of flexibility as well as the low temperature process. Especially, pentacene thin film transistors (TFTs) have been investigated for probable use in low-cost, large-area, flexible electronic applications such as radio frequency identification (RFID) tags, smart cards, display backplane driver circuits, and sensors. Since pentacene TFTs were studied, their electrical characteristics with varying single variable such as strain, humidity, and temperature have been reported by various groups, which must preferentially be performed in the flexible electronics. For example, the channel mobility of pentacene organic TFTs mainly led to change in device performance under mechanical deformation. While some electrical characteristics like carrier mobility and concentration of organic TFTs were significantly changed at the different temperature. However, there is no study concerning multivariable. Devices actually worked in many different kinds of the environment such as thermal, light, mechanical bending, humidity and various gases. For commercialization, not fewer than two variables of mechanism analysis have to be investigated. Analyzing the phenomenon of shifted characteristics under the change of multivariable may be able to be the importance with developing improved dielectric and encapsulation layer materials. In this study, we have fabricated flexible pentacene TFTs on polymer substrates and observed electrical characteristics of pentacene TFTs exposed to tensile and compressive strains at the different values of temperature like room temperature (RT), 40, 50, $60^{\circ}C$. Effects of bending and heating on the device performance of pentacene TFT will be discussed in detail.

• Journal of Fashion Business
• /
• v.20 no.1
• /
• pp.142-156
• /
• 2016

Convergence of IT devices and fashion is enabling the industry to take fully different approaches in various areas including product planning, fabric selecting, distributing, and marketing. At the same time, it also transforms the definition of clothing itself. Convergence of IT technologies in the realm of fashion and textiles industries can create a powerful synergy through connection digital devices, such as mobile phone. In this context, this study attempts to suggest how IT technology can be efficiently harnessed through the usage of mobile devices in the planning stage of fashion materials, where the initial production plan of a clothing item is mapped out. This study ultimately aims to enhance the effectiveness of databases on fashion material information by using mobile devices to utilize NFC, an RFID technology having as much revolutionary power as Internet - which can be the convergence between IT and fashion across the software dimensions. To pursue this research, data on fashion material information regarding 200 woven fabric specimens were provided by textile companies. The information includes elements such as its composition, weight, width, yarn, density and sales report. These pieces of information were organized into a database. Drawing on this data, Android-based applications that allow smart phones to read off fabric information from NFC tags were developed for this study using two methods. The system works as follows: 1. NFC tag stickers are attached onto the hangers where 200 fabric samples are hanging. 2. The NFC tag stickers are tagged, or read off from a smart phone that support NFC functions. 3. Upon tagging, the Smart phone swiftly displays all information available on its screen - not only the aforementioned six elements, but also the image of the clothing item from the fabric in its finalized product form, and the video of the model wearing the item - for convenient view. The method harbors immense potential for the fashion industry in general, and will also be useful in those fields inside the industry that harness NFC technology.

• KIISE Transactions on Computing Practices
• /
• v.22 no.6
• /
• pp.268-277
• /
• 2016

IoT (Internet of Things) technologies have largely contributed to our smart living environment. The smart parking system is one of the prominent services that IoT supports. To identify the parked vehicles, the previous parking system use special identifying devices, the RFID tags carried by the users, and the high quality camera to recognize the vehicle license numbers. However, the previous methods cause cost inefficiency and unfriendly usages. To address these problems, we propose a smart parking system based on ultrasonic sensors and Bluetooth communication. The proposed system decides the available slots by using the sensor motes located in the parking spaces. Also it recognizes the location of the parked vehicle using Bluetooth RSSI between a Smartphone and the sensor motes. In addition, based on these converging technologies, it can support the parked routes of vehicles for users. To evaluate the implemented smart parking system, we applied the RSSI transform equations and the recognition rate for parked vehicles. As a result, the accurate rate of transformed distances could be measured.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1032-1040
• /
• 2010

This paper describes implementation of electonic seal (E-Seal) of a container based on ISO 18185 standard and development of monitoring systems checking E-Seal device and cargo states in the container for secure transportation from departure to destination. For lack of definition on confidentiality support in ISO 18185-4 standard, it is vulnerable to security attack such as sniffing. To cope with this, we developed encryption/decryption functions implementing RC5 and AES-128 standards and compared their performance. Experimental results showed that RC5 outperformed AES-128 in terms of time delay. In addition, RC5 had an advantage under the condition of large sized messages as well as CPUs with low performance. However, the portion of encryption/decryption processing time was less than 1 percent of response time including communication delay between E-Seal tags and readers. Hence, the performance difference between RC5 and AES-128 standards was trivial, which revealed that both specifications were allowable in developed systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.331-339
• /
• 2016

This paper developed a home wellness robot platform to perform the roles in basic health care and life care in an aging society. A robotic platform and a sensory platform were implemented for an indoor wellness service. In the robotic platform, the precise mobility and the dexterous manipulation are not only developed in a symbiotic service-robot, but they also ensure the robot architecture of human friendliness. The mobile robot was made in the agile system, which consists of Omni-wheels. The manipulator was made in the anthropomorphic system to carry out dexterous handwork. In the sensing platform, RF tags and stereo camera were used for self and target localization. They were processed independently and cooperatively for accurate position and posture. The wellness robot platform was integrated in a real-time system. Finally, its good performance was confirmed through live indoor tests for health and life care.

• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1059-1071
• /
• 2008

Users in ubiquitous computing environment can easily access and use a multitude of devices and services anywhere and anytime. The key technology to realize this scenario is the method to intuitively provide proper user interfaces for each device and service. Previous attempts simply provided a designated user interface for each device and service or provided an abstract user interface to control common functions of different services. To select a target appliance, either user directly specified the target device or depended on sensors such as RFID tags and readers limiting the applicable scenarios. In this paper, we present UbiController which uniquely uses camera on the mobile device to recognize markers of appliances to acquire user interface for controlling task. UbiController aims to provide automatic discovery of multiple services in the smart home environment, support traditional GUI and novel camera-based recognition method as well as intuitive interaction methods for users. In this paper, we show experiments on the performance of UbiController's discovery and recognition methods and user feedback on interaction methods from a user study.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.165-178
• /
• 2011

A gigantic ship is constructed by assembling various types of ship blocks, each block being made by cutting and piecing the steel-plates together. The steel-plate piling process as the initial stage of ship construction sorts and manages the steel-plates according to the ship blocks that the steel-plates are used to make. The steel-plate piling process poses some problems such as process delay due to piling errors, safety vulnerability due to the handling of extra heavy-weight objects, and the uncertainty of work plan due to lack of information management in the pile spaces. We constructed a steel-plate piling process system based on the context-aware computing to resolve such problems. We built simulation system that can simulate the piling process and then established a smart space within the system by using tags, sensors and a real-time location system in order to collect context information. Workers receive an appropriate or intelligent service from the system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1444-1451
• /
• 2009

This paper first proposes diverse C determining models in the Q algorithm which is proposed in the EPCglobal C1 Gen 2 standard and then compares and analyzes its performance. EPCglobal C1 Gen 2 standard proposes the slot-count (Q) selection algorithm for multiple tag identification environment, but there is no such definition for the C value which modifies the Q value depending on collision or no reply. During the tag anti-collision process, the Q algorithm adds C to the Q when there is a collision and reduces the Q by C when there is no reply. The modified Q value updates new slot-counts for tags which determines the tag identification speed, so the C value is an important factor. However, many researches only intend to increase the tag identification speed by proposing a new method or modifying the Q algorithm without any research about the C value. This paper suggests diverse C models which satisfies the EPCglobal C1 Gen 2 and analyzes their performance in the multi tag identification environment. The result of this paper can be used as an index for future researches on EPCglobal C1 Gen 2 C models and multiple tag identification performance.