• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1071-1076
• /
• 2009

A wearable embroidery 'ㅂ' character shape UHF RFID tag antenna has been designed using conductive electro-thread. After testing characteristics of various electro-threads, the embroidery tag, with a T-matching structure, has been designed on a cloth with 200D(denier) electro-thread which performs electrically better. The embroidery tag on a piece of fabric or clothes made with the flexible electro-thread is a wearable tag and possible to be recognized by an RFID system. The conductivity of different deniers of electro-threads has been measured. The measured conductivity has been used for simulation and fabrication to have accurate simulation results. To verify the characteristics of the tag antenna, the return loss and reading range of the fabricated embroidery electro-thread UHF RFID tag antenna have been tested. The reading range is approximately 1.52 m.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.267-270
• /
• 2005

An RFID patch antenna for metallic object has been designed. The effects of variation of distance between the tag antenna and ground of the antenna have been studied. Various dielectric constants, thickness, permittivity, width of transmission line and length of transmission line have been used to design the better tag antenna for metallic object.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1943-1949
• /
• 2010

In this paper, we developed a RFID tag antenna using one-sheet inlay pattern which consist of two different frequencies in one layer. The antenna in one-sheet inlay RFID tag does not use different kind RFID antennas in a card but implement 13.56MHz and 900MHz RFID tag antennas in one sheet. In order to evaluate the usability of proposed method, we configured test equipments and designed 6 different patterns and test the recognition distance of each pattern. Among the one-sheet inlay RFID tag antenna designs, the pattern no.5 has good performance with recognition distance of 5.34m at 900MHz and 3.5m at 13.56MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.157-161
• /
• 2017

This paper introduce UHF miniaturized RFID tag antenna which is embedded on the seal-bolt or plastic bolt for automobile plate. To detect the illegal and un-registered car, the illegal automobile detection system has been developed using the seal-bolt UHF RIF tag antenna. The diameter of seal-bolt UHF tag is about 24mm, almost the same size as 100 Won coin. The simulated and measured reflection coefficient are compared, and the reading range patten is also measured. If seal-bolt tag is embedded on car plate, police can get information of automobile and detect illegal vehicles easily with the illegal automobile detection system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.209-214
• /
• 2019

This paper presents the design of a 920 MHz ultra-high frequency(UHF) band radio frequency identification(RFID) conductive fabric tag antenna. The resistance values of four different conductive fabrics are measured, and the conductivities of the fabrics are calculated. The fabric with the best conductivity is selected, and the best conductivity of the fabric is used to simulate the fabric tag antenna design. The fabric UHF RFID tag antenna with a T-Matching structure and name-tag size of $80{\times}40mm$ is simulated and designed. The simulated and measured results are compared, and a laundry test is performed. The reading range of the fabric tag antenna is about 2 m. This fabric tag can be easily applied to an entrance control system as it can be attached to other fabrics and cloths.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.279-284
• /
• 2005

We investigated the impedance matching characteristics of UHF-band RFID tag antenna and tag chip for increased reading range. A voltage multiplier designed using 0.4 $\mu$m zero-$V_T$ MOSFET showed that DC output voltage of about 2 V can be obtained using standard CMOS process. The input impedance of the voltage multiplier was examined to achieve impedance matching to the RFID tag antenna using analytical and numerical approaches. The input impedance of the voltage multiplier could be varied in a wide range by selecting the size of MOSFET and the number of multiplying stages, and thus can be impedance matched to a tag antenna in presence of other tag circuit blocks. A meander line inductively-coupled RFID tag antenna operating at UHF band also shows the feasibility of impedance matching to tile RFID tag chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.909-914
• /
• 2012

The paper introduces the RFID location based Tree Management System (TMS) using UHF RFID tag and GPS. The bolt shape tag has been developed since the wood material has high dielectric constant. Since the characteristics and impedance of tag antenna can be changed by the material next to the tag, the plastic bolt shape tag antenna has to be carefully designed with consideration of the high dielectric constant of the wood material. The RFID TMS system has been utilized with the bolt shape tag antenna and GPS. The TMS system uses and links Google map to locate the location of the trees. Therefore, this system allow us to manage the trees economically and efficiently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.971-978
• /
• 2010

In this paper, we propose a compact multiple meander RFID tag antenna with broadband characteristic. The proposed tag antenna has been designed using the multiple meander form to effectively minimize the U-shaped half wavelength dipole antenna as the radiator part. The commercial tag chip is attached to the upper center of the rectangular shaped feed for impedance matching. The size of the antenna is $20{\times}19.7\;mm^2$ and VSWR<5.8 bandwidth is 855~964 MHz which covers the world UHF RFID bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.168-172
• /
• 2012

An UHF RFID tag is designed and fabricated using the national code in a bar-code with conductive ink. The bar-code sample was taken from a general bar-code from a general box. The conductivity of the conductive ink was measured, and the measured conductivity was used for the simulation tool to design the printed bar-code shape tag antenna. The tag antenna was fabricated using T-matching to reduce the size of the tag, and the bar-code tag antenna is recognized by both a general bar-code reader and an UHF RFID reader. The input reflection coefficient characteristic, the reading range pattern and the reading rate of the tag antenna are measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2008

A wearable T-matching dipole UHF RFID tag antenna has been designed using conductive electro-thread. The conductivity of the electro-thread has been measured depending on the number of twisted thread. The measured conductivity has been used for simulation to have accurate simulation results. The flexible electro-thread or fabric has been used for fabricating the antenna instead of using copper tape since the electro-thread is more flexible and wearable than copper tape. The return loss and reading range of the fabricated electro-thread UHF RFID tag antennas have been tested. The reading range is approximately 2.4 m.