• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1992-1994
• /
• 2005

In this study, Bragg reflector was formed as tungsten(W) and $SiO_2$ deposited by RF magnetron sputtering according to variable conditions of RF power and working pressure to apply to the SMR type FBAR device, one of the next generation mobile communication devices. The micro-structural properties such as a crystal orientation, roughness and micro- structure were measured by XRD, AFM and SEM and the best condition of Bragg reflector was elicited with analyzing that results of the thin films about each conditions. Finally, FBAR device was fabricated with applying the Bragg reflector was formed on the best condition and measured the resonance properties and compared other research and considered it.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.169-170
• /
• 2000

The conventional AC PDP has a relatively low efficiency which is close to 1.5 lm/W. If the AC sustain period is replaced by the RF sustain period, due to oscillating and low electric field, almost 60% of the supplied energy is spent by Xe excitation [1]. The efficiency of RF PDP can be $4{\sim}5$ times higher than that of AC PDP. In this paper, we will present the RF PDP that is a new type of PDP. A new display method in PDP using RF pulses is suggested and applied on a 4-inch-diagonal Panel (hereinafter 4" panel). Even though there were many researches in RF discharge, there was not enough research for display application. Now we propose the RF PDP that is a new display field and we will expect to do more research in this field.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.781-783
• /
• 2010

전북대학교 고온 플라즈마 응용 연구 센터 구축사업단은 교육과학기술부 기초연구사업 중 고가연구장비 구축사업을 통하여 고부가가치 재료 연구 및 시험생산이 가능한 소재공정용 60kW 와 200kW ICP(RF) 플라즈마 발생장치를 구축하고 있다. 나노분말소재의 합성과 플라즈마 용사 코팅이 가능한 대형 ICP(RF) 플라즈마 장치 구축을 통하여 차세대 전자 부품 소재의 개발 및 고온 플라즈마 기술의 산업화에 이바지 하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.612-614
• /
• 1993

Sputtering requires a way to bombard the target with sufficient momentum. Positive ions are the most convenient source since their energy and momentum can be controlled by applying a potential to the target. Although many types of discharges have been used for sputtering, magnetrons are now the most widely used because of the high ion current densities. Namely, plasma near the target electrode is confined by magnetic field using permanent magnet, so that the collision probability is increased. It is important to develop RF magnetron sputtering system which has many excellent merits compared with conventional methods. Our study aims to develop 1 kW RF source(13.56 MHz, TR type) and to accumulate the design and construction technology of RF magnetron sputter-deposition system. We developed 1 kW RF sputtering system to deposit thin film. These films are deposited by this RF source matched by auto-matching system using primarily argon gas. Target of Au, Ni, Al, and $SiO_2$ was well deposited on the argon pressure of 5-10 mTorr.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.172-180
• /
• 2003

CMOS RF IC에서 중요한 문제가 되는 입력 노드에의 기생 커패시턴스 추가 문제를 줄이기 위해, 2차원 소자 시뮬레이션 결과 및 그에 따른 분석을 기반으로, 표준 CMOS 공정에서 쉽게 제작 가능한 pnpn 싸이리스터 구조의 ESD 보호용 소자를 제안한다. 제안된 소자의 DC 항복특성을 일반적으로 사용되고 있는 보호용 NMOS 트랜지스터 경우와 비교 분석하여 제안된 소자를 사용하였을 경우의 이점을 입증한다. 시뮬레이션을 통해 제안된 소자에 의한 특성 향상을 보이고 이와 관련된 미케니즘들에 대해 설명한다. 또한 제안된 소자의 최적 구조를 정의하기 위해 소자구조에 따른 특성변화를 조사한다. ESD 보호용으로 제안된 소자를 사용할 경우 추가되는 기생 커패시턴스의 감소 정도를 보이기 위해 AC 시뮬레이션 결과도 소개한다. 본 논문의 분석 결과는, CMOS RF IC에서 ESD 보호용으로 제안된 소자를 사용할 경우 NMOS 트랜지스터를 사용할 경우와 대비, 동일한 ESD 강도를 유지하면서 입력노드에 추가되는 커패시턴스의 양을 1/40 정도로 줄일 수 있는 가능성을 보여준다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권4호
• /
• pp.299-304
• /
• 2017

A wireless passive sensor network is a network consisting of sink nodes, sensor nodes, and radio frequency (RF) sources, where an RF source transfers energy to sensor nodes by radiating RF waves, and a sensor node transmits data by consuming the received energy. Against theoretical expectations, a wireless passive sensor network suffers from many practical difficulties: scarcity of energy, non-simultaneity of energy reception and data transmission, and inefficiency in allocating time resources. Perceiving such difficulties, we propose a simple contending-type medium access control (MAC) scheme for many sensor nodes to deliver packets to a sink node. Then, we derive an approximate expression for the network-wide throughput attained by the proposed MAC scheme. Also, we present an approximate expression for the optimal partition, which maximizes the saturated network-wide throughput. Numerical examples confirm that each of the approximate expressions yields a highly precise value for network-wide throughput and finds an exactly optimal partition.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.142-146
• /
• 2006

A novel internal-type linear inductive antenna, which we refer to as a double comb-type antenna, was developed for a large-area plasma source with substrate size of $880\;mm{\times}660\;mm$ ($4^{th}$ generation glass size). In this study, effect of plasma confinement by applying multi-polar magnetic field was investigated. High density plasmas of the order of $3.18{\times}10^{11}\;cm^{-3}$ could be obtained with a pressure of 15 mTorr Ar at an inductive power of 5000 W with good plasma stability. This plasma density is higher than that obtained for the conventional double comb-type antenna, possibly due to the plasma confinement, low rf voltage, resulting in high power transfer efficiency. Also, due to the remarkable reduction in the antenna rf voltage and length, a plasma uniformity of less than 3% could be obtained within a substrate area of $880\;mm{\times}660\;mm$ as rf power increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.144-145
• /
• 2006

ZnO is a promising material to make high efficiency violet or blue light emitting diodes (LEDs) for its large binding energy (60meV) and big bandgap. But the high quality p-type conduction of ZnO is a dilemma to achieve LEDs with it. In present study, we presented a reliable method to prepare ZnO thin films on (100)silicon substrates by RF magnetron sputtering in the mixture ambient of $N_2$ and $O_2$, accompanying with low pressure annealing in the sputtering chamber in $O_2$ at $600^{\circ}C$ and $800^{\circ}C$ respectively. X-ray diffraction and Hail effect with Van der Paul method were performed to test ZnO films. Seeback effect was also carried out to identify carrier types in ZnO films and showed the N-doped ZnO film annealed at $800^{\circ}C$ had achieved p-type conduction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.91-91
• /
• 2008

ZnO는 넓은 밴드갭(3.37eV)과 큰 엑시톤(exciton) 결합에너지(60meV) 를 가지는 II-VI족 산합물 반도체로, 상온에서도 높은 재결합 효율이 기대되는 엑시톤 전이가 가능하여 자발적인 발광특성 및 레이저 발진을 위한 낮은 임계전압을 보여주는 장점을 가지고 있다. 이러한 특성을 이용해, 최근 ZnO 박막을 이용한 LED 및 LD 소자 제작에 대한 연구가 국내외적으로 매우 활발하게 이루어지고 있다. 하지만 아직까지 p-type ZnO는 전기적 특성 및 재현성 문제를 극복하지 못하고 있기 때문에 ZnO를 이용한 동종접합구조를 이용한 소자제작은 어려움이 따른다. 이런 문제점을 극복하기 위해 최근 p-type 물질을 ZnO와 결정구조 및 특성이 거의 유사한 GaN를 많이 이용하고 있다. 또한 RF 스퍼터링법을 이용해 박막을 성장할 경우 성장조건 및 불순물 도핑 등에 따라 성장되는 n-type ZnO의 전기적 특성 및 밴드갭을 조절할 수 있다. 본 연구에서는 RF 스퍼터링법을 이용해 p-type GaN 기판위에 n-type ZnO를 성장한 이종접합구조를 이용해 발광 다이오드를 제작하고 그에 대한 특성 평가를 하였다. 이때 성장시킨 n-type ZnO는 여러 가지 성장 변수 및 불순물 도핑으로 전기전 특성 변화 및 밴드갭 조절을 통해 발광특성 변화에 대해 특성 평가를 하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.24-27
• /
• 2009

N-doped ZnO thin films were deposited on n-type Si(100) and homo-buffer layer, and undoped ZnO thin film was also deposited on homo-buffer layer by RF magnetron sputtering method. After deposition, all films were in-situ annealed at $800^{\circ}C$ for 5 minutes in ambient of $O_2$ with pressure of 10Torr. X -ray diffraction shows that the homo-buffer layer is beneficial to the crystalline of N-doped ZnO thin films and all films have preferable c-axis orientation. Atomic force microscopy shows that undoped ZnO thin film grown on homo-buffer layer has an evident improvement of smoothness compared with N-dope ZnO thin films. Hall-effect measurements show that all ZnO films annealed at $800^{\circ}C$ possess p-type conductivities. The undoped ZnO film has the highest carrier concentration of $1.145{\times}10^{17}cm{-3}$. The photoluminescence spectra show the emissions related to FE, DAP and many defects such as $V_{Zn}$, $Zn_O$, $O_i$ and $O_{Zn}$. The p-type defects ($O_i$, $V_{Zn}$, and $O_{Zn}$) are dominant. The undoped ZnO thin film has a better p-type conductivity compared with N-doped ZnO thin film.