• 제목/요약/키워드: RF-Laser

검색결과 167건 처리시간 0.043초

레이저 추적기를 이용한 저고도 비행체 추적 기법 연구 (A Study on the Low Elevation Target Tracking under Multipath Conditions Using Laser Tracking System)

  • 유승오
    • 한국전자파학회논문지
    • /
    • 제26권6호
    • /
    • pp.572-580
    • /
    • 2015
  • 저고도 비행체는 다중 경로 간섭의 영향으로 인해 계측 레이더의 RF 스킨 추적 시 고각 방향의 오차 신호 증가로 안정적인 추적 데이터를 획득할 수 없다. 이 한계를 극복하고자 본 논문에서는 레이저 추적기를 이용한 저고도 비행체 추적 기법을 제안하였다. 짧은 펄스폭과 좁은 빔 폭을 갖는 레이저의 특성을 이용하여 각도 해상도를 높이는 방법으로 다중 경로 간섭의 영향을 줄일 수 있다. 지면에 설치된 통합형 교정기와 해수면의 표적선을 대상으로 RF 스킨 추적, 비콘 추적, 레이저 추적 결과의 불확도 및 오차 신호 분석을 통해 다중경로 간섭 조건에서 레이저 추적이 RF 스킨 추적에 비해 추적 성능이 뛰어남을 확인하였다.

기체레이저의 여기를 위한 용량결합고주파(ccrf) 방전시스템 (Capacitively Coupled Radio Frequency Discharge System for Excitation of Gas Laser)

  • 최상태
    • 조명전기설비학회논문지
    • /
    • 제20권1호
    • /
    • pp.19-26
    • /
    • 2006
  • 용량결합고주파(ccrf)방전은 홀로우음극방전이나, 직류방전에 비해서 방전관의 구조가 간단하고 균질한 플라즈마를 발생시키는 장점을 가지고 있다. 본 논문에서는 ccrf-방전을 기체레이저의 여기에 적용하기 위한 목표를 가지고 방전시스템을 선계, 제작하여 연속운전의 균질한 방전을 실현하였다. 13.56[MHz]의 rf-전력을 방전 내부로 효율적으로 결합하기 위해서 내부직경 5[mm]의 레이저방전관에 특수하게 제작된 rf-전극을 사용하였다. 또한 방전관의 임피던스가 rf-발생기의 풀력저항 50[$\Omega$]에 정합을 이루는 임피던스 정합회로를 개발하였다.

이득 스위칭 반도체 레이저에서 동작 파라메터에 대한 출력 펄스 폭의 의존성 (Dependence of pulse width on the operating parameters in a gain-switched semiconductor laser)

  • 이상훈;명승일;이명우;서동선
    • 전자공학회논문지D
    • /
    • 제35D권4호
    • /
    • pp.101-108
    • /
    • 1998
  • We examine experimentally the dependence of output width on DC bias, RF power, and RF frequency in a gain-switched semiconductor laser. The optimum short pulses are obtained around threshold DC bias. The DC bias to generatoe shorter pulses decreases the RF power increases, whereas it increases to above threshold as the RF freqnecy increases. The pulse width becomes less sensitive to the variations of the DC bias, as the RF bias, or frquency increases.

  • PDF

2-종 모드 레이저를 이용한 고분해능 헤터로다인 간섭계 (A High-Resolution Heterodyne Interferometer using Beat Frequency between Two-Axial Modes of a HeNe Laser)

  • 김민석;김승우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.214-219
    • /
    • 1997
  • We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

  • PDF

CDMA RF 신호 전송용 광 SCM 트래시버에서 레이저 다이오드의 비선형 왜곡 보상 (Compensation of Laser Diode Nonlinearity in the Optical SCM System for CDMA RF Signal Transmission)

  • 최영우;유진태;이길성;박진우
    • 한국통신학회논문지
    • /
    • 제25권12A호
    • /
    • pp.1766-1773
    • /
    • 2000
  • 이동통신망에서 RF 신호를 송수신하는 기지국(base station)과 이동 통신 신호의 교환 전송을 담당하는 중앙국(central station)을 광섬유로 연결하여 구성하는 SCM (Subcarrier Multiplexing) 전송 시스템은 미래의 음성, 영상, 데이터 서비스 등의 이동통신 시스템에 적용할 수 있기 때문에 최근 관심사가 커지고 있다. 이동통신망을 위한 SCM 광전송 시스템의 유용성에도 불구하고, CDMA RF 신호를 전송하는 과정에서 많은 물리적인 제약이 있다. 특히, 많은 가입자의 CDMA RF 신호가 하나의 레이저 다이오드(LD: Laser Diode)를 구동시킬 때, RF 신호의 합이 레이저 다이오드의 선형영역을 벗어나면 클리핑(clipping)이나 비선형 왜곡이 발생하여 시스템의 성능을 저하시키게 된다. 본 논문에서는 CDMA RF 신호의 SCM 광전송 성능분석을 통해 레이저 다이오드에 의해 발생하는 비선형 왜곡의 영향을 분석하고, 분석 결과로부터 레이저 다이오드에 의한 비선형 효과를 최소화 할 수 있는 비선형 왜곡 보상구조를 제안하였다. 또한 제안된 레이저 다이오드 비선형 보상기의 성능을 시뮬레이션과 실험을 통해 얻어진 BER로부터 측정하였다.

  • PDF

CD-ROM 드라이브의 대물렌즈 입자오염이 Laser Diode의 Power와 Photo Diode의 RF Signal에 미치는 영향 (Effect of Particle Contamination on Objective Lens in a CD-ROM Drive on Laser Diode Power and Photo Diode RF Signal)

  • 배양일;황정호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1429-1434
    • /
    • 2003
  • A number of dust particles are intruded into ODD(Optical disk drive) due to the flow caused by disk rotation and are adhered to a lens or disk surface. The space between the disk and the lens is being reduced. Someone indicates the problems of this drive that are relatively small data storing capacity and slow access time. In recent, the problems of this optical disk drive mentioned above are being solved by adding the speed of the disk's revolution, making the actuator high-speed or light, and making the beam spot size smaller than making the space narrow between disk and lens. These particle contamination affects seriously RF Signal, readout signal in an ODD. Especially, the affected parts by a particle contamination in an ODD's readout signal are objective lens and media.

  • PDF

고주파 여기식 슬랩형 도파관 CO2 레이저 (The radio frequency excited slab waveguide CO2 laser)

  • 김규식;이영우;우삼용;최종운
    • 한국광학회지
    • /
    • 제14권4호
    • /
    • pp.406-412
    • /
    • 2003
  • 고주파 여기 방식의 슬랩 도파관 $CO_2$ 레이저를 제작하고 그 특성을 조사하였다. 레이저 이득을 얻기 위한 고주파 방전구간의 크기는 2${\times}$40${\times}$400mm이고, 레이저 공진기는 볼록거울과 오목거울을 사용하여 positive branch형태의 불안정 공진기를 사용하였다. 고주파 여기 주파수는 123 MHz를 사용하였고, 가스의 혼합 비율은 $CO_2$:$N_2$:He를 각각 1:1:3으로 사용하였다. 공진기의 가스 압력이 40 ton,고주파 입력파워 900 W에서 70.8 W의 출력을 얻었으며, 이때 레이저의 효율은 9.2%이다.

Negative branch의 불안정 공진기를 갖는 슬랩형 도파관 $CO_2$ 레이저 (The Slab Waveguide $CO_2$ Laser with Unstable Resonator of Negative Branch)

  • 김규식;우삼용;이영우;최종운
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권12호
    • /
    • pp.586-591
    • /
    • 2003
  • We have developed the radio frequency excited slab waveguide $CO_2$ laser, The dimension of active area is $2{\times}40{\times}400$ mm to get a laser gain. Two pieces of concave mirror are used to make the unstable resonator of negative branch. The radio frequency is 123 MHz and RF input power is from 100 to 900 W. The laser gas is set to a pressure of 10 ∼ 60 torr and the mixing ration is $CO_2$:$N_2$:He=1:1:3. The laser output power of 50.9 W was obtained with laser power to RF power efficiency of 6.5 %.

엑시머 레이저 어닐링을 이용하여 플라스틱 기판에 형성한 다결정 실리콘 박막의 특성 (Polycrystalline silicon thin film fabricated on plastic substrates by excimer laser annealing)

  • 조세현;이인규;김영훈;문대규;한정인
    • 한국진공학회지
    • /
    • 제13권1호
    • /
    • pp.29-33
    • /
    • 2004
  • 본 논문에서는 RF 마그네트론 스퍼터링법으로 비정질 실리콘을 증착하여 진공분위기에서 엑시머 레이저 어닐링을 이용하여 플라스틱 기판위에 극저온 다결정 실리콘 박막(<$150^{\circ}C$)을 형성하였다. 비정질 실리콘 박막은 $120^{\circ}C$에서 Ar/He 혼합가스로 증착하였으며, Rutherford Backscattering Spectrometry로 측정한 박막내 아르곤 함량은 2% 이하였다. 에너지 밀도 320mJ/$\textrm{cm}^2$일 때 다결정 실리콘의 결정화도는 62%, Root-Mean-Square roughness는 267$\AA$를 나타내었다. 엑시머 레이저 결정화 후 결정립의 크기는 50nm에서 100nm 정도를 나타내었다.

CD-ROM 드라이브의 대물렌즈 입자오염이 레이저 다이오드 파워와 포토 다이오드 RF 신호에 미치는 영향 (Effect of Particle Contamination of Objective Lens in a CD-ROM Drive on Laser Diode Power and Photo Diode RE Signal)

  • 배양일;이재호;황정호
    • 대한기계학회논문집B
    • /
    • 제28권1호
    • /
    • pp.66-71
    • /
    • 2004
  • Airborne contaminant particles are intruded into optical disk drive(ODD) due to the flow caused by disk rotation and can be adhered to objective lens, which causes read/write errors. Such a phenomenon can be a serious problem for high-density storage devices. The purpose of this paper is to understand the effect of particle contamination of objective lens in a CD-ROM drive on laser diode power and photo diode RF signal. The measurements of laser power and readout RF signal were carried out by using a laser power meter and a time interval analyzer, respectively. The parameters for estimating a readout-signal' distortion were its jitter and amplitude. Alumina(Al$_2$O$_3$) particles were used as test dust particles. The results show that the failure for data access happened as the degree of lens contamination was greater than 20%.