• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.68-73
• /
• 2009

This paper presents an easily modifiable structure of a serial peripheral interface (SPI) that is suitable for efficient testing of CMOS RF integrated circuits. The proposed SPI Is designed so that the address size and the accompanying software can be easily adjusted and modified according to the requirements and complexity of RF IC's under development. The hardware architecture and software algorithm to achieve the flexibility are described. The proposed SPI is fabricated in $0.13{\mu}m$ CMOS and successfully verified experimentally with a 2.7GHz fractional-N delta-sigma frequency synthesizer as a device under test.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.716-722
• /
• 2012

In this paper, we analyzed the RF interactions between WWAN antennas and an LCD driving module inside the cover of a notebook computer, and discussed reduction method of RF coupling. In order to simulate the RF noise source from the LCD driving module, a multi-band antenna was designed and used with a simplified notebook model to test the RF coupling phenomena. We verified that the RF noise coupling is enhanced at certain frequencies due to cavity structure formed inside the notebook computer. Also, we showed that conductive barrier walls, which are inserted inside the notebook, could be effective in reducing RF coupling.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.129-133
• /
• 2001

In this paper, hermetic sealing was studied fur wafer level packaging of the MEMS devices. With the flip-chip bonding method, this B-stage epoxy sealing will be profit to MEMS device sealing and further more RF-MEMS device sealing. B-stage epoxy can be cured 2-step and hermetic sealing can be obtained. After defining $500{\mu}{\textrm}{m}$-width seal-lines on the glass cap substrate by screen printing, it was pre-baked at $90^{\circ}C$ for about 30 minutes. It was then aligned and bonded with device substrate followed by post-baked at $175^{\circ}C$ for about 30 minutes. By using this 2-step baking characteristic, the width and the height of the seal-line were maintained during the sealing process. The height of the seal-line was controlled within $\pm0.6${\mu}{\textrm}{m}$ and the strength was measured to about 20MPa by pull test. The leak rate of the epoxy was about $10^7$ cc/sec from the leak test.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1699-1701
• /
• 1999

We prepared diamond thin films on WC-Co substrate in $H_2-CH_4-O_2$ gas mixture using 13.56MHz RF PACVD. Scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to analyze the nature of thin film. and Rockwell test to analyze the adhesion between thin film and substrate. The good diamond quality and adhesion was appeared with cemented tungsten carbide substrate treated with oxygen plasma.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.7-10
• /
• 2008

In our study, Monitoring RF System in real-time on leakage of gas cylinder is developed. The system is consisted of Pressure Transmitting part, Main Controller and Operating program. The pressure data of gas cylinder are transmitted to the modem of main controller part by RF module of Pressure Transmitting part and the data received through the modem are recorded in real-time and showed the situation of gas cylinder on the PC monitor. Through the test on the case of the artificial pressure-reduction, the detecting performance. of the developed system is conformed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.401-410
• /
• 2017

In this work, we show that the excessive lattice heating problem due to parasitic pnp transistor action in the diode electrostatic discharge (ESD) protection device in the diode input protection circuit, which is favorably used in CMOS RF ICs, can be solved by adopting a symmetrical cathode structure. To explain how the recipe works, we construct an equivalent circuit for input human-body model (HBM) test environment of a CMOS chip equipped with the diode protection circuit, and execute mixed-mode transient simulations utilizing a 2-dimensional device simulator. We attempt an in-depth comparison study by varying device structures to suggest valuable design guidelines in designing the protection diodes connected to the $V_{DD}$ and $V_{SS}$ buses. Even though this work is based on mixed-mode simulations utilizing device and circuit simulators, the analysis given in this work clearly explain the mechanism involved, which cannot be done by measurements.

• The Korean Journal of Ceramics
• /
• v.4 no.1
• /
• pp.9-14
• /
• 1998

Diamond-like carbon(DLC) films were deposited on buffer-layered ZnS substrates by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) method. Ge and GeC buffer layera were used between DLC and ZnS substrates to promote the adhesion of DLC on ZnS substrates. Ge buffer layers were sputter deposited by RF magnetron sputtering and $GeC^1$ buffer layers were deposited by same method except using acetylene reactive gas. The relatinship between film properties and deposition conditions was investigated using gas pressure, RF power and dc bias voltage as PECVD parameters. The hardness of DLC films were measured by micro Vickers hardness test and the adhesion of DLC films on buffer-layered ZnS substrates were studied by Sebastian V stud pull tester. The optical properties of DLC films on butter-layered ZnS substrates were characterized by ellipsometer and FTIR spectroscopy.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.23-30
• /
• 2007

Kevlar was chemically surface modified with resorcinol-formaldehyde(RF) prepolymer and VP rubber latex for application to high strength tirecords. RF prepolymer was easily obtained by polymerization at room temperature in the presence of a base catalyst. The mechanical and thermal properties of Kevlar were not significantly changed during surface treated under various conditions. The change of adhesion with rubber were investigated through H-test method. Maximum increase of adhesion force between rubber and Kevlar was obtained up to 40% than that of untreated one when the fiber was soaked in RFL dipping solution and thermally treated at $170^{\circ}C$ for 3 - 5min.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.550-555
• /
• 2022

Perilla plant is a special crop that is used as oilseed and food in Korea. Root lesion nematodes have caused great damage to perilla plants, so for effective management of root lesion nematodes, it is necessary to understand their ecology in perilla. In this study, we investigated the effect of temperature in the development of Pratylenchus penetrans (Pp) and Pratylenchus vulnus (Pv) when the nematodes infected the perilla plant. To estimate the effect of temperature, we assessed the reproduction factor (RF); final population/initial population(Pf/Pi) of these two nematode species. We used perilla plants as inoculated hosts and investigated the density of nematodes at 10 weeks after inoculation. As a result, the RF of Pp was highest at 20℃ (0.41 (1st test), 2.2 (2nd test)) followed by 25, 30, and 15℃. The RF of Pv was highest at 30℃(9.84 (1st test), 31.39 (2nd test)), followed by 25, 20, and 15℃. Comparing the RF by temperature between Pp and Pv, Pv was higher than Pp at all temperatures used in the test. This study showed the optimal development temperature of Pp was 20-25℃ and Pv was 30℃, respectively.

• The Journal of Internal Korean Medicine
• /
• v.41 no.4
• /
• pp.624-643
• /
• 2020

Objectives: The aim of this study was to analyze the correlation between Ryodoraku and two pattern-identification questionnaires in patients with Burning Mouth Syndrome (BMS). Methods: The study participants were 30 patients with BMS who visited the Oral Diseases Clinic of Kyung Hee Oriental Medicine Hospital from June to November, 2019. The Ryodoraku test and two pattern-identification questionnaires were administered to all patients. Measurements included the average Ryodoraku score, which is called the Total Average (TA), and each score on the Ryodoraku point scale. The degree of Yin-deficiency, Qi-stagnation, and pain were assessed with the Yin-deficiency Questionnaire (YDQ), Qi-stagnation Questionnaire (QSQ), and Visual Analogue Scale (VAS), respectively. Results: The average TA score was 29.90. The LF5 (p=0.013) and RF5 (p=0.016) scores were lower than the TA scores, and the RH5 (p=0.020) and RH6 (p=0.006) scores were higher than the TA scores. A negative correlation was detected between the YDQ scores and the LH1 (r=-0.366, p=0.046), LH2 (r=-0.507, p=0.004), LH3 (r=-0.374, p=0.042), RH1 (r=-0.361, p=0.050), RH2 (r=-0.403, p=0.027) points. The LF5 (p=0.050) and RF2 (p=0.048) scores were lower in the patients with Qi-stagnation patients than without Qi-stagnation. Conclusions: Our results suggest that low TA and Ryodoraku scores on LF5 and RF5 and high Ryodoraku scores on RH5 and RH6 could be quantitative indicators for the diagnosis of BMS. The LH1, LH2, LH3, RH1, RH2, LF5, and RF2 scores could also be an indicators for diagnosis of Yin-deficiency and Qi-stagnation in patients with BMS.