• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.225-230
• /
• 2013

This paper presents a novel shunt radio frequency microelectromechanical system switch on a quartz substrate with stiff ribs around the membrane. The buckling effects in the switch membrane and stiction problem are the primary concerns with RF MEMS switches. These effects can be reduced by the proposed design approach due to the stiffness of the ribs around the membrane. A lower mass of the beam and a reduction in the squeeze film damping is achieved due to the slots and holes in the membrane, which further aid in attaining high switching speeds. The proposed switch is optimized to operate in the k-band, which results in a high isolation of -40 dB and low insertion loss of -0.047 dB at 21 GHz, with a low actuation voltage of only 14.6 V needed for the operation the switch. The membrane does not bend with this membrane design approach. Finite element modeling is used to analyze the stress and pull-in voltage.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.96-99
• /
• 2008

This paper describes a $0.13-{\mu}m$ CMOS RF switch for $3{\sim}5$ GHz UWB band(mode 1). It can improve isolation characteristics between ports by using deep n-well RF devices while their source and body terminals are separated. From the measurement results, the proposed T/R switch is comparative to the on-wafer probing measurement results of the series-shunt T/R switches. When the proposed T/R switch operates as Tx mode, measured insertion loss from Tx to output port is less than 1.5 dB and isolation between Tx and Rx is more than 27 dB for $3{\sim}5$ GHz. Return loss for the Tx port is more than -10 dB and input P1dB is +10 dBm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.809-812
• /
• 2002

This paper presents the structures for a CPW shunt RF switch using MEMS(Micro Electro Mechanical System). Recent development in MEMS technology has made the design and fabrication of micro-mechanical switches as new switching elements. The micro-mechanical switches have low insertion loss, negligible power consumption, and good isolation compared to semiconductor switches. The fabricated structure shows an insertion loss of 2dB at 20GHz When a bias voltages of 12V is apply.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.584-597
• /
• 2011

본 논문에서는 WIN Semiconductors사의 0.5 ${\mu}m$ PHEMT 공정을 이용하여 GSM/EGSM/DCS/PCS 4중 대역을 위한 저손실, 고전력의 RF SP6T 스위치 칩을 설계, 제작 및 측정하였다. 스위치 특성을 개선시킬 수 있는 최적의 구조를 위해서 series와 series-shunt 구조를 혼용하였고, 칩 크기를 줄이기 위해서 수신단에 공통 트랜지스터 구조를 사용하였다. 또한, 시스템에 사용되는 ON, OFF 상태의 입력 전력을 고려하여 트랜지스터의 게이트 크기와 스택(stack) 수를 결정하였다. 마지막으로 피드 포워드(feed forward) 캐패시터, shunt 캐패시터 그리고 shunt 트랜지스터의 기생 인덕턴스 공진 기법을 적용하여 격리도 및 전력 특성을 개선하였다. 제작된 스위치 칩의 크기는 $1.2{\times}1.5\;mm^2$이며, S 파라미터 측정 결과 삽입 손실은 0.5~1.2 dB, 격리도는 28~36 dB를 보였다. 전력 특성으로는 4 W의 입력 전력에 대해서도 삽입 손실 및 격리도의 특성 변화가 없었으며, 75 dBc 이상의 2차 및 3차 고조파 억제 특성이 확보되었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권3호
• /
• pp.164-168
• /
• 2016

A low insertion-loss, high-isolation switch based on single pole double throw (SPDT) for a 2.4GHz Bluetooth low-energy transceiver is presented in this paper. In order to increase isolation, the body floating technique is implemented. Based on characteristics whereby the ratio of the sizes of the shunt and the series transistors significantly affect the performance of the switches, the device sizes are optimized. A simple matching network is also designed to enhance the insertion loss. Thus, the SPDT switch has high isolation and low insertion loss without increasing the complexity of the circuit. The proposed SPDT is designed and simulated in a complementary metal-oxide semiconductor 65nm process. The switch has a $530{\mu}m{\times}270{\mu}m$ area and achieves 0.9dB, 1.78dB insertion loss and 40dB, 41dB isolation of transmission, reception modes, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.166-176
• /
• 2007

Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1507_1508
• /
• 2009

This study proposes a composite right/left-handed transmission line (CRLH-TL) that permits switching between the right-handed (RH) and left-handed (LH) modes using single crystalline silicon (SCS) RF MEMS switches. It is possible to change modes from the RH to LH mode, or vice versa, by controlling the admittance of capacitors and the impedance of inductors using switch operations. The proposed switchable CRLH-TL consists of SCS RF MEMS switches, metal-insulator-metal (MIM) capacitors and shunt inductors. At 8 GHz, the fabricated device shows a phase response of $87^{\circ}$ with an insertion loss of 2.7 dB in the LH mode, and a phase response of $-77^{\circ}$ with an insertion loss of 0.56 dB in the RH mode.