• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.563-566
• /
• 1997

In this paper, several bandwidth sampling methods were compared in which contains "multi-order sampling", which was proposed or envelope detections in RF ultrasonic signals by a computer simulation and on experiment quadrature sampling method. The second-order sampling method were compared with it. As a conclusion, a multi-order sampling method, especially 5th order sampling method showed quite good envelope detection property. This means that more economical and quite good performance digital beamforming system can be built by adopting this new bandwidth sampling method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.98-104
• /
• 2013

This paper presents a WBAN UWB receiver circuit for RTLS(real time location system) and wireless data communication. The UWB receiver is designed to OOK modulation for energy detection. The UWB receiver is designed for sub-sampling techniques using 4bit ADC and DLL.The proposed UWB receiver is designed in $0.18{\mu}m$ CMOS and consumes 61mA with a 1.8V supply voltage. The UWB receiver achieves a sensitivity of -85.7 dBm, a RF front-end gain of 42.1 dB, a noise figure of 3.88 dB and maximum sensing range of 4 meter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.67-73
• /
• 2015

This paper presents a fully integrated 3 - 5 GHz IR-UWB(impulse radio ultra-wide band) RFIC for Location based system. The receiver architecture adopts the energy detection method and for high speed sampling, the equivalent time sampling technique using the integrated DLL(delay locked loop) and 4 bit ADC. The digitally synthesized UWB impulse generator with low power consumption is also designed. The designed IR-UWB RFIC is implemented on $0.18{\mu}m$ CMOS technology. The receiver's sensitivity is -85.7 dBm and the current consumption of receiver and transmitter is 32 mA and 25.5 mA respectively at 1.8 V supply.

• ETRI Journal
• /
• v.46 no.2
• /
• pp.238-249
• /
• 2024

Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.141-151
• /
• 2022

Soil seed banks as natural storage of plant seeds play an important role in the maintenance and regeneration of watershed. Natural regeneration potential of the soil seed bank of Land use types (LUTs) in Ogun River watershed (ORW) was investigated. ORW was stratified using proportionate sampling technique into Guinea Savannah (GS), Rainforest (RF) and Swamp Forest (SF) Ecological Zones (EZs). Three LUTs: Natural Forest (NF), Disturbed Forest (DF) and Farmland (FL) were purposively selected in GS: GSNF, GSDF, GSFL; RF: RFNF, RFDF, RFFL and SF: SFNF, SFDF, SFFL, respectively. Systematic line transects was used in the laying of the sample plots. Sample plots of 25 m×25 m were established in alternate positions. Ten 1 m×1 m quadrats were randomly laid for soil core sampling from previously randomly selected ten plots. The core samples (10) were pooled per plot in each LUT and placed in individual trays. Ten trays with sterilized soil were used as control. The trays were watered regularly and checked for seedlings emergence fortnightly for 18 months. The experimental design used was 3×3 factorial experiments. ANOVA, Diversity index (H') and Similarity index (SI) were used to analyze the data. There was significant difference in seedling emergence among ecological zones and land use types (p<0.05). A total of 4,400 seedlings emerged from the soil samples. All species were distributed among 32 families. FL in the RF had the highest number of germinated seeds (705±37.33 seedlings) followed by DF in the RF (701±49.6 seedlings). The lowest emergence was in NF of the SF (199±28.41 seedlings). DF in the RF had highest number of species (34) distributed among 22 families. Emergence from soil seed bank of NF in ORW was generally with more of tree species than herbs that were predominant in FL and DF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.913-921
• /
• 2005

A complex bandpass sampling technique can provide a more flexible architecture for designing a software- defined radio(SDR) system, because it has several advantageous features of larger sampling range and lower minimum sampling frequency than a real bandpass sampling method. In spite of the potential advantages of the complex bandpass sampling, solid investigation for the direct downconversion of multiple signals by the complex sampling theory has not been reported yet. Thus, we propose in this paper a novel scheme for the downconversion of multiple signals using the complex bandpass sampling, and develop the formulae related to the complex bandpass sampling for practical usage, such as the valid sampling range, the intermediate frequency (If), and the minimum sampling frequency of the downconversion of multiple RE signals. Such derived formulae are verified from simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.507-511
• /
• 2010

Digital Radio Frequency Memory (below, DRFM) performs RF signal data store, delay and re-transmission. DRFM is wildly used as core module of Jammer, EW simulator, Target Echo Generator etc. This paper suggests a hardware design of DRFM which is composed RF section(RF Input/Output Module, Local Oscillator Module) and Digital section(ADC module, memory, DAC module), and confirm the validity of the propose by the test result.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.297-300
• /
• 1988

The ultrasound Doppler effect is used for measuring the velocity of the bloodflow in an artry. Because of the range information, the pulsed doppler system is most commonly used. In this paper, we propose a new pulsed doppler system which uses a quadrature sampling method in R.F. range in order to detect the bloodflow direction and to simplify the compexity of hardware. The pulsed doppler system using quadrature sampling method in R.F. range eliminates In-phase, Quadrature phase channel balancing problem at demodulator. In addition, the improved pulsed Doppler system shows the possibility of serial processing.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.170-176
• /
• 2017

In this paper, we propose an underwater localization scheme through the fusion of an inertial navigation system (INS) and the received signal strength (RSS) of electromagnetic (EM) wave sensors to guarantee precise localization performance with high sampling rates. In this localization scheme, the INS predicts the pose of the unmanned underwater vehicle (UUV) by dead reckoning at every step, and the RF sensors corrects the UUV position functions using the Earth-fixed reference when the UUV is located in underwater wireless sensor networks (UWSN). The localization scheme and state modeling were conducted in the extended Kalman filter framework, and UUV localization experiments were conducted in a basin environment. The scheme achieved reliable localization accuracy during long-term navigation, demonstrating the feasibility of exploiting EM wave attenuation as Earth-fixed reference sensors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.220-223
• /
• 2012

Generally, SAW device, which uses Time Domain Sampling, requires high speed AD converter because SAW device (TDS) needs high sampling speed as much as its high data speed. However, the high price of AD converter discourages makers from using it. On the other hand, SAW device, which uses Frequency Domain Sampling, does not required high speed AD converter because SAW device (FDS) does not need high sampling speed. It is very efficient in price comparison to its performance because high processing speed of SAW device (FDS) can be implemented using low price Embedded Systems. The purpose of the thesis is to solve the issues above by designing and realizing SAW device (FDS) using SAW sensor for TDS.