• ETRI Journal
• /
• v.35 no.4
• /
• pp.578-586
• /
• 2013

Using a sub-terahertz (sub-THz) wave generated using a photonics-based technology, a high-speed wireless link operating at up to 10 Gbps is designed and demonstrated for realization of seamless connectivity between wireless and wired networks. The sub-THz region is focused upon because of the possibility to obtain sufficient bandwidth without interference with the allocated RF bands. To verify the high-speed wireless link, such dynamic characteristics as the eye diagrams and bit error rate (BER) are measured at up to 10 Gbps for non-return-to-zero pseudorandom binary sequence $2^{31}-1$ data. From the measurement results, a receiver sensitivity of -23.5 dBm at $BER=10^{-12}$ is observed without any error corrections when the link distance between the transmitter and receiver is 3 m. Consequently, we hope that our design and experiment results will be helpful in implementing a high-speed wireless link using a sub-THz wave.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.98-106
• /
• 2009

This paper proposes an optical wireless transfer agent method which realizes the continuous and swift data transfer of optical wireless terminals in optical wireless networks. The unguided wireless channel generally shows frequent link disconnections and propagation delays due to weak wireless links. Specially speaking, optical wireless channels have more vulnerable links and roaming propagation delays relative to the weakness of the previous RF channels due to their low signal connectivity and small geographic coverage. Conventional optical wireless network protocols did not consider any fault models about physical link faults. Consequently, they have shown data transfer inefficiency for both data link control and physical wireless link control. To overcome these optical wireless environmental problems, this paper suggests a new wireless access point (or base station) agent system, which provides wireless or mobile clients with previous link layer protocols compensated.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.121-125
• /
• 2007

In this paper, a planar active retrodirective four-element array with subharmonic phase conjugation mixers based on anti-parallel diode pairs (APDPs) is designed, and its application in the auto-tracking duplex communication link is presented. As compared to previous phase conjugation mixers using twice RF frequency for LO frequency, the proposed conjugation mixers need only half RF frequency so that it can be easily applied for millimeter-wave applications. The proposed architecture, which conventionally performs the function of the transmission of an incident signal back in the direction of its source, is modified in order to include a receive function. Experimental verification of these architectures is performed at 1GHz and the results from the prototypes are compared with a theoretical model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1235-1240
• /
• 2008

In this paper, we presented an active RFID system in 2.45GHz range including LNA, Mixer and gain block. And in this work, a link budget model for RFID applications are proposed. We describe the detailed design and implementation of our system. Our components in RFID system has features such as low Noise Figure, reliable energy budget, and standard compliance with ISO 18000-4. Our receiver is effective for development and evaluation of prototype applications because of the flexibility of the design hardware. So, our platform will be suitable for versatile item management applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.254-260
• /
• 2011

Telemetry link is dynamic communication link that antenna gain and polarization are varying with the movement of the airplane. In this paper we calculated the antenna gain, polarization mismatch using the flight trajectory, motion of the airplane and 3D antenna pattern. And we modeled the multipath environment to the 2-Ray spherical earth reflection geometry, estimated the received signal strength when the narrow beam antenna received the RF signal transmitted from the airplane. Also we performed the flight test and after comparing measured value with the estimated value, we confirmed to almost coincide with each other.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.96-102
• /
• 2009

We investigate the characteristics of RJ (random jitter) in an analog fiber-optic link employing a MZM (Mach-Zehnder modulator) and an EDFA (Erbium-doped fiber amplifier). RJ has been measured using two methods, one of which derived from the noise spectrum of a RF spectrum analyzer and the other from the histogram data of a sampling oscilloscope. If the optical power and/or the RF power input to the MZM increase, RJ decreases due to the output signal power increase. For the optical link without EDFA, the minimum RJ is about 1 ps at an RF power of 10 dBm and an optical power of 8 dBm measured using the noise spectrum method. For the optical link with an EDFA, RJ decreases toward a jitter floor as the EDFA gain increases. If the gain increases further, it has been observed that RJ increases from the minimum. If the EDFA gain is fixed, RJ is smaller for the case of larger optical input power. As the EDFA gain increases, RJ reduction rate becomes greater for the case of lower optical input power.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.167-178
• /
• 2003

The design on the Telemetry Ground System for launch of KSLV(Korea Space Launch Vehicle) in the korean Space center has been conducted in this study. For the optimized system design, first of all, the system deployment plan reflecting the topographic and geographic environments of the space center and launch vehicle characteristics has been developed. The RF link budget analysis for the maximum tracking range, requirement for receiving subsystem including antenna subsystem, requirement for data processing subsystem are also analyzed based on the On-Board Telemetry characteristics and launch vehicle parameters. Based on those analysis, telemetry ground system containing tracking/receiving subsystem, recording subsystem and data processing subsystem, timing subsystem, calibration subsystem and monitoring and control subsystem are designed. Futhermore, the analysis for the maximum permissible data latency and communication protocol between each telemetry station and control center are conducted and the entire system is designed so that the major telemetry parameters selected to the best quality are provided in real time to the control center(RCC, RSC) for the launch mission operation.