• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.481-484
• /
• 2002

In recent, the contactless IC card is widely used in traffic, access control system and so forth. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process contactless protocol for implementation contactless IC card. And the hardware module consists of specific digital logic circuits that analyze digital signal from analog circuit and then generate data & status signal for CPU, and that convert the data from CPU into digital signal for analog circuit.

• Bulletin of the Korean Space Science Society
• /
• 2006.04a
• /
• pp.104-104
• /
• 2006

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.657-661
• /
• 2003

In this paper, we designed a portable digital pressure algometer which not only can measure the pain level objectively and quantitatively, but also is able to do RF communication. This system consists of pressure sensor for pain measurement, analog signal analysis, digital hardware based on PIC16C73B, RF communication and display. To evaluate the performance of the developed system, we measured pressure threshold using commercial analog PA(Pressure Algometer) and the proposed system, and then evaluated the correlation and confidence. Using linear regression analysis, standard deviation of 0.1731 and R-square value of 99.3% were obtained. In conclusion, the above results showed good performance and its usability in measuring the pain clinically.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.37-45
• /
• 2016

In this paper, design and implementation issues for a network-oriented RF emitter localization system with array antenna are discussed. For hardware, the problem of array mismatch and RF/IF channel mismatch are introduced and the calibration schemes for solving those problems are also provided. For software, it is explained how to overcome the drawback of conventional MUltiple Signal Identification and Classification (MUSIC) algorithm in a point of identifying the number of received signals and problems such as Data Association Problem and Ghost Node Problem in regard to multiple emitter localization are presented with some approaches for getting around those problems. Finally, for implementation, a criterion for arranging each of sensors and a requirement for alignment of array antenna' orientation are also given.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.60-65
• /
• 2006

Recently, various ubiquitous networking services are developed and implemented for easy living. In general, new ubiquitous networking services require the new infrastructure including equipments and devices. However, it is difficult to replace existing infrastructure and devices with new ones in the home or office because of cost and maintenance problems. In this paper, we developed small-size web based RF wireless communication systems for sensor network applications. The designed RF systems are implemented using commercial system on a chip (SoC) on existing infrastructure and devices. The developed systems are tested for light control and temperature sensing and they are applied to sensor network training courses for students and engineer as well as various practical applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2164-2170
• /
• 2010

Digital Radio Frequency Memory, ( as DRFM ), is a device with the ability to restore output to the input RF signal in the required time after storing the incoming RF signals. Therefore DRFM is widely used in Jammer, EW Simulator, Target Echo Generator, and so on. This paper proposes its hardware implementation composed with the high frequency part and the digital processing part consisting of RF input/output module and local oscillator module. It is also proposed the replicated signal generation method which is consisted of the Analog-Digital conversion in the form of pulsed RF signal quantization, and FPGA to save and produce the playback signal, and RF signals to produce a Digital-Analog Conversion in the digital processing unit. This proposed scheme applied to test board and confirmed the validity of the proposed scheme through the test results obtained by the simulated input signals.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.199-205
• /
• 2016

We present a novel schematic using a 3-dB coupler to transmit radiofrequency (RF) power to two receivers selectively. Whereas previous multiple receiver supporting schemes used hardware-switched methods, our scheme uses a soft power-allocating method, which has the advantage of variable power allocation in real time to each receiver. Using our scheme, we can split the charging area and focus the RF power on the targeted areas. We present our soft power-allocating method in three main points. First, we propose a new power distribution hardware structure using a FPGA (field-programmable gate array) and a 3-dB coupler. It can reconfigure the transmitting power to two receivers selectively using accurate FPGA-controlled signals with the aid of software. Second, we propose a power control method in our platform. We can variably control the total power of transmitter using the DC bias of the drain input of the amplifier. Third, we provide the possibility of expansion in multiple systems by extending these two wireless power transfer systems. We believe that this method is a new approach to controlling power amplifier output softly to support multiple receivers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.131-137
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, the principle of digital to radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• The KIPS Transactions:PartA
• /
• v.10A no.3
• /
• pp.255-260
• /
• 2003

In recent, as a typical example of RFID, the contactless IC card is widely used in traffic, access control system and so forth. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process embedded contactless protocol for implementation contactless IC card. And the hardware module consists of analog circuits and specific digital logic circuits. This paper also describes more effective design method of contactless IC card, which method separates into analog circuit parts, digital logic circuit part, and software parts according to the role of the design parts.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.674-682
• /
• 2014

Radio Frequency Test Set (RFTS) is essential to verify Telemetry, Command & Ranging (TC&R) RF subsystem of both Low Earth Orbit (LEO) and Geostationary Earth Orbit (GEO) satellite during Assembly Integration & Test (AI&T). The existing RFTS was specialized for each project and needed to be modified for each new satellite. The new design enables RFTS to be used in various projects. The hardware and software was designed considering this and therefore it could be directly used in other projects within a similar test period without modification or inconvenience. It will be also easily controlled, modified, and managed through the extension in modularization according to each function and the use of COTS (commercial on-the-self) and this will improve system reliability. A more reliable RF test measurement is also provided in this new RFTS by using an accurate reference clock signal.