• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.25-28
• /
• 2021

In this paper, we studied smart phone RF wireless charging with 5.8-GHz microwave wireless power receiver. The dc output of the receiver connected to super capacitor and DC-DC converter for charging a smart phone. This configuration stably supplies 5V and current for charging it. Studies show that the more receivers are used at close range, the higher the received voltage values and the larger the capacity of the super capacitor, the longer the charging time. The present 5.8-GHz 1W wireless power transmission system is not enough for charging a smartphone mainly due to the lack of current of the receiver.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.329-332
• /
• 2002

In this paper a common design method fur RF receivers of different CDMA standards is introduced. The method adopted a new equation, receiver noise equation, for the analysis of each standard. The test conditions for RF receivers in four different CDMA standards, CDMA cellular, PCS, WCDMA, and cdma2000 are analyzed based on the receiver noise equation. With the result of the analysis, the specifications fer RF receivers of different CDMA standards are derived.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.81-85
• /
• 2003

The Bi-directional Wireless Capsule endoscope con sists of CMOS Image sensor, FPGA, LED, Battery, DC to DC Converter, Transmitter, Receiver and Antennas. The RF transmitter at 1.2GHz range is designed and fabricated with 10 mm(diameter)x1.6 mm(thickness) dimension considering the maximum permission exposure(MPE), system size, power consumption, linearity and modulation method. The fabricated RF receiver at 400MHz range can demodulate the external signals so as to control the behavior of CMOS image sensor. four LEDs and Transmitter.

• 한국항공우주학회지
• /
• 제39권2호
• /
• pp.178-182
• /
• 2011

Dubaisat-1 저궤도 위성을 위한 FSK 수신기 RF 블록이 개발되었다. 수신기는 위성 명령을 위한 상향링크 채널에 주파수 편이 보상을 위한 도플러 추적 기능을 가지고 있다. 수신기는 LNA, 주파수 하향기 그리고 중간주파수 모듈로 구성되어 있다. 중간주파수 모듈은 입력신호에 대한 추종 및 고정을 위한 도플러 추적회로를 가지고 있다. 수신기는 무게, 전력소모, 추적속도 및 BER 등의 Dubaisat-1 요구사항을 만족한다.

• Journal of electromagnetic engineering and science
• /
• 제10권1호
• /
• pp.25-27
• /
• 2010

This paper presents a gain and phase mismatch calibration technique for an image-reject RF receiver. The gain mismatch is calibrated by directly measuring the output signal amplitudes of two signal paths. The phase mismatch is calibrated by measuring the output amplitude of the final IF output at the image band. The calibration of the gain and phase mismatch is performed at power-up, and the normal operation of the RF receiver does not interfere with the mismatch calibration circuit. To verify the proposed technique, a 2.4-GHz Weaver image-reject receiver with the gain and phase mismatch calibration circuit is implemented in a 0.18-${\mu}m$ CMOS technology. The overall receiver achieves a voltage gain of 45 dB and a noise figure of 4.8 dB. The image rejection ratio(IRR) is improved from 31 dB to 59.76 dB even with 1 dB and $5^{\circ}$ mismatch in gain and phase, respectively.

• ETRI Journal
• /
• 제32권2호
• /
• pp.214-221
• /
• 2010

Radio frequency (RF) subsampling can be used by radio receivers to directly down-convert and digitize RF signals. A goal of a cognitive radio/software defined ratio (CR/SDR) receiver design is to place the analog-to-digital converter (ADC) as near the antenna as possible. Based on this, a band-pass sampling (BPS) frontend for CR/SDR is proposed and verified. We present a receiver architecture based second-order BPS and signal processing techniques for a digital RF frontend. This paper is focused on the benefits of the second-order BPS architecture in spectrum sensing over a wide frequency band range and in multiband receiving without modification of the RF hardware. Methods to manipulate the spectra are described, and reconstruction filter designs are provided. On the basis of this concept, second-order BPS frontends for CR/SDR systems are designed and verified using a hardware platform.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2163-2170
• /
• 2012

신호수신시스템은 수신신호의 주파수, 펄스변조, 스캔 변조, 펄스내 위상변조, 펄스내 주파수 변조 등 다양한 신호에 대한 측정 및 분석능력을 보유하여야 한다. 이러한 신호수신시스템의 성능을 평가하기 위하여 신호원들을 실험실 환경에서 효율적으로 모의발생하고 다수 전파가 존재하는 실제 운영환경과 유사한 복잡한 전파환경을 모의발생할 수 있는 효율적인 신호원 발생기를 제안한다. 제안한 모의전파신호원을 신호수신시스템 개발 전 과정에 걸쳐 활용할 경우 정확한 성능 검증 및 시험 비용을 절감할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.703-705
• /
• 2016

본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동 혼변조 왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동 혼변조 왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 제3차 혼변조 왜곡신호를 측정하여 최고 -138dB를 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.421-422
• /
• 2008

In this paper, CMOS RF front-end circuits for an L1/L5 dual-band global positioning system (GPS)/Galileo receiver are designed in $0.13\;{\mu}m$ CMOS technology. The RF front-end circuits are composed of an RF single-to-differential low noise amplifier, an RF polyphase filter, two down-conversion mixers, two transimpedance amplifiers, a IF polyphase filter, four de-coupling capacitors. The CMOS RF front-end circuits provide gains of 43 dB and 44 dB, noise figures of 4 dB and 3 dB and consume 3.6 mW and 4.8 mW from 1.2 V supply voltage for L1 and L5, respectively.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.205-208
• /
• 2002

This paper presents a quantitative analysis on the intermodulation product between transmitter W-CDMA leakage signal and receiver out of band blocker, and proposes design guide lines for overcoming the effect in receiver design. Our analysis shows that duplexer isolation, attenuation and LNA IIP3 are mainly responsible for the 3rd order intermodulation product. Analysis also shows that LNA IIP3 required for meeting 3GPP TS 34.121 specification is about 1 ㏈m with duplexer isolation of 50 ㏈ and duplexer attenuation of 24㏈.