• Journal of Semiconductor Engineering
• /
• v.1 no.1
• /
• pp.13-30
• /
• 2020

Radio frequency (RF) energy harvesting technology have become a reliable and promising alternative to extend the lifetime of power-constrained wireless networks by eliminating the need for batteries. This emerging technology enables the low-power wireless devices to be self-sustaining and eco-friendly by scavenging RF energy from ambient environment or dedicated energy sources. These attributes make RF energy harvesting technology feasible and attractive to an extended range of applications. However, despite being the most reliable energy harvesting technology, there are several challenges (especially power conversion efficiency, output DC voltage and sensitivity) poised for the implementation of RF energy harvesting systems. In this article, a detailed literature on RF energy harvesting technology has been surveyed to provide guidance for RF energy harvesters design. Since signal strength of the received RF power is limited and weak, high efficiency state-of-the-art RF energy harvesters are required to design for providing sufficient DC supply voltage to wireless networks. Therefore, various designs and their trade-offs with comprehensive analysis for RF energy harvesters have been discussed. This paper can serve as a good reference for the researchers to catch new research topics in the field of RF energy harvesting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.94.1-94.1
• /
• 2015

4세대 방사광 가속기는 선형가속기와 언듈레이터를 활용하여 파장이 0.1 nm인 X선을 빔라인 사용자들에게 제공하는 것을 목표로 하여 2011년부터 건설되고 있다. 이 장치에서 진공시스템은 전자빔 발생장치인 RF Gun을 포함하는 입사장치(Injector)와 빔을 가속시키는 선형가속기(Linac) 그리고 결맞음 방사광을 발생시키는 언듈레이터로 나누어진다. 본 논문에서는 최종 수정 설계 후 제작 및 설치 중인 진공시스템의 건설 현황에 대하여 집중적으로 보고하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2203-2205
• /
• 2003

KIRAMS-13, the first medical cyclotron developed by domestic technique, is used to produce radio-isotope such as $^{18}F$ whose life time is relatively short through test operation. For high-power operation of charged particle accelerators, the power coupler must withstand enormous stresses due to charging induced by high RF power passing through. High-power RF testing with peak power in excess of 30kW has been performed on prototype power coupler for KIRAMS-13 normal conducting cavities. CST MICROWAVE STUDIO(CST MWS) is used for fundamental RF Design, and power coupler is manufactured according to fundamental power coupler design requisite. The qualification of the couplers has occurred for the time being only in a limited set of conditions as the available RF system and control instrumentation are under improvement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.146-147
• /
• 2008

In this paper we report upon an investigation into the effect of sputter RF power on the electrical properties of Gallium doped zinc oxide (ZnO:Ga) film. Structural, electrical and optical properties of the ZnO:Ga films were investigation in terms of the sputtering power. Working pressure fixed in 5 mtorr and RF powers the variable did with 50~100 W. The result, We were able to without substrate temperature obtain resistivity of $9.3\times10^{-4}{\Omega}cm$ and optical transmittance of 90%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.466-467
• /
• 2005

Al doped zinc oxide films (ZnO:Al) were deposited on glass substrate by RF magnetron sputtering from a ZnO target mixed with 2 wt% $Al_2O_3$. The as-deposited ZnO:Al films were rapid-thermal annealed. Electrical properties and structural evolution of the films, as annealed by rapid thermal process (RTP), were studied and compared with the films annealed by conventional annealing process. RTP, the (002) peak intensity increases and the electrical resistivity decreases by 20%, after RT annealing. The effects of RT annealing on the structural evolution and electrical properties of RF sputtered films were further discussed and compared also with the films deposited by DC magnetron sputtering.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.579-584
• /
• 2005

A CMOS direct-conversion mixer with a single transistor-level topology is proposed in this paper. Since the single transistor-level topology needs smaller supply voltage than the conventional Gilbert-cell topology, the proposed mixer structure is suitable for a low power and highly integrated RF system-on-a-chip (SoC). The proposed direct-conversion mixer is designed for the multi-band ultra-wideband (UWB) system covering from 3 to 7 GHz. The conversion gain and input P1dB of the mixer are about 3 dB and -10 dBm, respectively, with multi-band RF signals. The mixer consumes 4.3 mA under a 1.8 V supply voltage.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.61.2-61.2
• /
• 2011

본 연구에서는 박막 태양전지용 투명전극으로 사용하기 위해서 Gun-type RF 마그네트론 스퍼트링을 이용하였다. 챔퍼안의 타겟은 AZO타겟(Zn: 98[wt.%], Al:2[wt.%]을 장착하였고 공정압력은 고진공을 유지하였다. 온도는 $300^{\circ}C$로 고정하였고 전력은 70W로 고정하였다. $Ar^+$ 가스유량비를 20sccm~100sccm으로 변화를 주어 기판 위에 AZO를 증착하여 AZO의 구조적 및 광학적 특성의 의존성을 알아보았다. 모든 가스변화에서 400에서 700 nm까지의 가시광 영역에서의 AZO 박막의 평균 투과도는 약 85% 이상의 우수한 투과율을 보인다. AZO 박막 내의 결정 구조는 (002)면으로 우선 배향을 하는 wurtzite 구조를 가지며, $Ar^+$변화에 의해 두께가 증가하면서 결정립의 주상 (columnar) 성장이 향상되고 결정립의 크기도 증가한다. 이러한 경향성은 $Ar^+$변화에 의해 결정성이 향상된다는 것을 의미한다. 이와 같은 구조 및 광학 특성을 가지는 유리 기판 위에 증착된 AZO는 박막 태양전지용 투명 전극으로 응용이 가능할 것이다.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.3
• /
• pp.171-176
• /
• 2007

Objective : The purpose of this study was to characterize the Rolandic fissure[Rf] and was to identify the Rf using the surface bony landmarks which can be usually exposed on craniotomy. Methods : After morphological evaluation of the Rfs using 21 Korean adult formalin fixed cadavers, craniometric measurement was carried out from the surface bony landmarks of nasion, glabella, bregma, and lambda. Results : The Rfs of both hemispheres did not show the mirror image. The Rfs ran forward and downward toward the sylvian fissure keeping the mean angle of $67^{\circ}$ from mid-sagittal line as elongated S-shape in left and the elongated reverse S-shape in right hemisphere. Connections between the Rf and the longitudinal fissure and between the Rf and the sylvian fissure were found in 3 [7.1%] and 2 [4.8%] of 42 hemispheres, respectively. Most Rfs extended superiorly to 2-3mm lateral to the most superomedial surface of hemispheres and extended inferiorly to 3-5mm superior to the sylvian fissures. The mean distances from the nasion, glabella, bregma, and lambda to the most superomedial aspect of the Rf were $18.8{\pm}0.9cm,\;16.6{\pm}0.8cm,\;5.2{\pm}0.6cm$, and $6.9{\pm}1.0cm$, respectively. The mean distance measured between the Rf and the nasion using traditional method was $18.4{\pm}0.6cm$. Conclusion : The distance between the Rf and the nasion roughly correspond within the range of mean 4 mm compared with that measured by the traditional measurement. These data may be more helpful to delineate the Rf after the placement of drapes for craniotomy.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.19-24
• /
• 2010

The effects of $O_2$ plasma pretreatment on the properties of Ga-doped ZnO films on PET substrate were studied. GZO films were fabricated by RF magnetron sputtering process. To improve surface energy and adhesion between the PET substrate and the GZO film, $O_2$ plasma pretreatment process was used prior to GZO sputtering. As the RF power and the treatment time increased, the crystallinity increased and the contact angle decreased significantly. When the RF power was 100 W and the treatment time was 600 sec in $O_2$ plasma pretreatment process, the resistivity of GZO films on the PET substrate was $1.90{\times}10^{-3}{\Omega}-cm$.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.141-150
• /
• 2018

Crop type classification is essential for supporting agricultural decisions and resource monitoring. Remote sensing techniques, especially using hyperspectral imagery, have been effective in agricultural applications. Hyperspectral imagery acquires contiguous and narrow spectral bands in a wide range. However, large dimensionality results in unreliable estimates of classifiers and high computational burdens. Therefore, reducing the dimensionality of hyperspectral imagery is necessary. In this study, the Random Forest (RF) classifier was utilized for dimensionality reduction as well as classification purpose. RF is an ensemble-learning algorithm created based on the Classification and Regression Tree (CART), which has gained attention due to its high classification accuracy and fast processing speed. The RF performance for crop classification with airborne hyperspectral imagery was assessed. The study area was the cultivated area in Chogye-myeon, Habcheon-gun, Gyeongsangnam-do, South Korea, where the main crops are garlic, onion, and wheat. Parameter optimization was conducted to maximize the classification accuracy. Then, the dimensionality reduction was conducted based on RF variable importance. The result shows that using the selected bands presents an excellent classification accuracy without using whole datasets. Moreover, a majority of selected bands are concentrated on visible (VIS) region, especially region related to chlorophyll content. Therefore, it can be inferred that the phenological status after the mature stage influences red-edge spectral reflectance.