• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.15-21
• /
• 1999

A new design of RF automatic gain control amplifier with low phase shift attenuator is proposed. By using the RF AGC amplifier, the output level of amplifier becomes to be constant. The error is 0.1dB. In addition, for arbitrary RF input power, it is possible to design the gain of amplifier to be fixed. If the constant gain is maintained, it is more reliable to make wanted IMD(Intermodulation Distortion) characteeristic amplifier.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.145-153
• /
• 2011

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important to enable organic movement between trains. In the case of the system such as RF-CBTC (Radio Frequency Communication Based Train Control) the control related information is sent through wireless transmission between on-board system of a train and wayside transmitter. The wayside transmitter collects the running information such as location, velocity from the on-board system and operates the optimizing control by sending the control information such as the target, limited velocity to the on-board system. But, when the communication disconnect or train failure, the critical hazard such as train collision or derailment may be possible because the RF-CBTC depends on the information through wireless communication. This paper discribes of performing Fall-Back system to detect train position in the case of rail break or communication failure to avoid train accident and allows train to be operated safely. It can be implemented with ATP function through track circuits using active-type transformers and axle counters, and allows train to be operated manually in emergency status.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.759-765
• /
• 2012

In this paper, a temperature control for LED (light emitting diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To reduce the fan sound noise, a method of reducing the operation time with optimal size of the heat sink was studied. Also, a control of LED lamps using RF communication was studied.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.4
• /
• pp.433-437
• /
• 2005

The characteristic properties of rice breads produced from several conditions were investigated. The rice bread made in control condition (wheat flour), RF 3 (rice and wheat flour mixing) condition and RF 1 (rice, gluten and modified starch mixing) showed relatively higher volumethan others. The crust and crumb color were measured by Humter colory meter. The rice breads making on RF 5 and RF 6 condition showed higher crust L-value and the crumb L-value of the bread from RF 1 condition was higher than that from other condition. On the texture measuring by texture analyzer, hardness of the bread made from RF 1 and RF 2 conditions and cohesiveness of that from RF 3 condition were lower than control. However the significant higher level of the springiness and chewiness were showed in the bread from RF 1, RF 2 and RF 3 condition. The bread containing 85% of rice, 5% of rice, 5% of gluten and 10% of modified starch which was made in RF 1 condition obtained significant high overall acceptance score by sensory evaluation.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.75-82
• /
• 1999

Ion energy is one of the crucial property in thin film deposition by internal ICP assisted I-PVD. As ion energy is determined by the difference between the plasma potential and the substrate bias potential, ICP excitation frequency was tested with medium frequency of 4 MHz and two types of tuning circuits, alternate and floating LC network with a biasing resistor, were tested. The results showed that plasma potential was less than 5 V in a range of Ar pressures, 5mTorr to 30 mTorr, at 4 MHz RF 600 W and 60 V of maximum RF antenna voltage was maintained either at RF input or output terminal. By proper control of RLC circuit installed after after RF antenna, 50V of RF induced voltage on RF antenna was obtained at 500W input power. The total impedance of RF antenna and plasma was around 10$\Omega$, and minimum RF voltage was obtained with a condition of lowest reactance at most 0.05$\Omega$.

• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.230-236
• /
• 2007

In this study, a tail rotor system for an agricultural RF controlled helicopter was developed and tested. This study concluded the mechanical development of the 'Agro-heli' by completing the tail rotor system and its radio console. The RF control system was closely related with the tail system for the control of flying attitude. The thrust of the tail system balance off the reaction torque, created by the main rotor. Lifting tests with and without the tail system were compared for estimating the consumption of power. The tail system would use $4{\sim}5%$ of the total power which was in an acceptable range. Flying performance and attitude was visually inspected. It showed reliable and safe control during the distance flying trials and could be adapted for utilization in aerial applications. Aerial application using an RF controlled agricultural helicopter may make precise and timely spraying possible.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.130-132
• /
• 2012

In this paper, a temperature control for LED(Light Emitting Diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To minimize the fan sound noise, optimal size of the heat sink was studied. Also, a teleoperting control of LED lamps using RF communication was studied.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.1
• /
• pp.66-71
• /
• 2000

Objective : There are many treatment modalitis in management of idiopathic trigeminal neuralgia. In the secondary trigeminal neuralgia, there has been only sporadic reports of the etiology. Authors report the treatment result of secondary trigeminal neuralgia with percutaneous radiofrequency rhizotomy. Methods : During last ten years, 129 trigeminal neuralgias were treated by percutaneous radiofrequency(RF) rhizotomy by authors. Among them, nine patients were secondary trigeminal neuralgias. These patients refused treatment for the primary cause and only wanted pain control. The offending lesions were three arachnoid cysts, six tumors. The mean age was 47.8 years and the mean duration of follow-up was 6.2 years. The right V2,3 distribution was most prevalent area of pain. Authors used the conventional Hartel's anterior approach and straight electrode for RF lesion generation. Result : The early result was satisfactory. Eight of nine patients became free of pain and one patient needed minimal dose of carbamazepine. The overall pain control was 100%. There was no mortality or morbidity for initial RF rhizotomy. During follow-up, four patients showed recurrence of pain(44%). Among these, two underwent repeated RF rhizotomy and became free of pain. The other two were controlled with medical management. Conclusion : These results indicate that the percutaneous RF rhizotomy is effective means of pain control. Overall recurrence was somewhat higher than that of idiopathic trigeminal neuralgia. Even with recurrence, however, repeated RF rhizotomy seems to be effective method of control of pain in these cases.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.187-196
• /
• 2009

Synthetic Aperture Radar(SAR) satellite system for broad-area imaging has RF systems including SAR radiating a high power, data link system transmitting the acquired image data from the SAR, TC&R(Telemetry, Command, and Ranging) to communicate with a ground segment to control a satellite. Each system transmits RF signal having various frequencies and radiates a high power, RS(Radiated Susceptibility) specification should be verified at an electronic unit mounted in satellite. RF interference can be happened because of non-linearity of a RF system. Therefore, we manufactured a structure model installed antennas which have a similar pattern with a real antenna, the effect by RF interference is analyzed and verified.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.51-55
• /
• 2017

This paper aims to maximize the energy harvesting rate and channel capacity in RF-energy harvesting networks (RF-EHNs) under the constraints of maximum transmit power and minimum quality of service (QoS) in terms of rate capacity for each user. We study a multi-user RF-EHN with frequency division multiple access (FDMA) in a Rayleigh channel. An access point (AP) simultaneously transmitting wireless information and power in the RF-EHN serves a subset of active users which have a power-splitting antenna. To gauge the network performance, we define energy efficiency (EE) and propose an optimization solution for maximizing EE with Lagrangian dual decomposition theory. In simulation results, we confirm that the EE is effectively maximized by the proposed solution with satisfying the given constraints.