• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.208-211
• /
• 2006

The contents of RF test set which can be used for checking the function and performance of 13m antenna installed in KARI site are described in this paper. For the purpose of considering RF test set as the transceiver in COMS, it is designed to retransmit the LRIT and HRIT in L-Band after receiving them in S-Band from 13m antenna. Additionally, this set has a function to turnaround raging tone used for the measurement of distance between satellite and 13m antenna. The required all equipments of RF test set are summarized with configuration. Measurements of several equipments which have already been delivered are described in this paper. The assembled RF test set will be used for the verification of 13m antenna

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.187-190
• /
• 2000

We presents the construction of radio frequency pad area array package modules which operate at radio frequency of 224MHz, and proposes the structure of RF module packages to improve its electrical characteristics. The module of RF PAA package was constructed in the configuration of three dimensional stacked package and reduced size. RF PAA packages showed the optimized and improved gain of 2dB by partitioning the RF transceiver with 3 dimensional stacked PAA packages.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.111-117
• /
• 2003

We propose a diode-based RF pre-distorter with various gain and phase characteristics, for non-linearity compensation of RF power amplifiers. This pre-distorter results in the removal of the diode- and configuration-dependent characteristics in the conventional diode-based RF pre-distorters. We have analyzed the operation principle of the proposed pre-distorter. The results show that gain and phase characteristics of the pre-distorter in all four quadrants are achieved. Several power amplifiers and test signals are used for verifying the performance of the proposed diode-based RF pre-distorter.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.136-139
• /
• 2021

In this paper, we studied the charging characteristics of high-capacity supercapacitor with high current for RF wireless charging system for smart phone charging. The dc output of the RF-DC receiver is connected to supercapacitor after which is connected to DC-DC converter for charging a smart phone. This configuration stably supplies voltage and current for charging it. Studies show that the higher charging current use, the rapidly shorter the charging time of supercapacitor is. The currents of 2A, 10A and 27A were used for charging supercapacitors. The charging time was measured for 3000F, 6000F, 12000F supercapacitors which is parallelly connected with 3000F supercapacitors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.993-999
• /
• 2011

In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. Specially, in WSN environment, in which the administrator's intervention is restricted, the self-configuration capability is essential to establish a power-conservative WSN which provides broad sensing coverage and communication coverage. In this paper, we propose a communication coverage-aware cluster head election algorithm for Herearchical WSNs which consists of communication coverage-aware of the Base station is the cluster head node is elected and a clustering.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.353-353
• /
• 2008

트랜지스터 속도는 현저하게 향상되어지는 반면에 RFICs(RF integrated circuits)는 대용량화, 고속화, 고집적화, 소형화, 고 효율화 온칩(on-chip) 수동소자의 부재에 의해 발전을 이루지 못하였다. 즉, 최근 전자기기의 집적화, 초소형화 됨에 따라 실장 밀도를 높이기 위해 부품의 소형화가 강하게 요구되는 동시에 Radio Frequency(RF)에서 이용가능한 수동소자인 capacitor를 개발하고자 본 논문에서는 손가락 모양(interdigital configuration)을 갖는 RF capacitor를 Ansoft사의 HFSS를 이용하여 이상적인 S-parameter, 정전용랑(capacitance), 손실계수(loss tangent)를 도출하고자 한다. 680um의 $Al_2O_3$ 기판에 BST doped MgO을 30um, Chromium과 gold를 각각 5um로 증착시켰다. 핑거 개수 (n, number), 핑거 길이(1, length), 핑거 간격(g, gap), 핑거 너비(w, width)를 변화 시켜가면서 이상적인 결과 값에 가까운 모양 (interdigital configuration)을 얻을 수 있었다. 핑거 수 3 개 일 때 입력 값에 대하여 손실 없는 출력 값(투과값)을 갖는 $S_{21}$이 1.5GHz에서 6dB이하로 떨어졌으며 핑거 간격이 줄고 핑거 너비가 커지고 핑거길이가 커질수록 높은 캐패시턴스 값을 갖는 것을 확인 할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.53-62
• /
• 2005

This paper presents an interface configuration between the Access Point(AP) of Wibro and Radio Over Fiber(ROF) transceivers for the wireless broadband internet system. The wireless internet could provides 60km/h mobility and 50Mbps IP based data services for each mobile terminal. Thus, low cost of each cell is inevitably required. This paper suggests an interface configuration between AP and Passive Integrated Picocell(PIP) involving ROF links. Characteristics of a typical Fabry-Perot ROF link and a PIP using a passive Electro-Absorption Modulator(EAM) are described and measured for wireless internet applications. In addition, results of RF coverage of a PIP have been shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1038-1043
• /
• 2003

A capacitive-coupled configuration MEMS switch is designed and fabricated, and its characteristics are measured. Low actuation voltage has been achieved by means of small distance between signal line and membrane. Minimum actuation voltage is about 11V. Isolation is around 40dB and insertion loss is about 0.2dB at 2GHz.

• Advances in materials Research
• /
• v.1 no.1
• /
• pp.37-49
• /
• 2012

In this paper, we present modeling and characterization of CNT-based TSVs to be used in high-frequency RF applications. We have developed an integrated model of CNT-based TSVs by incorporating the quantum confinement effects of CNTs with the kinetic inductance phenomenon at high frequencies. Substrate parasitics have been appropriately modeled as a monolithic microwave capacitor with the resonant line technique using a two-polynomial equation. Different parametric variations in the model have been outlined as case studies. Furthermore, electrical performance and signal integrity analysis on different cases have been used to determine the optimized configuration for CNT-based TSVs for high frequency RF applications.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.621-624
• /
• 1998

This paper presents a new configuration of dielectric bandpass filter using the comb-line filter design theory. This filter is composed of a homogeneous dielectric monoblock $(\varepsilonr=35.5)$ with two metal post and a dielectric sheet $(\varepsilonr=9.8).$ In this structure, the RF leakage is suppressed without other shield housing. For the fabricated filter, insertion loss value in the passband region was 0.9dB(Max.) and return loss value was 19dB(Min). Also, this filter has a attenuation pole in the stopband.