• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.71-79
• /
• 1995

For the fabrication of high sensitive intrinsic fiber optic Fabry-Perot interferometeric sensor, the deposition conditions of $TiO_{2}$ thin film used to the internal mirrors of the sensor were investigated. The $TiO_{2}$ film deposited by RF magnetron sputter had higher refractive index ($2.36{\sim}2.48$) and better stoiciometry (O/Ti = 2) than that deposited bye-beam evaporator. In the case of forming $TiO_{2}$ internal mirror by using fusion splicing technique, the $TiO_{2}$ reflection mirror deposited by RF magnetron sputter in the condition of 120W RF power showed high. reflectance and excellent controllability of reflection power. The fabricated intrinsic fiber optic Fabry-Perot interferometer with two $TiO_{2}$ internal mirrors deposited under the condition showed very stable fringe patterns. It is, therefore, expected that the interferometer will be applicable to various high precision sensors.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.47-51
• /
• 2007

F-doped SiOC : H thin films with low refractive index were deposited on Si wafer and glass substrate by plasma enhanced chemical vapor deposition (PECVD) as a function of rf powers, substrate temperatures, gas rates and their composition flow ratios ($SiH_4,\;CF_4$ and $N_2O$). The refractive index of the F-doped SiOC : H film continuously decreased with increasing deposition temperature and rf power. As $N_2O$ gas flow rate decreased, the refractive index of the deposited films decreased down to 1.3778, reaching a minimum value at rf power of 180W and $100^{\circ}C$ without $N_2O$ gas. The fluorine content of F-doped SiOC : H film increased from 1.9 at% to 2.4 at% as the rf power was increased from 60 W to 180 W, which results in the decrease of refractive index.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.182-187
• /
• 2009

In this paper, the power management module of wireless sensor node is designed and fabricated utilizing RF energy from reader antenna of commercial RFID system, which is mainly categorized in the energy harvesting. For this, the rectenna and the high efficient boost converter is designed to get the DC power from RF power for the charging the battery. When the RF power from RFID reader antenna is 1.2[W], the DC power of 3.1[mW] at the distance of 1[m] and 1[mW] at 5.5[m] are obtained. Considering the connection to the battery, the boost converter for enhancing the conversion efficiency is designed. The conversion efficiency at the distance of 4[m] is 79.3[%] and the harvested power is 1.36[mW] which is actually used for the charging the battery. This value is available in the wireless sensor networking.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1220-1228
• /
• 2010

In this paper, we suggest a scheme to develop an efficient discrete nonlinear model based on polynomial structure for a RF power amplifier(PA). We describe a procedure to extract a discrete nonlinear model such as Taylor series or memory polynomial by sampling the input and output signal of RF PA. The performance of the model is analyzed varying the model parameters such as sample rate, nonlinear order, and memory depth. The results show that the relative error of the model is converged if the parameters are larger than specific values. We suggest an efficient modeling scheme considering complexity of the discrete model depending on the values of the model parameters. Modeling efficiency index(MEI) is defined, and it is used to extract optimum values for the model parameters. The suggested scheme is applied to discrete modeling of various RF PAs with various input signals such as WCDMA, WiBro, etc. The suggested scheme can be applied to the efficient design of digital predistorter for the wideband transmitter.

• Journal of Sensor Science and Technology
• /
• v.4 no.2
• /
• pp.58-63
• /
• 1995

The effects of substrate temperature, RF power, and $NH_{3}/SiH_{4}$ gas flow ratio on the dielectric constant and optical bandgap of amorphous silicon nitride (a-SiNx:H) thin films prepared by PECVD method using RF glow discharge decomposition of $SiH_{4}$ and $NH_{3}$ gas mixtures have been studied. The dielectric constant and optical bandgap of a-SiNx:H thin films were greatly exchanged as by increasing substrate temperature, RF power, and $NH_{3}/SiH_{4}$ gas flow ratio. The dielectric constant of a-SiNx:H films was increased and optical bandgap of a-SiNx:H films was decreased as the substrate temperature was increased. When the substrate temperature, RF power, gas pressure, $NH_{3}/SiH_{4}$ gas flow ratio, and thickness were $250^{\circ}C$, 20 W, 500 mTorr, 10 and $1500\;{\AA}$, respectively, the dielectric constant, breakdown field and optical bandgap of a-SiNx:H film were 4.3, 1 MV/cm, and 2.9 eV, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.885-892
• /
• 2013

The main advantage of ESPAR antenna is that ESPAR antenna requires only a single RF chain for reduction of transceiver's hardware complexity, as compared to conventional MIMO system. In conventional MIMO system, each data symbol is mapped to each antenna. But, each data symbol is mapped to each orthogonal basis pattern in ESPAR antenna system. In this paper, we design beamspace MIMO system using ESPAR antenna with single RF chain for MIMO system of low-complexity and low power consumption. And then, we analyze performance of beamspace MIMO according to each PSK modulation. Performance of beamspace MIMO system is similar to performance of conventional MIMO system. As a result of analyzing the performance of beamspace MIMO system using higher-order PSK modulation. we can confirm that performance characteristic of beamspace MIMO system with low complexity and low power consumption is similar to digital communication of signal domain.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1133-1136
• /
• 1995

RF-magnetron sputtering 방법으로 형성한 $BaTa_2O_6$의 공정변수에 따른 전기, 광학적 특성변화를 관찰하여 $BaTa_2O_6$ 박막의 TFELD(thin film electroluminescent display) 절연막으로서 응용 가능성을 연구하였다. $BaTa_2O_6$ 박막의 유전특성은 증착시의 $O_2$ 함량과 sputtering 압력의 변화에는 큰 영향을 받지 않으나 기판온도에는 영향을 받는 것으로 확인되었다. 이들 공정변수를 가변하여 실험한 결과, $BaTa_2O_6$ 박막 형성의 최적조건으로 플라즈마 압력을 6 mtorr, sputtering gas 내의 $O_2$ 혼합비율은 40%, 기판온도는 $100^{\circ}C$로 결정하였다. 이상의 조건에서 제조된 $BaTa_2O_6$ 박막은 10.2 ${\mu}C/cm^2$의 매우 우수한 성능지수를 보였다. 이상의 $BaTa_2O_6$ 박막을 하부절연층으로, 절연파괴강도가 높은 $SiO_xN_y$를 상부 절연층으로 사용하여 제조된 EL 소자는 1 kHz, 삼각파 구동시 발광 임계전압은 약 32 volts, 최대휘도는 54 $cd/m^2$으로 측정되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.290-290
• /
• 2012

본 실험에서는 RF magnetron sputtering법과 evaporator법을 이용하여 다층박막 OMO구조를 $30{\times}30mm$ 유리기판 위에 제작하였다. Oxide층은 Sputter장비를 이용 IGZO막을 제작하였으며, Metal 층은 evaporator장비를 이용 Ag 막을 제작하였다. 변수로는 Oxide층의 시간에 따른 특성 변화를 연구하였다. 소결된 타겟으로는 In:Ga:ZnO를 각각 1:1:1 mol%의 조성비로 혼합하여 이용하였으며, Ag는 99.999%의 순도를 가진다. Oxide층의 RF sputter 공정 조건으로는 초기압력 $3.0{\times}10^{-6}$ Torr 이하로 하였으며, 증착 압력 $2.0{\times}10^{-2}$ Torr, Rf power 30 W, Ar gas 50 sccm으로 고정 시켰으며, 변수로는 5, 7, 9, 11분은 시간 차이를 두어 증착을 하였다. Metal층의 Evaporator 공정조건으로는 $5.0{\times}10^{-6}$ Torr이하, 전압은 0.3 V, Thickness moniter로 두께를 확인해가며 증착하였으며, $100{\AA}$으로 고정시켰다. 분석결과로는 XRD 측정 결과 35도 부근에서 Ag 피크가 관찰되었다. IGZO막 하나일때 90% 이상의 평균 투과율을 보였으며, 3층의 구조가 모두 증착됐을때의 투과도는 가시광영역에서 평균 80% 이상의 투과율을 보였으며, 500 nm부터 투과율이 떨어지기 시작해 800 nm부근에서는 평균 투과율이 30%까지 떨어져 Metal층인 Ag가 하나의 layer로 잘 증착이 된것을 보여주며, 플라즈몬효과를 보여줌을 알수있다. AFM측정 결과 평균 거칠기는 1.2 nm 정도의 거칠기를 확인했다. 홀 측정결과 전기적 특성은 발견되지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.575-575
• /
• 2013

Indium Zinc Oxide (IZO)는 가시광 영역(380~780 nm)에서 높은 투과율과 적외선영역에서 높은 반사율을 보이는 투명산화막으로서 Flexible display 적용으로 주목 받는 재료이다. 특히 비 화학적 양론비(non-stoichiometric)로 성장된 박막은 N형 반도체 특성을 갖기 때문에 광전자 소자, 액정표시소자와 태양전지의 투명전극 재료로 이용되고 있으며, 향 후에도 수요는 계속 증가될 전망이다. 일반적으로 IZO 박막은 높은 열처리 온도에 의한 기판재료의 선택이 한정적인 단점이 있다. 따라서 최근에는 정밀하게 제어된 에너지를 가진 전자를 표면에 조사(E-beam irradiation)하여 박막의 물성을 개선하고 기판재료의 선택성을 넓히는 연구가 활발히 진행되고 있다 [1]. 본 연구에서는 RF Magnetron Sputtering 법을 이용하여 Glass 위에 IZO를 증착하였다. 스퍼터링타겟은 고순도 IZO 타겟을 이용하여 100 nm의 두께를 가지는 박막을 증착하였다. 증착된 IZO 박막에 E-beam Source ((주)인포비온)를 이용하여 E-beam irradiation energy 조건에 변화를 주어 박막의 물성 변화를 관찰하였다. IZO 박막의 두께를 측정하기 위해 SEM (Cross section)을 이용하였다. E-beam irradiation energy에 따른 가시광 영역(380~780 nm)에서의 광투 과도는 UV-Vis spectrometer를 사용하여 측정하였고, 전기적인 특성은 Hall measurement system 을 이용하여 측정하였다. 또한 박막의 결정성과 거칠기의 변화는 XRD (X-ray Diffraction)와 원자 간력현미경(Atomic Force Microscope; AFM)을 이용하여 측정하였다. Rf magnetron Sputtering 법을 이용하여 증착한 IZO 박막에 Post E-beam irradiation이 전기전도 및 광 투과특성과 결정성과 표면 조도를 향상시키는데 크게 기여함을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.1-6
• /
• 2004

Effective gate resistance, extracted by direct extraction method, is analyzed among various gate length, in nanoscale MOSFET for RFIC. Extracted effective gate resistance is compared to measured data and verified with simplified model. Extracted parameters are accurate to 10GHz. In the same process technology effect has a different kind of gate voltage dependency and frequency dependency compared with general effective gate resistance. Particularly, the characteristic of effective gate resistance before and after threshold voltage is noticeable. When gate voltage is about threshold voltage, effective gate resistance is abnormally high. This characteristic will be an important reference for RF MOSFET modeling using direct extraction method.