• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.190-193
• /
• 2009

The most essential element in wireless sensor network is wireless sensor node which collects environmental information and transmits it to the user application systems. Recently, due to the technological advancement, wireless sensor nodes are become smaller, more intelligent and less power consuming. Especially, SoC(System-on-Chip) technology, which unifies the MCU, RF module, memory and other element inside one chip, plays an important part for miniaturization of sensor node, hence reduces the manufacturing expenses. In this paper, we have designed a miniaturized wireless sensor node for wireless sensor network using commercial SoC technology and discussed about some application scenario and additional considerations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.227-232
• /
• 2021

In this paper, the narrow-band characteristic, which is the disadvantage of the existing the PD sensor, was improved by transforming the sensor shape into a trapezoidal shape to improve the characteristics of the dipole-shaped conventional PD(Patial Discharge) sensor. In addition, by applying a cavity structure, which is a structure that can fundamentally block the electromagnetic wave signal from the outside as it is used for an external sensor, it is a partial discharge sensor that takes advantage of the structural advantages of low cost and convenience of installation. As a result of the experiment, it was shown that there is a broadband characteristic of about 70.5%(1.59~3.32GHz) at the center frequency of 2.45GHz, and the broadband characteristic was confirmed.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.615-620
• /
• 2009

Nowadays, wireless infrastructures such as sensor networks are widely used in many different areas. In case of sensor networks, the wirelessly connected sensors can execute different kind of tasks in a diversity of environments, and one of the most important parameter for a successful execution of such tasks is the location information of each node. As to localization problems in WSNs, there are ToA (Timer of Arrival), RSS (Received Signal Strength), AoA (Angle of Arrival), etc. In this paper, we propose a modification of existing ToA and RSS based methods, adding a weighted average scheme to measure more precisely the distance between nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced by 0.1 cm in indoor environment ($5m{\times}7m$) and 0.6cm in outdoor environment ($10{\times}10m$).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1689-1695
• /
• 2008

The development of low-power wireless communication and low-cost multi-functional smart sensor has enabled the sensor network that can perceive the status information in remote distance. Sensor nodes are sending the collected data to the node in the base station through temporary communication path using the low-cost RF communication module. Sensor nodes get the energy supply from small batteries, however, they are installed in the locations that are not easy to replace batteries, in general, so it is necessary to minimize the average power consumption of the sensor nodes. It is known that the RF modules used for wireless communication are consuming 20-60% of the total power for sensor nodes. This study suggests the probability inference heuristic based non-periodic transmission to send the collected information to the base station node, when the calculated value by probability is bigger than an optional random value, adapting real-time to the variation characteristics of sensing datain order to improve the energy consumption used in the transmission of sensed data. In this transmission method suggested, transmitting is decided after evaluation of the data sensed by the probability inference heuristic algorithm and the directly sensed data, and the coefficient that is needed for its algorithm is decided through the reappearance rate of the algorithm verification data.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.162-162
• /
• 2012

고 해상도를 요구하는 3차원 감성터치센서의 핵심 부품인 ITO 박막은 매우 얇은 두께에서 높은 투과율과 고 전도성을 동시에 가져야 한다. 이러한 박막 물성을 함께 가지는 고품질 ITO 초박막을 제조하기 위해서 DC와 RF의 장점을 동시에 가지는 DC/RF 중첩형 마그네트론 스퍼터링과 전자기장을 인가한 마그네트론 스퍼터링 법을 이용하여 증착한 초박막 ITO의 Sn함량에 따른 물성 및 미세 구조 변화를 관찰 하였다. RF/(DC+RF) 중첩 비율 및 전자기장 파워에 따른 ITO 초박막의 물성 변화를 확인 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.430-433
• /
• 2006

Wireless sensor network plays a prominent role in tracking the location of the target outdoor and indoor. This paper describes the implementation of the passive indoor location tracking system using ultrasonic and RF technologies that provides accurate location in the form of user space and position in three dimensions. Our system used a combination of RF and ultrasonic technologies to provide a location-support service to users and applicants. Ceiling-mounted beacons were spread through the building, publishing location information on an RF signal. The person carried a listener and the listener determined the location by calculating the distance from three beacons using triangulation algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1119-1123
• /
• 2006

Wireless sensor network plays a prominent role in tracking the location of the target outdoor or indoor. This paper describes the implementation of the passive indoor location tracking system using ultrasonic and RF technologies that provides accurate location in the form of user space and position in three dimensions. Our system used a combination of RF and ultrasonic technologies to provide a location-support service to users and applicants. Ceiling-mounted beacons were spread through the building, publishing location information on an RF signal. The person carried a listener and the listener determined the location by calculating the distance from three beacons using triangulation algorithm.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.90-95
• /
• 2000

The substrate for pyroelectric IR sensor which has orientation similar to MgO single crystal was fabricated by depositing the MgO thin film on $Si_3N_4/SiO_2/Si_3N_4$/Si. The MgO thin film was deposited by RF magnetron sputtering. The c-axis orientation of PLT thin film deposited on Pt/MgO(100)/$Si_3N_4/SiO_2/Si_3N_4$/Si substrate was investigated. The MgO thin film deposited at $500^{\circ}C$ at a gas pressure of 30 mTorr with RF power of 160 W exhibited a good a-axis orientation. The PLT thin films deposited on these substrates also exhibited c-axis orientation similar to the PLT thin films deposited on MgO single crystal substrate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.749-756
• /
• 2015

In this paper, we propose a unique systolic structure and communication algorithm that maintains a solid link between nodes using synchronous digital communication and enables low power communication. This system was designed by using CC2500 RF transceiver, CC2590 RF front end and C8051F330 low power microcontroller. The measurement of power consumption in the network link shows below $400{\mu}W$ in data transfer rate 320bps. The system constitutes the base unit of low power wireless network that was composed of each seven link nodes having eight sensor nodes. Results of the experiments show that link nodes using a 4Ah battery could operate over 3 years without replacement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2009

Through the automatic sensing of the environment, USN technology can give the best services. In this work, we have developed an active RFID system and examined its performance. By implementing it into water quality sensors, we constructed a system that can detect diverse indoor/outdoor environment and provide information about the pollution level obtained from the temperature and PH sensors. Our RF system had an internal Print-on-PCB antenna for the miniaturization of the tag. We used a RF transceiver CC2510 chipset of TI company to realize the active RFID function. By using RSSI constants obtained, we performed the evaluation of real time location accuracy with a software written in Labview. Among 10 arbitrary locations, we obtained average measurement errors of 1.69 m in x axis and 1.66 m in y axis. This technology can be applied to logistics, environmental monitoring, prevention of missing children and various applications.