• 제목/요약/키워드: REQUIRED-TIME

검색결과 11,686건 처리시간 0.04초

Size Refinement of Empirical Likelihood Tests in Time Series Models using Sieve Bootstraps

  • Lee, Jin
    • Communications for Statistical Applications and Methods
    • /
    • 제20권3호
    • /
    • pp.199-205
    • /
    • 2013
  • We employ sieve bootstraps for empirical likelihood tests in time series models because their null distributions are often vulnerable to the presence of serial dependence. We found a significant size refinement of the bootstrapped versions of a Lagrangian Multiplier type test statistic regardless of the bandwidth choice required by long-run variance estimations.

VHDL 표현으로부터의 시간 지연 합성 (Timing Synthesis from VHDL Description)

  • 박상헌;최기영
    • 전자공학회논문지A
    • /
    • 제31A권6호
    • /
    • pp.209-221
    • /
    • 1994
  • Timers are commonly used in hardware design for time delays that are to be much longer than the system clock period. In this paper, we present a method by which we can synthesie a hardware containing timers that implement long time delays described in VHDL. Because, in general, timers require high hardware cost, they must be utilized as efficiently as possible. To solve this problem we define a graph model and propose an algorithm that uses the graph model to minimize number of timers. A preliminary experimental result show that the algorithm implements all required time delays using minimum number of timers.

  • PDF

Reliability of an elastic bar under tension in a corrosive environment

  • Elishakoff, Isaac;Soret, Clement
    • Ocean Systems Engineering
    • /
    • 제2권3호
    • /
    • pp.173-187
    • /
    • 2012
  • In this study we investigate the reliability of a bar subjected to a random tensile load in presence of corrosion. We consider linear, quadratic and exponential models that connect the stress in the bar with the corrosion rate. Two probability densities are considered for the load, with attendant derivation of the time-dependant reliability. The design time of operation is determined utilizing the requirement that the reliability must not be less than the required value.

PWN SED modeling: stationary and time-dependent leptonic scenarios

  • Kim, Seung-jong;An, Hong-jun
    • 천문학회보
    • /
    • 제43권2호
    • /
    • pp.43.3-43.3
    • /
    • 2018
  • We develop a model for broadband spectral energy distribution (SED) of Pulsar Wind Nebulae (PWNe). The model assumes that electrons/positrons in the pulsar wind are injected into and stochastically accelerated in the pulsar termination shock. We consider two scenarios: a stationary one-zone case and a time-evolving multi-zone case. In the latter scenario, flow properties in the PWNe (magnetic field, bulk speed) are modeled to vary in time and space. We apply the model to the broadband SED of the pulsar wind nebula 3C 58. From the modeling, we find that a broken power-law injection is required with the maximum electron energy of ~200 TeV.

  • PDF

분할형 CSA를 이용한 Montgomery 곱셈기 (The Montgomery Multiplier Using Scalable Carry Save Adder)

  • 하재철;문상재
    • 정보보호학회논문지
    • /
    • 제10권3호
    • /
    • pp.77-83
    • /
    • 2000
  • This paper presents a new modular multiplier for Montgomery multiplication using iterative small carry save adder. The proposed multiplier is more flexible and suitable for long bit multiplication due to its scalable property according to design area and required computing time. We describe the word-based Montgomery algorithm and design architecture of the multiplier. Our analysis and simulation show that the proposed multiplier provides area/time tradeoffs in limited design area such as IC cards.

TIME STEPWISE LOCAL VOLATILITY

  • Bae, Hyeong-Ohk;Lim, Hyuncheul
    • 대한수학회보
    • /
    • 제59권2호
    • /
    • pp.507-528
    • /
    • 2022
  • We propose a path integral method to construct a time stepwise local volatility for the stock index market under Dupire's model. Our method is focused on the pricing with the Monte Carlo Method (MCM). We solve the problem of randomness of MCM by applying numerical integration. We reconstruct this task as a matrix equation. Our method provides the analytic Jacobian and Hessian required by the nonlinear optimization solver, resulting in stable and fast calculations.

LEO Satellite Time Synchronization Architecture

  • Kwon, Ki-Ho;Kim, Day-Young;Lee, Jong-In;Kim, Hak-Jung;Lee, Sang-Jeong
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.367-370
    • /
    • 2006
  • A GPS-based time synchronization technique employing a refined HW circuitry and SW algorithm is considered as fine time-management system for Low Earth Orbit (LEO) remote sensing satellites. By synchronizing the On-Board Time (OBT) within satellites to the GPS 1PPS, a very expensive, highly accurate on-board clock is not required to determine the precise on-board time management. Also, the satellite command generation in ground stations and postprocessing of earth observation data which a particular image is acquired. This paper analyses on-orbit verification of the existing satellite time sync architecture and presents a new time sync architecture, operation and relation between the OBT and the GPS time.

  • PDF

동적위치유지시스템을 이용하는 부유식 해양구조물의 시간대역 성능평가를 위한 프레임워크의 개발 (Development of a Framework for Evaluating Time Domain Performance of a Floating Offshore Structure with Dynamic Positioning System)

  • 이재용
    • 한국산학기술학회논문지
    • /
    • 제18권11호
    • /
    • pp.718-724
    • /
    • 2017
  • 최근 생산 부분에 집중되어 있던 국내 해양플랜트 산업구조를 엔지니어링 분야로 확대하기 위한 노력이 지속되어왔다. 하지만 부유식 해양플랜트 엔지니어링 기술의 핵심 중 하나인 시간대역에서의 운동해석의 경우 국외 회사에서 제공되는 정보에 거의 전적으로 의존하여 왔다. 특히 동적 위치 유지 시스템은 초기 설계에서 해외 선진사가 제공하는 정보에 기반하며, 그 결과를 선형에 반영하기 위해서는 시간적으로나 비용 면에서 많은 손실을 감수해야 한다. 본 논문에서는 동적위치유지시스템 (Dynamic Positioning System, DPS)을 사용하는 부유식 해양구조물의 시간대역 운동 해석에 필요한 프로그램의 프레임워크를 다룬다. 개발된 프레임워크는 시간대역 해석을 쉽게 수행할 수 있도록 해석에 필요한 입력 데이터를 생성하고, DPS의 제어 알고리즘 및 성능을 평가할 수 있도록 모듈화 하였다. 이를 통해 DPS의 배치 및 용량결정과 여러 가지 제어 알고리즘의 테스트가 쉽게 이루어지도록 하였다. 실제 모델 선박을 이용한 시뮬레이션을 통해 개발된 프레임워크의 실효성을 검증하였으며 전체 작업에 걸리는 시간이 50% 이상 감소하는 것을 확인하였다.

Performance-based Fire Protection Design of Domestic Super High-rise Buildings - Evaluation by ASET and RSET -

  • Roh, Hyeong-Ki
    • 한국방재학회 논문집
    • /
    • 제11권2호
    • /
    • pp.9-13
    • /
    • 2011
  • 초고층 빌딩 건설 시 요구되는 성능위주 소방설계는 인명 안전을 확보할 수 있는 능동적인 대책으로서 화재 위험성을 평가하고, 공학적 분석 결과를 토대로 하여 방재시스템을 구축하는 것으로 관련 법규 및 기준을 적용하여 수행하는 기존의 설계 방식보다 인명 안전의 확보에 있어서 매우 효율적이고 타당하다고 보여진다. 본 연구는 피난 요구 시간인 RSET과 피난이 가능한 시간인 ASET에 의한Time-line Analysis을 적용하였으며 또한 ASET과 RSET을 비교, 분석하기 위하여 화재 및 피난 시뮬레이션을 수행하였다. 연구 결과, 스프링클러설비가ASET을 증가시켰으며, 화재감지 및 경보시간의 단축이 RSET을 효과적으로 감소시켜 주고 있다. 단축된 시간은 인명의 안전을 확보하는데 많은 영향을 미치는 것으로 확인되었다. 또한 소화설비, 화재 감지 및 경보설비가 정상적으로 작동되도록 유지 관리되는 것도 중요한 것으로 파악되었다. 화재의 성상을 데이터 베이스화하고 피난 대응 프로그램 등이 구축되면 성능위주 설계에 유용한 자료로 이용될 수 있다.

Clinical comparison of intraoral CMOS and PSP detectors in terms of time efficiency, patient comfort, and subjective image quality

  • Kamburoglu, Kivanc;Samunahmetoglu, Ercin;Eratam, Nejlan;Sonmez, Gul;Karahan, Sevilay
    • Imaging Science in Dentistry
    • /
    • 제52권1호
    • /
    • pp.93-101
    • /
    • 2022
  • Purpose: This study compared the effectiveness of complementary metal-oxide semiconductors (CMOS) and photostimulable phosphor (PSP) plates as intraoral imaging systems in terms of time efficacy, patient comfort, and subjective image quality assessment in real clinical settings. Materials and Methods: Fifty-eight patients (25 women and 33 men) were included. Patients were referred for a full-mouth radiological examination including 1 bitewing radiograph (left and right) and 8 periapical radiographs for each side (left maxilla/mandible and right maxilla/mandible). For each patient, 1 side of the dental arch was radiographed using a CMOS detector, whereas the other side was radiographed using a PSP detector, ensuring an equal number of left and right arches imaged by each detector. Clinical application time, comfort/pain, and subjective image quality were assessed for each detector. Continuous variables were summarized as mean±standard deviation. Differences between detectors were evaluated using repeated-measures analysis of variance. P<0.05 was accepted as significant. Results: The mean total time required for all imaging procedures with the CMOS detector was significantly lower than the mean total time required for imaging procedures with PSP (P<0.05). The overall mean patient comfort scores for the CMOS and PSP detectors were 4.57 and 4.48, respectively, without a statistically significant difference (P>0.05). The performance of both observers in subjectively assessing structures was significantly higher when using CMOS images than when using PSP images for all regions (P<0.05). Conclusion: The CMOS detector was found to be superior to the PSP detector in terms of clinical time efficacy and subjective image quality.