• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.1-13
• /
• 2020

There are many factors that influence the image quality of CMOS camera images, among which the image exposure time is an important factor. If the image exposure time is long, the entire image on the screen becomes brighter. If the exposure time is shorter, the entire image becomes darker. When photographing a still image, real time is not required because the automatic exposure system is given sufficient time to obtain an appropriate exposure time. However, if the surroundings and environment change rapidly like the black box of a driving car, the exposure time should be applied in response to real time. To this end, a robust automatic exposure system for real-time performance and ambient light environment is required. An automatic exposure system that has real-time capability and is robust against the ambient light environment is required. we designed a real-time control sysem capable of parallel operation processing through the design of an embedded system using zynq's logic and ARM core, and developed a real-time CMOS automatic exposure system that is robust to noise and converges to a desired target value within 66 ms through PID control.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.7
• /
• pp.77-84
• /
• 2015

The study is to investigate which features are perceived by Social Network Service(SNS) users as the most required one to further boost the usage of service, and to examine the perception of these features of SNS sites varies according to their demographic and service usage characteristics. The study also is to suggest a few of research propositions on the relationships between required features of SNS sites and characteristics of SNS users, based on statistical analyses. To accomplish these research purposes, the study defined characteristics of SNS users including demographic(gender, age) and service usage one(start time of service usage, service usage place), and required features of SNS sites(system, service, information, emotion) based on the literature review of SNS. The results show, based on the statistical analyses using survey questionnaire on Korean and Chinese SNS users, that there are differences in perception of required features of SNS sites among the respondents grouped by age, start time of service usage, service usage place. Finally, the study proposed three research propositions, based on the analysis result, that could be used in SNS related researches in the future.

• Korean journal of food and cookery science
• /
• v.20 no.3
• /
• pp.292-298
• /
• 2004

This study researched the microbial change of quality according to various phases of product flow of Dongtae-Jeon (a pan-fried dish) and rolled egg in packaged meals. In order to carry out the study, the time required, temperature, water activity and microbial quality were measured at various phases of production flow of Dongtae-Jeon and rolled egg in packaged meals, and the effects of these factors on microbial multiplication was analyzed. According to the phases in product flow of Dongtae-Jeon, it was shown that the time required is 12.5hrs and water activity is distributed 0.932-0.980. These conditions were suitable for microbial multiplication. According to the phases in product flow of rolled egg, it was shown that the time required is 3.3hrs. In addition, qualitative analysis of pathogenic microorganisms (Salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus) detected no such microorganisms in any of the samples.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.511-517
• /
• 2015

Determination of the required reserve capacity has an important function in operation of power system and it is calculated based on the largest loss of supply. However, conventional method cannot be applied in future power system, because potential grid-connected distributed generator and abnormal temperature cause the large load imbalance. Therefore this paper address new framework for determining the optimal required reserve capacity taking into account the real time load imbalance. At first, we introduce the way of operating reserve resources which are the secondary, tertiary, Direct Load Control (DLC) and Load shedding reserves to make up the load imbalance. Then, the formulated problem can be solved by the Probabilistic Dynamic Programming (PDP) method. In case study, we divide two cases for comparing the cost function between the conventional method and the proposed method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2013

In this paper, a configuration procedure of a transportation infrastructure system for GNSS based very precise real-time positioning is proposed. This infrastructure system consists of several receiving station, a central station, and communication sub-systems. The required performance, design, implementation and verification of each sub-system are explained respectively. The required performance can be broken down into accuracy, integrity, stability, processing time. The design of the each sub-system is performed in accordance with the required performance and each sub-system is built with regard to the design. Lastly the implemented system is verified in comparison with the required performance.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.72-76
• /
• 2015

Capital project benchmarking requires an effective cost normalization process to compare cost performance of projects accomplished in different time and location. Existing cost normalization approaches have been established based on the assumption that all required information for cost normalization is fully identified once a project is completed. Cost normalization, however, is sometimes required to evaluate phase-level outcomes of an ongoing project where the required information is not fully available. This paper aims to provide a cost normalization procedure for phase-based performance assessment. The procedure consists of three normalization steps: currency conversion, location adjustment, and time adjustment considering various scenarios where the required information is not fully identified. This paper also presents how the cost normalization procedure has been applied to the 10-10 Performance Assessment Program, which is a phase-based performance assessment system developed by the Construction Industry Institute (CII). Both researchers and industrial professionals can apply the cost normalization procedure to studies and practices regarding to cost estimation, feasibility analysis, and performance assessment.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.133-139
• /
• 2016

The incubation time required for hatching of O. ocellatus were investigated through the processes of egg and embryonic developments by the dissecting microscopic and visual observations. And differences in ecological characteristics of the plankton mode of life or the benthic mode of life according to total numbers of the suckers on each short arm of the hatched juvenile larvae of O. ocellatus were studied by comparisons with other octopodidae species. Compared with the recent a few results reported by other researchers associated with the incubation time required for hatching by female adult mother of O. minor (73-90 days after spawning at $20.9-21.5^{\circ}C$ ranges), in this study, the incubation time required for hatching by female adult mother of O. ocellatus was 56-57 days after spawning at $11.0-20.4^{\circ}C$. Therefore, the incubation time required for hatching by female adult mother varied with Octopodidae species. In this studies, each ovarian egg laid by a female was connected to an egg string attaching to the surface of the wall or bottom of vacunt shell of Rapana venosa. Egg and embryonic developments of this species were studied in the indoor aquaria, in the specific gravity ranging 1.024-1.025. the hatched juvenile of O. ocellatus is 10.3 mm in the mean total length and 4.5 mm in mantle length, and each of its short arms has 18-20 suckers. The just hatched juvenile larvae of O. ocellatus enter the benthic mode of life (benthic larval stage) after hatching. In particular, regarding differences in ecological characteristics of the mode of life according to total numbers of the suckers, O. vulgaris may not need to have many suckers because they enter the planktonic mode of life after hatching, however O. ocellatus may need to have many suckers, because they should adapt to the benthic mode of life. And also the just hatched juvenile larvae of O. minor (bearing many suckers more than O. ocellatus) enter the benthic mode of life (benthic larval stage) after hatching. Therefore, the total number of the suckers on each short arm of the hatched juvenile larvae can be used for determining whether an octopus species has planktonic larval stages or benthic larval stage (benthic mode of life). In particular, The intracohort cannibalism phenomena appeared at the hatched juvenile larval stage because the larval stage of O. ocellatus and O. minor enter into the benthic larval stage in the early stage, unlike entering into the plaktonic larval stage in other Octopus species such as O. vulgaris: at this time, the early hatched larvae fed the late hatched larvae (they are the same species and almost same ages). Therefore, the intracohort cannibalism pheneomena occur in the just hatched juvenile stage of only O. ocellatus and O. minor.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.278-288
• /
• 2016

Automation ensures accurate and well-organized container transportation in container terminals. This paper addresses operational issues such as equipment scheduling and the coordination between various pieces of equipment in a rail-based automated container terminal. Containers are relayed using multiple types of equipment from road trucks to a vessel and vice versa. Therefore, handshaking is required during a container transfer between different pieces of equipment. Synchronization between the schedules of all the equipment is important to reduce equipment waiting times and the time required for transporting containers, which results in a short turnaround time for a vessel. This paper proposes an integrated control system with the objective of synchronizing the operations of different types of equipment, provides a list of decisions to be made by the control module of each type of equipment, and shows all the required information transfers between control modules. A scheme for the integrated scheduling of multiple types of equipment is proposed. The decisions made by each control module in a real-time fashion are listed with detailed explanations, and the information transfer between managers in a real-time situation at the proposed terminal is described.

• Journal of Korean Academy of Nursing
• /
• v.5 no.2
• /
• pp.38-50
• /
• 1975

This study was conducted to find the shortest optimum time for taking oral temperature and axillary temperature, which does not affect reliability of body temperature. For this purpose, first, the time at which all the samples are reaching maximum temperature is identified Second, the mean maximum temperature is compared with the mean temperature of each consecutive measurement by T-test to find the time at which no significant changes in temperature occurs along time sequence. Third, optimum temperatures are set at points of -0.2℉, -0.4℉, -0.6℉, -0.8℉, -1.0℉, -1.2℉, -1.4℉, from maximum temperature. A point of time at which 90% of samples reach at optimum temperature is identified and defined as optimum time. The study sample, a total of 164 cases were divided into two groups according to their measured body temperature. The group with body temperature below 37 $^{\circ}C$(A group) and above 37$^{\circ}$1'C (B group) were compared on the time required to reach maximum temperature and optimum temperature. The results are as follow. 1. The time required for total sample to reach maximum temperature was 13 minutes in both groups by oral method, 15 minutes in A group and 13 minutes in B group by axillary method. Time required for 90 % of cases reach maximum temperature by oral method was 10 minutes in both group. By axillary method, 12 minutes in A group. (Ref: table 2) 2. Statistical analysis by means of T-test, the time which does not show a significant change by oral method were 12 minutes in A group and 11 minutes in B group, and by axillary method 14 minutes in A group and 11 minutes in B group. (Ref: table 5, 6.) 3. Where optimum temperature was defined as maximum temperature minus 0.2 ℉, optimum time was found 8 minutes in both groups by oral method, and 11 minutes in A group and 9 minutes in B group by axillary method 4. Where optimum temperature was defined as maximum temperature minus 0.4 ℉, optimum time was found 7 minutes in A group and 6 minutes in B group by oral method, and 9 minutes in A group and 7 minutes in B group by axillary method 5. Where optimum temperature was defined as maximum temperature minus 0.8 ℉, optimum time was found 6 minutes in A group and 6 minutes in B group by axillary method (Ref: table 7, 8, 9, 10) 6. The commonly practiced temperature taking time, 3 minutes in oral method and 5 minutes in axillary method can be accepted as pertinent when physiological variation of body temperature at the mean level of -1, 2 ℉ is accepted. 7. The difference in time required to resister maximum temperature was compared between the group with body temperature below 37$^{\circ}C$ and above 37$^{\circ}$1'C, and found no significant difference in oral mettled and 1 - 4 minute difference in axillary method with shorter time requirement in feverish group.

• Journal of the Korean Dietetic Association
• /
• v.7 no.1
• /
• pp.38-49
• /
• 2001

This study was designed to analyze the dietetic practitioner's job in the over 600-ed hospitals in korea and to assess their labor time spent and staffing need indices. The actual time spent and expected labor time spent on dietitians' activities were investigated and the proper dietic staffing needs in the hospitals was also calculated. A job analysis questionnaires were developed and mailed to 20 hospitals. Completed questionnaires were received form 12 hospitals for a response rate of 60%. The followings are summary of the results. 1. The jobs dietitians at the hospitals were classified into the following 7 areas, direct patient care, indirect patient care, therapeutic patient care, education & counseling, meeting & research, delay & movement, and administration & food services. 2. The actual time spent on dietetic practice was 48.6 hours and expected labor time spent was 99.2 hours, Therefore, the proper time required to conduct classified jobs was 2.1 times higher than the time spent. Especially, the time required for performing clinical nutrition services including direct patient care, indirect patient care, therapeutic patient care was significantly higher than the time needed. 3. The average times required for the direct patient care was 1334.6min, for the indirect patient care was 796.3min, for the therapeutic patient care was 1634.5min, for the education & counseling was 265.2min, for the meeting & research was 366.7min, for the delay & movement was 327.3min, and for the administration & food services was 1170min. The staffing need indices was 12.3. As a conclusion, the standardized job descriptions for the dietitian to carry out their job at the hospital should be established. And the clinical dietitians as nutrition professionals have to be recruited to provide systematically hospitalized patients with medical nutrition therapy at each hospital.