• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.93-103
• /
• 2011

This study was implemented to verify the feasibility of motor function recovery and the appropriate period for therapy. The research began with spinal laminectomy of 40 white rats of Sprague-Dawley breed and induced them spinal crush injury. Following results were obtained by using the modified Tarlov test (MTT), Basso, Beattle, Bresnahan locomotor rating scale (EBB scale) and modified inclined plate test (MIPT). First, the measurement using the MTT confirm that the most severe aggravation and degeneration of functions are observed two days after induced injury, and no sign of neuromotor function recovery. Second, better scores were achieved by open-ground movement group on BBB locomotor rating scale test, and weight-bearing on inclined plate group show better performance on MIPT. Third, both BBB and MIPT scale manifested the peak of motor function recovery during 16th day after the injury and turn into gradual recovery gradient during 16th to 24th. Fourth, the control group showed functional recovery, however, the level of recovery was less significant when compared with group open-ground movement group and weight-bearing on inclined plate group. Hence, it was clearly manifested that the lumbar region of the spinal cord had shown the best performance when its functions were measured after the execution of specific physical training; therefore it indicated the possibility of learning specific task even in damaged lumbar regions. Thus it is expected to come out with better and more effective functional recovery if concentrated physical therapy was applied starting 4 days after the injury till 16 days, which is the period of the most active recovery.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.347-354
• /
• 2012

The recovery force and displacement occur due to the phase transformation from the martensite phase to the austenite phase induced by the mechanical loading or thermal loading. These recovery force and displacement depend on an initial geometrical configuration of SMAs and loading conditions. Although the SMAs generally generates large recovery forces, the sufficient recovery displacement cannot be expected without a proper design strategy. The functionality of SMAs is limited due to the unbalance between the large recovery force and the small recovery displacement. This study suggests the double coil SMA spring in order to amplifying the recovery displacement induced by the phase transformation. By predicting the recovery displacement of doble coil SMA springs and one coil SMA springs induced by thermal loading, we show that the double coil SMA spring not only mitigate the unbalance of performance but also have a large recovery displacement for its recovery force than one coil SMA spring.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.49-54
• /
• 2015

Molded Circucit Breaker(MCCB) is a most widely used device to protect loads from the over-current in low power level distribution system. When the MCCB interrupts the over-current, the arc discharge occurred between fixed contact and moving contact to create hot gas. By the Lorentz force due to arc current, the occurred arc is bent to the grids. The grids extend and cool and divide it for arc extinguish. In the majority cases, the MCCB protects loads by interrupting the over-current successfully but in some cases the re-ignition is occurred by hot-gas created during process of interruption. The re-ignition arises when the recovery voltage(RV) is more higher than the recovery strength between contacts and it leads to interruption fault. Therefore to find out the dielectric recovery characteristics of protecting device has a great importance for preventing interruption fault. In this paper, we studies measurement method of the dielectric recovery characteristics considering inherent attribute of the MCCB. To measure the dielectric recovery characteristic of MCCB, we makes an experiment circuit for applying the over-current and the randomly recovery voltage. The measurement methode to find out the dielectric recovery voltage of the MCCB was established and the result was based on experiment results.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1194-1205
• /
• 1999

인과적 메시지 로깅은 정상수행시 낙관적 메시지 로깅의 장점을 가지고, 회복시 비관적 메시지 로깅의 장점을 가지고 있다. 본 논문에서는 회복 프로세스들간의 비동기성을 향상시키기 위한 인과적 메시지 로깅에 기반한 새로운 회복 알고리즘을 제안하고자 한다. 기존의 인과적 메시지 로깅 기반 회복 알고리즘들은 살아있는 프로세스들의 수행을 대기시키거나, 회복 프로세스들간의 높은 동기성을 요구한다. 본 논문에서 제안하는 회복 알고리즘은 각 회복 프로세스가 자신의 회복만을 책임지게 함으로써, 여러 개의 프로세스들이 동시적으로 고장이 발생하더라도 회복시 살아있는 프로세스들의 수행을 대기시키지 않고, 회복 프로세스들 중 하나의 회복 프로세스에게만 과부하가 발생하지 않도록 한다. 또한, 제안하는 알고리즘은 각 회복 프로세스의 회복 과정이 다른 회복 프로세스의 연속적인 고장들에 의해 지연되지 않도록 한다. 본 논문에서는 제안하는 회복 알고리즘의 정당성을 증명하고, 시뮬레이션을 통해서 제안하는 회복 알고리즘이 기존 회복 알고리즘에 비해 고장난 프로세스의 평균회복시간을 단축시킨다는 것을 보여준다.Abstract Causal message logging has the advantages of optimistic message logging during failure-free execution and pessimistic message logging during recovery. In this paper, we present a new recovery algorithm based on causal message logging for improving asynchrony among recovering processes. Existing recovery algorithms based on causal message logging block the execution of live processes or require high synchronization among recovering processes. As each recovering process is responsible for only its recovery in our algorithm, the algorithm avoids blocking the execution of live processes during recovery even in concurrently multiple failures and overloading only one among recovering processes. Moreover, it allows the recovery of each recovering process not to be delayed by the continuous failures of other recovering processes. We prove the correctness of our recovery algorithm, and our simulation results show that our algorithm reduces the average recovery time of a failed process compared with the existing recovery algorithms.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.61-65
• /
• 1986

This work was to realize the wrinkling behavior of spun silk fabric. The results were obtained through the various conditions such as temperature, wrinkling time, wrinkling load and crease recovery time. The obtained results were summerized as follows : 1. Wrinkle recovery of the silk fabric was decreased with the increase of temperature, humidity and the influence of humidity was superior to the influence of temperature. 2. The change of wrinkle recovery depending on the wrinkle recovery time showed the experimental equation (Y=a+b lnT). The wrinkle recovery increased with the lapse of wrinkle recovery time but arrived at the equilibrium position about 300 sec. 3. The value "K1" of the silk fabric in the "Voigt model" was inferior as compared with the polyester and Nylon. 4. The change of wrinkle recovery depending on the wrinkling time was decreased with the lapse of wrinkle recovery time but the change of the value "a" could not be fined. 5. The change of wrinkle recovery depending on the wrinkling load was same as above 4.

• Korean Journal of Exercise Nutrition
• /
• v.24 no.2
• /
• pp.6-10
• /
• 2020

[Purpose] Milk is a commonly ingested post-exercise recovery protein source. Casein protein, found in milk, is characterized by its slow digestion and absorption. Recently, several studies have been conducted with a focus on how pre-sleep casein protein intake could affect post-exercise recovery but our knowledge of the subject remains limited. This review aimed at presenting and discussing how pre-sleep casein protein ingestion affects post-exercise recovery and the details of its potential effector mechanisms. [Methods] We systematically reviewed the topics of 1) casein nutritional characteristics, 2) pre-sleep casein protein effects on post-exercise recovery, and 3) potential effector mechanisms of pre-sleep casein protein on post-exercise recovery, based on the currently available published studies on pre-sleep casein protein ingestion. [Results] Studies have shown that pre-sleep casein protein ingestion (timing: 30 minutes before sleep, amount of casein protein ingested: 40-48 g) could help post-exercise recovery and positively affect acute protein metabolism and exercise performance. In addition, studies have suggested that repeated pre-sleep casein protein ingestion for post-exercise recovery over a long period might also result in chronic effects that optimize intramuscular physiological adaptation (muscle strength and muscle hypertrophy). The potential mechanisms of pre-sleep casein protein ingestion that contribute to these effects include the following: 1) significantly increasing plasma amino acid availability during sleep, thereby increasing protein synthesis, inhibiting protein breakdown, and achieving a positive protein balance; and 2) weakening exercise-induced muscle damage or inflammatory responses, causing reduced muscle soreness. Future studies should focus on completely elucidating these potential mechanisms. [Conclusion] In conclusion, post-exercise ingestion of at least 40 g of casein protein, approximately 30 minutes before sleep and after a bout of resistance exercise in the evening, might be an effective nutritional intervention to facilitate muscle recovery.

• Asia Marketing Journal
• /
• v.17 no.2
• /
• pp.39-62
• /
• 2015

Relatively little studies have investigated employee recovery from internal service failure, especially from the employees' perspective. When handling customer complaints, employees must not only deal with legitimate customer demands after a service failure, such as providing an apology, rectifying the problem, and offering compensation, but they must also manage illegitimate dysfunctional customers, who may yell, threaten, and even physically harm the employee. These negative experiences can have strong effects, and employees can exhibit higher levels of stress such as burnout and emotional labor, which have been linked to dissatisfaction, tension and anxiety, reduced performance and effectiveness, and a greater propensity to leave the firm, ultimately leading to negative financial consequences for the firm. These conditions result in internal service failure and create the need to recover employees-in other words, internal service recovery. However, little research has examined this issue so far. The purpose of the current study, therefore, is to investigate the relationship between internal service recovery and employee outcomes. A pre-test, post-test between-subjects experimental design was developed. Participants were 166 part-time students who were working full-time. The average age of the participants was 36.74 years, and 57.50% of them were female. The average length of employment was 13 years. Participants were randomly assigned to one of four groups of approximately equal size. Three of the groups were subjected to an experimental situation involving an internal service failure, while one group was not exposed to failure, thereby acting as a control group. This study contributes to the service marketing literature in several ways. First, the study extends service failure and/or recovery research by examining recovery in an employee context. Second, this study attempts to measure internal service recovery and to empirically demonstrate its relationship to employee outcomes. Third, this investigation emphasizes the managerial importance of internal service recovery. For example, understanding the nature of the relationships between internal service recovery and its consequences can improve the effectiveness and efficiency of managers' resource allocation decisions.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.27-32
• /
• 2001

A statistical study has been performed of the magnetic storm recovery phase using the Dst index for 102 storm events in the interval January 1996 to December 1998. In 43 cases (or 42%) out of our 102 events, the recovery phase exhibits fast recovery (kaking about 8 hours or less) at its initial stage or for the entire recovery period. Since this fast recovery can be explained by the fast charge exchange less of $O^{+}$ ions which mostly com from the ionosphere, and since a fraction of $H^{+}$ ions is of ionospheric origin as well, our statistical result supports the view that the source of ring current ions in many magnetic storms can be terrestrial.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.159-178
• /
• 1999

As Electronic Commerce is getting larger, the volume of Internet-based commerce by enterprise is also getting larger. This phenomenon applies to Internet EDI, Global Internet Business, and CALS information services. In this paper, a new type of cryptographic key recovery mechanism satisfying requirements of business environment is proposed. It is also applied to enterprise information infrastructure for managing employees' task related to handling official properties of electronic enterprise documents exchange. This technology needs to be complied to information management policy of a certain enterprise environment because behavior of cryptographic key recovery can cause interruption of the employees' privacy. However, the cryptographic key recovery mechanism is able to applied to any kind of information service, the application areas of key recovery technology must be seriously considered as not disturbing user's privacy It will depend on the policy of enterprise information management of a specific company.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.812-815
• /
• 2007

To apply the superconducting fault current limiter(SFCL) into a power system, the analysis for its recovery characteristics as well as the consideration for its cooperation with other protecting machine such as a circuit breaker is required. The recovery characteristics of the flux-lock type SFCL like its current limiting characteristics are dependent on the winding direction of two coils. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. From the analysis on the experimental results due to the winding direction of two coils, the limited fault current in case of the additive polarity winding was observed to be lower than that for the case of the subtractive polarity winding. In addition, the recovery time was found to be faster in case of the additive polarity winding compared to the subtractive polarity winding.