• Journal of Korea Water Resources Association
• /
• v.45 no.3
• /
• pp.331-347
• /
• 2012

The downstream of the Nam River Dam is crucial region for long-term water resource planning for Busan and Gyeongnam Province. Thus, the analysis of flow behavior and water quality is necessary for the sustainable surface water management and the control of pollutant source. In this study, the flow field and BOD transport at the downstream of Nam River Dam were analyzed by incorporating 2-D water quality model, RAM4 and 3-D water quality model, WASP with the hydrodynamic model, RAM2 and EFDC, respectively. The application of 2-D flow analysis model, RAM2 showed that velocity distributions at the five transverse sections of the meandering part closely followed the measured values by ADCP, and the flow field and overflow characteristic at the submerged weir showed satisfactory performance compared with the result of 3-D EFDC model. In addition, the BOD concentration field obtained by RAM2-RAM4 coupled modeling was in good agreement with the result by EFDC-WASP model throughout the computational domain. The hydrodynamic characteristic and water quality at the downstream reach of Nam River Dam are mainly influenced by the Dam discharge, and the water quantity is closely related to the water quality control and fishery environment at the lower part of Nakdong River. Therefore, when further quantitative analysis is necessary regarding these issues, 2-D semi-coupled modeling is recommended in terms of computational effectiveness and model application aspect.

• International Journal of Reliability and Applications
• /
• v.2 no.4
• /
• pp.269-280
• /
• 2001

The objective of this paper is to provide a model for effective implementation of costing RAM management in the design and procurement of production facility considering the system cost-performance trade-off. This research proposes a two-step approach of costing RAM design and test of system RAM for production facility. In Step 1, a static model is proposed to find an initial system configuration to meet the required performance based on system RAM and LCC and analyzes the trade-off relationships between various factors of RAM and LCC. In the second Step, we developed time and failure truncated models for system reliability test and analysis. For the computational purpose, we developed computer programs and have shown the sample results. By the sample test run, the proposed model has shown the possibilities to provide a good method to analyze system performance evaluation for both design and operational phase, This model can be applied to a wide variety of systems not only for costing RAM of the production facilities but also for the other kinds of equipment.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.44-51
• /
• 2018

The purpose of RAM analysis in weapon systems is to reduce life cycle costs, along with improving combat readiness by meeting RAM target value. We analyzed the sensitivity of the RAM analysis parameters to the use of the operating system by using the Markov Process based model (MPS, Markov Process Simulation) developed for RAM analysis. A Markov process-based RAM analysis model was developed to analyze the sensitivity of parameters (MTBF, MTTR and ALDT) to the utility of the 81mm mortar. The time required for the application to reach the steady state is about 15,000H, which is about 2 years, and the sensitivity of the parameter is highest for ALDT. In order to improve combat readiness, there is a need for continuous improvement in ALDT.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.120-130
• /
• 2016

Considering the applicability of Kuz-Ram model, which has been used extensively for predicting rock fragmentation size distribution by blasting, to domestic open-pit limestone mine, a total of 21 blasting tests have been executed at an open-pit limestone mine in eastern Gangwon of South Korea. A comparative analysis of field measured value and Kuz-Ram predicted value showed that there are a considerable amount of error in the predicted values regardless of application of various correction parameters for rock factor and uniformity factor; up to 56.45% in mean fragmentation size and 37.52% in uniformity index. Also the problem of applying different correction parameters has been derived even though a similar blasting pattern has been adopted for a same blasting bench. The authors therefore suggest that Kuz-Ram model needs to be modified for a proper application to domestic open-pit limestone mine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.23-25
• /
• 1996

In this paper aims at studying the minimal test pattem of the RAM. This also propose a scheme of testing faults from the new fault model using the LLB. The length of test patterns are 6N(1-wsf), 9.5N(2-wsf), 7N(3-wsfl, 3N(4-wsf) operations in N-bit RAM. This test techniques can write into memory cell the number of write operations is reduced and then much testing time is saved. A test set which detects all positive-negative static t-ws faults for t=0, 1, 2, 3, 4 and detects all pattern sensitive fault in memory array. A new fault model, which encompasses the existing fault model Is proposed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.228-236
• /
• 2021

In order to understand the underwater noise source factor of the linear pump type forced ejection system, a reduced-model compressed water experiment device was developed. The reduced-model compressed water experiment device consists of a reverberation tank, a linear pump type forced ejection device, and an underwater vehicle. The underwater noise source was selected from the hydraulic ram moving speed, the hydraulic ram/piston pipe spacing, the ejection pipe inlet/water ram area ratio, and the number of water ram inlets. The underwater vehicle was ejected into the reverberation tank by the device. The source level was derived from the measured sound pressure. The source level tends to increase as the hydraulic ram/piston tube spacing and the hydraulic ram moving speed increase. The source level tended to increase as the area ratio was increased, but the level was weak. The number of water ram inlet did not affect the source level.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.895-899
• /
• 2009

실제 하천에서는 지형적 이산화에 따른 복잡성으로 인해 마름/젖음 현상이 발생하며 그로 인해 작은 수심에서 수치해석의 안정성에 영향을 주어 해석을 불가능하게 한다. 자연수로는 저수시 및 평수시에 물을 소통시키는 주수로부와 홍수시 수위 상승에 따라 주수로부에서부터 범람하게 되는 홍수터로 구성된다. 홍수터는 홍수류의 일시적인 저장이나 하류로 흐름을 전달하는 복합수로의 부분으로 사용된다. 자연수로에서 이와같은 흐름구조는 불규칙한 단면형상, 조도계수 등에 의해서 더욱 복잡하게 나타난다. 본 연구에서는 복잡한 지형과 자연 하천구조에 대한 동역학적인 흐름특성을 해석하고 오염물질의 이송-확산 해석 및 토사이송 해석과 연계하기 위해서 개발된 RAM-2 모형에 동수역학적 해석을 실시하였다. RAM-2 모형에는 대상하도에 대한 마름/젖음의 처리를 위해 흐름의 시간별 수위상승 및 하강 속도를 고려한 Deforming Grid 기법을 적용하였으며, 이에 대한 적용성을 검토하기 위해 마름/젖음 조건을 가지는 실험수로와 홍수터를 가진 사다리꼴 단면 그리고 실제 하도에 대해 적용하여 그 결과를 살펴보았다.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.98.1-98.1
• /
• 2010

본 연구에서는 한강 본류 팔당댐부터 잠실수중보까지의 22.5 km 구간에서 발생할 수 있는 수질 오염사고에 대한 오염물질 혼합거동 모의를 위해 RAMS를 이용하였다. 이를 위해서 2차원 흐름모형인 RAM2를 이용하여 유속장을 모의하고, 2차원 수질해석 모형인 RAM4를 이용하여 사고주입에 의한 오염물질의 시간에 따른 거동을 분석하였다. 최종적으로 잠실수중보에 위치한 주요 취수장에 미치는 영향을 분석하였다. 모의를 진행한 결과 오염물질의 이송 및 확산 거동은 투입 위치에 따라 크게 달라진다는 것을 알 수 있었다. 특히 팔당대교에서 투입된 오염물질이 풍납 취수장에 도착하는데 까지 걸리는 시간이 좌안주입과 우안주입의 경우 60시간 가까이 차이가 나는 것으로 나타났다. 따라서 오염 물질이 투입되었을 시에 일괄적으로 취수를 통제할 것이 아니라 상황에 따라 오염물질 투입 지점에 맞춰서 적절한 대책을 세워야 하는 것이 필요하다. 이 때 본 연구가 기초적인 정보를 제공할 수 있을 것이다.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.536-541
• /
• 2018

Excess molar volumes ($V_m^E$) of binary mixtures of 1-propanol or 2-propanol (1) + cyclohexane or n-hexane (2) were measured with V-shaped dilatometer at 303.15 K. The $V_m^E$ data for these mixtures varied as: 2-propanol > 1-propanol and were higher for cyclohexane than n-hexane for both propanol systems. The experimental data were correlated with Redlich-Kister polynomial. The $V_m^E$ data were interpreted qualitatively as well as quantitatively in terms of Flory-Treszczanowicz-Benson model and Prigogine-Flory-Patterson theory. Both models correctly described the sign and shape of $V_m^E$ vs $x_1$ curves. The values calculated by both the models agree well with the experimental data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.218-230
• /
• 2000

In the weapon system development/operation stage, the goals of RAM activities are to support the cost effective performance optimization in design and operation supports. In the study, the main contents are as follows; 1) To establish the operational concept and circumstance of the subsequent tank, the combat/operation scenario, the operational mode summary and mission profile for subsequent tank development are analyzed. 2) To evaluate the administrative and logistics down time for subsequent tank, the prefigured logistics circumstance and maintenance system are analyzed. 3) To calculate the RAM object values, a mathematical model for the user are developed. 4) To examinate the propriety of the RAM object values, the combat readiness are reviewed. The obtained RAM object values are provided to predict and analyze for the combat readiness, staying power, mission reliability, equipment availability and the logistic support capability.